need a bit of help plz

[jack the kipper]

hi just tried to use the ftp pro iam havin a bit on bad luck with it when i put all my settings in all it is sayin connection failed i tried all the passwords but no luck , plz help

[goonerchris]

Originally Posted by jack the kipper

hi just tried to use the ftp pro iam havin a bit on bad luck with it when i put all my settings in all it is sayin connection failed i tried all the passwords but no luck , plz help

Here's a quick guide on how to transfer the nagrarom7 file using FTP.

What’s required - HARDWARE:

1. DBox2
2. RJ45 Network Crossover cable. (NOT an ethernet cable)
3. PC (this was done using windows XP) with a network card.


What’s Required – SOFTWARE:

FTP program eg. “Flash FXP” (30-day trial version works fine).
You can download this from the Private FTA.


Let’s Get Started:

To make this easier, place your tv/box close to your PC
(so that you have easy access to the back of both, to change cables around.)


1. PC Setup: Now would be a good time to create a ‘System Restore Point’ on your PC,
(as you will have probably have to change the IP settings, to something different from your internet settings).

Unplug your internet connection NOW to avoid any conflicts.

Switch OFF all firewalls and antivirus on your PC
(and make sure windows XP built in firewall is OFF)


2. Power on the TV and DBox, but don’t hook it up to your PC yet.

Using the remote control, press DBOX > SETTINGS > NETWORK
Take a note of the DBox network settings
(this is an example only)

IP-Address 192.168.0.3
Net Mask 255.255.255.0
Broadcast 192.168.0.255
Def Gateway 192.168.0.2
Name Server 192.168.0.2


3. On the PC go to START BUTTON > SETTINGS > CONTROL PANEL and open the NETWORK CONNECTIONS

Right-click the network card (it may say Local Area Connection),
and select PROPERTIES > CONFIGURE > ADVANCED tab

Highlight the ‘Connection Type’ (in the left window),
and in the right ‘Value window there is a drop down menu (it will probably currently say automode)
Change the Value to 10 full mode then OK

Again, right-click the same connection, and go back into the PROPERTIES of the network card
There is a List of items in the first window (you may need to scroll down further)
Left-click on internet protocol, when it is highlighted, click the PROPERTIES button.

Select the ‘Use the following IP address’
Enter the settings, as you seen it on your DBox, except the IP address will be one digit less of the last number
(eg. 192.168.0.3 on DBox, so use 192.168.0.2 on your PC)

OK these settings.


4. Connect the RJ45 cable between PC and DBox (linking them together)

Run the Flash FXP program
On one side should be the files on the PC
On the other side make sure you select ‘ftp browser’ (the tab is a monitor and folder picture)
(It may already be selected)

Click CONNECT (the icon which looks like a lightening bolt)

Select QUICK CONNECT the three boxes require some information
SERVER OR URL = (enter the IP address of the DBox)
USERNAME = root
PASSWORD = dbox or dbox2 or commando

Then click CONNECT

You should now see the DBox files in the window (if not, check the IP settings/password).


5. In the PC file window, browse to the folder containing the nagrarom7 file.

In the DBox window browse to the var/keys folder (NOTE: you may already be in this folder).

Transfer the nagrarom7 file across into the var/keys folder

Delete any other nagrarom(10/11... etc) files

When done close down the Flash FXP program.

You may need to Enable Autoupdates on your Image (search forum on how to do this).

Now reboot the DBox

Switch to a non-FTA channel. Wait a few minutes for codes to update.

6*. You may want to use the ‘System Restore’ program now, on your PC,

Select ‘Restore To An Earlier Time’ and choose the correct point
Turn back ON your firewall, and virus checker
Connect back onto the internet, and online to the forum
Let us know if you have any problems.


Thanks to SUBZERO for this Tutorial

[jack the kipper]

thanks got it workin but will not let me scan for channels

[goonerchris]

Originally Posted by jack the kipper

thanks got it workin but will not let me scan for channels

Where abouts are you, and what provider are you with?

[jack the kipper]

i am in burnley and its ex c&w thanks

[quavis]

scan using sym6952

as a last reosrt use all uk scanning or bruteforce depending on image used.

regards dave

[THORN]

Have you set your area

[jack the kipper]

yes done all that still only found 1 transponder well ****ed off lol

[THORN]

I have recently re-flashed due to all the channels going.The new Lincast is working but a couple of times the channels have gone and when I re-scan there are no transpoders until I reset the area again