what do i need to get started

[palony]

hi what is it i need to do virgin media boxes do i have it correct

a jtag programmer
Pace and Sammy POGO cables
and a fun card programmer

also does any one have a link to a tut so i can read up on it thanks

[Hennah04]

This is quite the lazy first post, everything you need including guides are in the download section of the site.
As for what you need for pace boxes, that depends on the model of the pace box, ie:- 4001 need led simm whereas other models need jtag or a pogo jtag. You might be able to avoid using these tools by glitching the cards using a glitcher or unlooper. If you're lucky the cards may have been programmed and already be unlocked so it's just a matter of reading the card.
I haven't done sammy boxes myself but information regarding sammy boxes are in the download section.
You need to be more specific with your post as to what model box you are dealing with and look in the download section of this site to find tutorials, files and programs.

[Roco]

Originally Posted by palony

hi what is it i need to do virgin media boxes do i have it correct

a jtag programmer
Pace and Sammy POGO cables
and a fun card programmer

also does any one have a link to a tut so i can read up on it thanks

Your prob better having another programmer,one that can do virgin cards with,a unlooper as well always comes in handy

your jtag will do samsung 2100 & pace 4000,4010
you need some funcards if you aint got any already.

there is link on this page mate to the download section where there is lots of tuts. Also do a search on google for "tcb.cc toolbar", some good info on there

good luck pal

[palony]

hi thanks for that i did look in the download section but said i had to find private f something any way i got it now and lots of info thanks
i will be doing the samsung boxes as thats what stock i have i would prefer to just programme the virgin media cards didnt know it was possible

do i need a different programmer
i have a max232 for modems i just need to know what hard ware i need to do samsung boxes and virgin media cards if its possible

thanks for any help

[palony]

also do maplins sell fun card 4 programmers

[Roco]

a programmer i use is usb-phoenix-infinity programmer,it will do nearly all cards,there are others. If you want to do a virgin card it will need unlocked first,you unlock it using a unlooper,once unlocked you can get your bk from it(No need for jtag or leadsim ect) & then write to it. The card must be paired to the box.


You can get programmers & cards form Lincsat's Nick-nacks (Shop)
you can get a unlooper from _http://www.fleetcomputersystems.co.uk/

[palony]

thanks roco ill get one of them now is a unlooper software or hard ware

[palony]

there is 2 infinity ones which is best

[palony]

also i know im a pain here but which one of these is best
tiny unlooper
Wizard Unlooper

[Roco]

Originally Posted by palony

thanks roco ill get one of them now is a unlooper software or hard ware

Hardware,they cost about £40.

Originally Posted by palony

there is 2 infinity ones which is best

iv only used the infinity-phoenix one. To read/write virgin cards with the infinity-phoenix one you will need to connect is to your pc using a usb lead & a serial lead so make sure you have a 9pin serial port on your pc.you can get a adapter but they can be allot of hassle

with the infinity-unlimited you only need a usb lead(I think,anyone?)

Originally Posted by palony

also i know im a pain here but which one of these is best
tiny unlooper
Wizard Unlooper

tiny unlooper does the job for me mate