breaking pictures no or bad signal on kryptview

[zizobouta]

flashed it with 29/11/08 with success. kryptview arnet breaking pictures and no or bad signal . tried a lot of solutions but in vain. any ideas guys
thanks

[Golden Oldie]

Originally Posted by zizobouta

flashed it with 29/11/08 with success. kryptview arnet breaking pictures and no or bad signal . tried a lot of solutions but in vain. any ideas guys
thanks

What solutions have you tried? Sounds to me like you may just have a weak signal. Are you using a splitter? If so try it without.

[Kangochad]

if you've tried all the other possible solutions and none worked

VM boxes in an area by me (partners nan) were receiving a signal that was too strong from the 'green box' i believe. The engineer said that it was a fault on their side and not a broken set top box.

They solved it by putting about 3 attenuators on, a 5db and 2 x 3db.. and i think thats quite alot.

Just a thought.

[yusuf_gaz]

Hi

You could also try putting feed in to the cable output which I read somewhere acts like an atennuator as it could be too strong a signal.

Regards

[jambutty]

if yer got pixalating channels, either signal is too weak or too strong (prob in this case too strong) ok get an attenuator, they vary in price so shop arround, these do the job 100% and sort pixalation probs out, I got a kv and no probs, sister lives 2 minutes from me and she gets pixalting mainly on movies, got her an attenuator from Maplins at £8 with the f-connectors to go in KV and SPOT ON, she's chuffed to bits.
AJ

PS Yer can Hit the thanks button fer this.

[bigto1000]

i have a box that runs of a splitter, it works fine no problems at all downstairs and in 1 room upstairs, but the room my box is in, it says no or bad signal on a few channels and pixilated on a few, and1 help a newbie out on how to fix it

[jambutty]

If you mean that you have lost some channels and coming up bad signal then same been happening to a few people near me lost ITV 2 and a few others, just factory reset/delete all channels and then re-scan the box and will pull em all back in again.
AJ

[cabmanuk]

Originally Posted by jambutty

if yer got pixalating channels, either signal is too weak or too strong (prob in this case too strong) ok get an attenuator, they vary in price so shop arround, these do the job 100% and sort pixalation probs out, I got a kv and no probs, sister lives 2 minutes from me and she gets pixalting mainly on movies, got her an attenuator from Maplins at £8 with the f-connectors to go in KV and SPOT ON, she's chuffed to bits.
AJ

PS Yer can Hit the thanks button fer this.

Hi mate,

Any chance you can send me a link for the attenuator that you bought for your sister.

Thanks cmuk

[ronster]

this will do the job mate
_http://cgi.ebay.co.uk/Aerial-Cable-TV-Satellite-Variable-Attenuator-NTL-etc_W0QQitemZ230325712387QQihZ013QQcategoryZ4693QQ ssPageNameZWDVWQQrdZ1QQcmdZViewItem

[cabmanuk]

Originally Posted by ronster

this will do the job mate
_http://cgi.ebay.co.uk/Aerial-Cable-TV-Satellite-Variable-Attenuator-NTL-etc_W0QQitemZ230325712387QQihZ013QQcategoryZ4693QQ ssPageNameZWDVWQQrdZ1QQcmdZViewItem

Thanks mate