unlopping a tw card - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

River-Rat · 18-12-08, 03:18 PM

been 3 years since i did one, so i have forgot

as far as i remember my t911 is flashed

im trying to do one today, but so far 1hour in and nothing....

using the mike script and keep getting time outs?

MIKEDATA DUAL UNLOOPER AND CHARTMAN WIZARD UNLOOPER SCRIPT VER 2.0 ROM10 REV A86 AND ROM11 BOD

The Current IRD On The Card Is:9D9DCD45

===Here-We-Go-Again===

Your Vcc Should Be Set To 19 Or 1B (Around 1A Is Best)!!! For The Rev A86 Only

Start glitching 5A01 Rom 11 RevB0D at 15:20:07 18/12/2008
Flash : ????, Glitch Type : 06-09
Delay : 0090, VCC : 30(~0.94118 Vdc): -------------------+------------------------------+------------------+--------------------+------------------+------------------+----+-----+-----------

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script

Script Error on Line 154
Sc.GetByte: Requested Byte Exceeds Last Read Request

G77 · 18-12-08, 03:34 PM

sidewinder.

River-Rat · 18-12-08, 04:04 PM

i just tried that

says it found my com port, and is doing something, but i see no data light flashing on my t911?

G77 · 18-12-08, 04:12 PM

yeah. i dont have any lights flash on my powersync. does it come up with the ++++----++-++--+--+ ect?

whats the vdc saying top right?

River-Rat · 18-12-08, 04:19 PM

18 19 flashing, loads of rst coming up ect?

G77 · 18-12-08, 04:20 PM

what type of card are you doing?

pm me a screen shot

River-Rat · 18-12-08, 04:21 PM

doing a tw card

ok 1 sec

G77 · 18-12-08, 04:24 PM

i mean is it a rom10 rom11?

sidewinder should tell you what card it is.

River-Rat · 18-12-08, 04:26 PM

11 mate as per pm

G77 · 18-12-08, 04:30 PM

funky, got your screen shot, thats all ok but you now want to twiddle the pot very slowly so you get a vdc of about 25. (ignore the red/green, thats for rom10's)

chances are by the time you get to 25 it will have popped. if not, leave it 5 mins and it will have by then.

also, when it hits 9000, it will bleep and say sending ird writeback packet..... then it will either return your ird on screen to show you that the ird has been written back on the card (in which case, totally sucessfull unloop) or it will hang.

if it hangs, twiddle the pot very slowly the oposite way you turned it to increase vdc. ie, decreasing vdc, watch the screen and it should write back the ird.

dont be tempted to close sidewinder before it writes back the ird. it will do it with patience and a bit of twiddling.

18-12-08, 03:18 PM	#1 (permalink)
River-Rat Ex cable guy Join Date: Apr 2007 Posts: 2,780 Thanks: 62 Thanked 385 Times in 281 Posts	unlopping a tw card been 3 years since i did one, so i have forgot as far as i remember my t911 is flashed im trying to do one today, but so far 1hour in and nothing.... using the mike script and keep getting time outs? MIKEDATA DUAL UNLOOPER AND CHARTMAN WIZARD UNLOOPER SCRIPT VER 2.0 ROM10 REV A86 AND ROM11 BOD The Current IRD On The Card Is:9D9DCD45 ===Here-We-Go-Again=== Your Vcc Should Be Set To 19 Or 1B (Around 1A Is Best)!!! For The Rev A86 Only Start glitching 5A01 Rom 11 RevB0D at 15:20:07 18/12/2008 Flash : ????, Glitch Type : 06-09 Delay : 0090, VCC : 30(~0.94118 Vdc): -------------------+------------------------------+------------------+--------------------+------------------+------------------+----+-----+----------- Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script Script Error on Line 154 Sc.GetByte: Requested Byte Exceeds Last Read Request __________________ 1 meter dish with octo lnb, xtrend et9200HD e2 box, 50inch Panasonic vt30. ps3, lg cinema sound

18-12-08, 03:34 PM	#2 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: unlopping a tw card sidewinder. __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

18-12-08, 04:04 PM	#3 (permalink)
River-Rat Ex cable guy Join Date: Apr 2007 Posts: 2,780 Thanks: 62 Thanked 385 Times in 281 Posts	Re: unlopping a tw card i just tried that says it found my com port, and is doing something, but i see no data light flashing on my t911? __________________ 1 meter dish with octo lnb, xtrend et9200HD e2 box, 50inch Panasonic vt30. ps3, lg cinema sound

18-12-08, 04:12 PM	#4 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: unlopping a tw card yeah. i dont have any lights flash on my powersync. does it come up with the ++++----++-++--+--+ ect? whats the vdc saying top right? __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root. Last edited by G77; 18-12-08 at 04:15 PM.

18-12-08, 04:19 PM	#5 (permalink)
River-Rat Ex cable guy Join Date: Apr 2007 Posts: 2,780 Thanks: 62 Thanked 385 Times in 281 Posts	Re: unlopping a tw card 18 19 flashing, loads of rst coming up ect? __________________ 1 meter dish with octo lnb, xtrend et9200HD e2 box, 50inch Panasonic vt30. ps3, lg cinema sound

18-12-08, 04:20 PM	#6 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: unlopping a tw card what type of card are you doing? pm me a screen shot __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

18-12-08, 04:21 PM	#7 (permalink)
River-Rat Ex cable guy Join Date: Apr 2007 Posts: 2,780 Thanks: 62 Thanked 385 Times in 281 Posts	Re: unlopping a tw card doing a tw card ok 1 sec __________________ 1 meter dish with octo lnb, xtrend et9200HD e2 box, 50inch Panasonic vt30. ps3, lg cinema sound

18-12-08, 04:24 PM	#8 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: unlopping a tw card i mean is it a rom10 rom11? sidewinder should tell you what card it is. __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

18-12-08, 04:26 PM	#9 (permalink)
River-Rat Ex cable guy Join Date: Apr 2007 Posts: 2,780 Thanks: 62 Thanked 385 Times in 281 Posts	Re: unlopping a tw card 11 mate as per pm __________________ 1 meter dish with octo lnb, xtrend et9200HD e2 box, 50inch Panasonic vt30. ps3, lg cinema sound

18-12-08, 04:30 PM	#10 (permalink)
G77 Super Moderator Join Date: May 2008 Posts: 6,118 Thanks: 695 Thanked 1,250 Times in 1,044 Posts	Re: unlopping a tw card funky, got your screen shot, thats all ok but you now want to twiddle the pot very slowly so you get a vdc of about 25. (ignore the red/green, thats for rom10's) chances are by the time you get to 25 it will have popped. if not, leave it 5 mins and it will have by then. also, when it hits 9000, it will bleep and say sending ird writeback packet..... then it will either return your ird on screen to show you that the ird has been written back on the card (in which case, totally sucessfull unloop) or it will hang. if it hangs, twiddle the pot very slowly the oposite way you turned it to increase vdc. ie, decreasing vdc, watch the screen and it should write back the ird. dont be tempted to close sidewinder before it writes back the ird. it will do it with patience and a bit of twiddling. __________________ 1M Motorised Dish, 45W-36E, DM800HD. Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500. Samsung Galaxy S GT-I9000 XXJVU & CF-Root.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2110 Card Marked	yusuf_gaz	Cable TV Chat	9	26-09-08 08:26 PM
NTL Card Question	arrows	Cable TV Chat	17	02-07-08 08:19 PM
Will I be able to watch the BBC HD trial on my Skystar card?	BGonaSTICK	Satellite TV on PC	4	25-05-06 12:52 AM