obtaining bk

[aubrey4444]

Trying to reset card...
Reset Successful

RX ATR : 03 00 56 FF 00 76 7E 71 FA 1D FF DD 8D 7D 35 F5 F3 73 73 FB B5 59 91 BD F3 DD C3

Timeout from 58 command

when i read card using dexters winexploer this is what i get no bk
[IMG]file:///C:/DOCUME%7E1/Arran/LOCALS%7E1/Temp/moz-screenshot.jpg[/IMG][IMG]file:///C:/DOCUME%7E1/Arran/LOCALS%7E1/Temp/moz-screenshot-1.jpg[/IMG]

[Tesla]

Originally Posted by aubrey4444

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM Revision: 011
EEPROM Revision: RevB0D
SetIFS failed
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Reading ROM10 failed
Closing of COM1 was successful

The only way to get the BK without jtag is to read the N*L card and hope that it is paired. It looks like your com port is receiving data because it has picked up the atr, set ifs is the first transmission from nagra edit to the card and will expect the card to return data indicating that it has completed that task successfully. If you look in the 'comm' tab you should see this

RX: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C --- This is the atr which you received
TX: 21 C1 01 68 89 --------- This is setifs
RX: 12 E1 01 68 9A --------- This is the correct response from the card
TX: 21 00 0D A0 CA 00 00 07 21 05 06 03 FF FF 00 20
40
RX: 12 00 22 A1 1E 5C 00 00 27 79 FC B3 FF FF FF FF
FF FF FF FF FF FF 00 FF FF 00 00 FF FF 00 00 00
00 00 00 90 00 52

Do the usual stuff clean the contacts on the card etc, a number of people have had problems with usb ports for these applications especially with laptops this fault is usually something wrong with the comms setup. I prefer the old 9 pin serial com1 port that most of the software you might use was written for!!

[aubrey4444]

there is no com tab in dexters winexploer or i can't find it and yes its paired with the box just need the bk is there a nother proggy i could use

[aubrey4444]

right just tryed nagra edit 4.1 this what i got when i clicked on read card



Opening of COM3 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM Revision: 011
EEPROM Revision: RevB0D
SetIFS failed
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Reading ROM11 failed
Closing of COM3 was successful

[aubrey4444]

and the comm tab displayed this

RX: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
TX: 21 C1 01 68 89
RX: [no response]
TX: 21 C1 01 68 89
RX: [no response]
TX: 21 C1 01 68 89
RX: [no response]
TX: 21 C1 01 68 89
RX: 21 C1 01 68 89
TX: 21 C1 01 68 89
RX: [no response]
TX: 21 C1 01 68 89
RX: [no response]
TX: 21 C1 01 68 89
RX: [no response]
TX: 21 C1 01 68 89
RX: [no response]
TX: 21 C1 01 68 89
RX: [no response]
TX: 21 C1 01 68 89
RX: [no response]

[aubrey4444]

i do have a funcard as well can i just program that or do i need the bk from the box as well??

[Tesla]

Originally Posted by aubrey4444

i do have a funcard as well can i just program that or do i need the bk from the box as well??

you will need the BK for any card you write, I have no experience of the Infinity USB Unlimited other than search for other posts about people having trouble with this programmer I seem to remember there have been plenty!!!, I always prefered the infinity USB phoenix but it needs the old 9 pin serial COM1 port.

[aubrey4444]

can you give me a link for some unlooper software

thanks

[aubrey4444]

do i need to buy a unlooper separate ?

or is there software out there so i could use the infinity usb

[aubrey4444]

still having trouble getting the key