Max Blue Box Stuck on 0006 Help!

[desi]

So, i flashed the box with the latest firmware from the bigmaq toolbar. I pluged it in and the channel list that i uploaded to the box was displaying weird charecters. So i did a auto-scan and the same thing happend. I unpluged and then pluged the box in and now the box is just stuck on channel 0006, i can't even turn it on or off via remote or the box.

Any help is appriciated.

Thanks,
Desi

[hammy545]

hi mate is the box a clone? if so u will need to go back to april firmware, connect via 'aerial' wire and do a channel scan on tv..ur eurovox should be back up...after its back up pin is 1004 do a factory reset and flash with latest firmware

[desi]

No, its an original. When i plug it in i see the epg for when you change channel or something but then that dissapears. I flashed it to April's firmware and it's shill stuck.

Thanks

[hammy545]

hmm connect it using aerial do a channel scan on ur tv and reset to factory settings thats all i can say bro

[HONCHO]

Originally Posted by desi

No, its an original. When i plug it in i see the epg for when you change channel or something but then that dissapears. I flashed it to April's firmware and it's shill stuck.

Thanks

flash with newest firmware brpo aprils is oot oh date

then go to skysports 1 andleave it there

it will update and au again kk

[desi]

Guys, i don't think you understand, It's frozen! I can't do anything, i can't use the remote, i can't even use the buttons on the actual box, it's just stuck on 0006, thats it, nothing more, nothing less.

Sorry if that sounds rude.

[yahamatahir]

Originally Posted by hammy545

hmm connect it using aerial do a channel scan on ur tv and reset to factory settings thats all i can say bro

Hi

I have the same problem with my box... it is stuck. I did scan TV channel with Aerial (Coaxial) Cable. I managed to get enter pen frequency linked with the eurovox but the problem is how we can insert the pin? The TV remote is not working for input for Box and Box itself is stuck as its not taking any command from Remote Control of the box. So what we can do....any help and comment plz.....?

[desi]

Okay, fixed it guys, here is what i did.

As i could not get the box to do anything, i tried to fix that problem first, i did this by holding the power button on the box during boot up, this put the box into stand-by, because of this i was able to use the control to turn the box on and then quickly enter the menu to factory reset. Once i did that i updated to the latest firmware and scaned for channels and bingo! it worked.

Thanks for the help guys.

Desi

[yahamatahir]

Originally Posted by desi

Okay, fixed it guys, here is what i did.

As i could not get the box to do anything, i tried to fix that problem first, i did this by holding the power button on the box during boot up, this put the box into stand-by, because of this i was able to use the control to turn the box on and then quickly enter the menu to factory reset. Once i did that i updated to the latest firmware and scaned for channels and bingo! it worked.

Thanks for the help guys.

Desi

Hi Desi

I have the same problem... struggling since two days to fix it... can you tell me how you did it...? I will appreciate your help

[desi]

Sure yahamatahir.

Firstly i held down the power button on the box as i plugged it in, this put it into stand-by. Then i used the control to turn it on and quickly get in to the menu, where i did a factory reset. After this i updated it to the latest firmware and did a power scan. This solved my problem.

Desi