funcard on pace 4001

[Hennah04]

Hey, guys, I've got a pace 4001 with a paired card but I haven't been able to access the card and so have decided to write a funcard.
The original card was a rom10 card, so first question, do i have to use a rom10 image or can i use a rom11 image?
I've got the ird and bk by using led flash on the box. I have downloaded images and flash images.
I have written a mosc rom 11 before and that image is still working on another pace box so I've have tried to re-use that image but changed the ird and bk codes to match the new box and written the image to a fun card.
I have inserted the card into the 4001 box and left it awhile to map in, however, although the freeview channels appear and the card is detected, the other channels just show a blank screen. There is no message saying I'm not subscribed or anything like that, just a blank screen.
I have also tried with a rom10 image.
I am in a pure ntl area.
Hope you can help,
Rob

[Danielle]

you just need the flash file (from toolbar) then create an external bin file with toxic, load writing software i have a pheonix infinity USB load flash file and ext.bin and flash it

[Hennah04]

I've just tried that, with the same result, any more thoughts?

[lealamit]

i'm having the same problem

[Danielle]

Originally Posted by Hennah04

I've just tried that, with the same result, any more thoughts?

Cant have done it right reverse the ird in toxic
12 35 27 17 becomes 17 27 35 12 good luck

[Peter271254]

Originally Posted by Danielle

Cant have done it right reverse the ird in toxic
12 35 27 17 becomes 17 27 35 12 good luck

you dont reverse it when using toxic only when using nagra u reverse it
peter

[sqwidge]

you have to give it time to map the 4001 is old as f.uck so takes ages, if your not getting any message then you have done it right but you may have got a digit wrong on the BK go back and double check it

[homer@shack]

rom 10 or 11 image in ext eep works. ensure you use the correct flash for your area, you can enter the key 0 + 1 into the image this shoul allow access to all chanels that are active in the image used providing every thing is correct, (bk/ird)

[pello]

Originally Posted by Hennah04

Hey, guys, I've got a pace 4001 with a paired card but I haven't been able to access the card and so have decided to write a funcard.
The original card was a rom10 card, so first question, do i have to use a rom10 image or can i use a rom11 image?
I've got the ird and bk by using led flash on the box. I have downloaded images and flash images.
I have written a mosc rom 11 before and that image is still working on another pace box so I've have tried to re-use that image but changed the ird and bk codes to match the new box and written the image to a fun card.
I have inserted the card into the 4001 box and left it awhile to map in, however, although the freeview channels appear and the card is detected, the other channels just show a blank screen. There is no message saying I'm not subscribed or anything like that, just a blank screen.
I have also tried with a rom10 image.
I am in a pure ntl area.
Hope you can help,
Rob

if you want to do a mosc rom10 if the card is a rom10 easy to do pm me your image will fix it for you and send for you to use if its a rom11 the same ,if its a fun card use toxic add cam id then ird then bk save ,this is your bin file save to desk top you will need it in a bit ,get a working flash for your area ,people get this from the tool bar .
if you are tw it will not work as its pure only

[lealamit]

my boxkey comes up with a whole load of 0's and only one digit

i've tried it using samsung debug toole and boxket extractor they are both givin me the same boxkey number