Eurovox max blue FF01 on display - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

colbol59 · 23-12-08, 08:12 PM

hi i have a Eurovox max blue, its been working fine, i brought it up to brum from pompy, i have done this before, i just rescan and all done...but this time i have a FF01 code on the display, also the remote does not do anything, all you can do is put the box in stand by, ive done the normal stuff ....turn off held the stand by button in, im stummped.

do you guys have any ideas..

SpudGun · 23-12-08, 08:47 PM

Take case off and check the C14 capacitor, while your in there check the rest as well, reflash maybe?

ronster · 23-12-08, 08:47 PM

Your box is a clone mate so to bring it back to life you will need to:

Connect it to tv using a RF cable (not scart) and tune it in until you get a pin request screen

Enter master pin 1004 then you will need to do a factory default/system reset.

This will then bring the box/scart back to life

You will then need to flash it with blue box clone friendly firmware or the same will happen again

23-12-08, 08:12 PM	#1 (permalink)
colbol59 Junior Member Join Date: Apr 2008 Posts: 1 Thanks: 1 Thanked 0 Times in 0 Posts	Eurovox max blue FF01 on display hi i have a Eurovox max blue, its been working fine, i brought it up to brum from pompy, i have done this before, i just rescan and all done...but this time i have a FF01 code on the display, also the remote does not do anything, all you can do is put the box in stand by, ive done the normal stuff ....turn off held the stand by button in, im stummped. do you guys have any ideas..

23-12-08, 08:47 PM	#2 (permalink)
SpudGun Senior Member Join Date: Jan 2007 Posts: 219 Thanks: 26 Thanked 15 Times in 12 Posts	Re: Eurovox max blue FF01 on display Take case off and check the C14 capacitor, while your in there check the rest as well, reflash maybe?

23-12-08, 08:47 PM	#3 (permalink)
ronster Senior Member Join Date: Jan 2007 Location: Here Posts: 2,398 Thanks: 140 Thanked 981 Times in 529 Posts	Re: Eurovox max blue FF01 on display Your box is a clone mate so to bring it back to life you will need to: Connect it to tv using a RF cable (not scart) and tune it in until you get a pin request screen Enter master pin 1004 then you will need to do a factory default/system reset. This will then bring the box/scart back to life You will then need to flash it with blue box clone friendly firmware or the same will happen again

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eurovox Max Blue Bricked?	jagger2k	Eurovox	1	15-12-08 04:48 AM
Firmware Update - Eurovox Max	Zangief	Eurovox	2	26-11-08 01:27 PM
Eurovox Max Blue - Max 21-04-08 - Channels lost	Rival_D	Eurovox	2	23-10-08 07:57 PM
eurovox blue eurovox ex 1000	christaxi	Eurovox	1	18-09-08 10:02 PM
Latest Eurovox Blue File?	MarkSams	Eurovox	1	01-09-07 10:52 AM