I think i bricked the Box! Eurovox Max Blue - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

kalel6000 · 19-12-08, 09:36 PM

My auntie gave me her box to fix which i though was the same as mine, which a geniune blue box. So being a total idiot i went ahead and flashed my auntie's box with the latest fix for original boxes. But when i connected it to the t.v all i get is a blue screen and 0001 on the display with the remote control only good for turning the box on or off. I getting kinda worried now as i dont know what to do. Any advice/help would be gretaly appreciated.

lucky13 · 19-12-08, 10:23 PM

Reflash it with the clone firmware date 10/12/08

ronster · 19-12-08, 10:30 PM

You will probably need to reset it before it will take another flash!

You need to connect the box to tv with an RF cable (not scart) then tune it in until you see a pin request screen.

Enter 1004 then do a factory reset this will then allow you to reflash with clone safe firmware and also bring the scart back to life

kalel6000 · 19-12-08, 11:58 PM

thanks mate! sounds good, i'll give it a try

cashy3 · 20-12-08, 12:07 AM

Read This m8

eurovox max blue crashed display says 2074

19-12-08, 09:36 PM	#1 (permalink)
kalel6000 Junior Member Join Date: Apr 2008 Posts: 5 Thanks: 7 Thanked 1 Time in 1 Post	I think i bricked the Box! Eurovox Max Blue My auntie gave me her box to fix which i though was the same as mine, which a geniune blue box. So being a total idiot i went ahead and flashed my auntie's box with the latest fix for original boxes. But when i connected it to the t.v all i get is a blue screen and 0001 on the display with the remote control only good for turning the box on or off. I getting kinda worried now as i dont know what to do. Any advice/help would be gretaly appreciated.

19-12-08, 10:23 PM	#2 (permalink)
lucky13 LOOK-KEY 13!!!! Join Date: Jun 2007 Posts: 2,130 Thanks: 15 Thanked 474 Times in 398 Posts	Re: I think i bricked the Box! Eurovox Max Blue Reflash it with the clone firmware date 10/12/08 __________________ Every forum has rules - read them to know them!

19-12-08, 10:30 PM	#3 (permalink)
ronster Senior Member Join Date: Jan 2007 Location: Here Posts: 2,398 Thanks: 140 Thanked 981 Times in 529 Posts	Re: I think i bricked the Box! Eurovox Max Blue You will probably need to reset it before it will take another flash! You need to connect the box to tv with an RF cable (not scart) then tune it in until you see a pin request screen. Enter 1004 then do a factory reset this will then allow you to reflash with clone safe firmware and also bring the scart back to life

19-12-08, 11:58 PM	#4 (permalink)
kalel6000 Junior Member Join Date: Apr 2008 Posts: 5 Thanks: 7 Thanked 1 Time in 1 Post	Re: I think i bricked the Box! Eurovox Max Blue thanks mate! sounds good, i'll give it a try

20-12-08, 12:07 AM	#5 (permalink)
cashy3 Senior Member Join Date: Apr 2008 Location: Behind You. Posts: 388 Thanks: 33 Thanked 51 Times in 47 Posts	Re: I think i bricked the Box! Eurovox Max Blue Read This m8 eurovox max blue crashed display says 2074 __________________ Just because i'm paranoid doesn’t mean no ones after me!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Easy Guide to Updating your Eurovox	ryanrandom	Eurovox	216	23-06-10 09:21 PM
Eurovox Blue box locking up after 30/11 patch	selsdon500	Eurovox	3	11-12-08 11:39 PM
Eurovox Max V Box Help needed Please	gray	Eurovox	1	06-12-08 10:06 AM
Eurovox Blue, Red, Black, EX1000, EX5000 All Released!	moeiom	Eurovox	12	05-12-08 01:45 AM
EuroVox Max Blue. Many thanks.	mwman	Eurovox	3	02-12-08 11:35 PM