help with getting cam id

[Brio1]

do all boxs have there own cam id
and how do i get one for a sammy 21ooc
help plz

[aubrey4444]

If you find out pm me

thanks

[Brio1]

will do m8

[pepper]

you can work it out off the original paired card

[andyd76]

Originally Posted by Brio1

do all boxs have there own cam id
and how do i get one for a sammy 21ooc
help plz

If you're making a funcard or atmega just make up a new cam id. i'm assuming you're in a c&w area so it should start with 27.

[ade_dnb]

cam id starts 24 for pure, 27 ex CW, 2C TW

[morashid679]

You can make your own with the windows calc in scientific mode.

To make your own follow this guide,

For TW create a 9 digit number starting with 74 i.e 742738927 = 2c454bef

For CW same as above but a number starting with 65 i.e 652738927 = 26e8016f

For Pure, 612738927 = 2485a76f

Hope this helps.

Some Cw cards start with 63 also, so if you have a card from your area just use that as a template and make up your own numbers just keep the 1st two digits.

[Brio1]

i have cam off paired card and done a fun card will try to set the nit with it now thanx to all for info will let you no if it works
a little help goes a long way

[Brio1]

can a cam start with 19 in pure

[aubrey4444]

Originally Posted by Brio1

do all boxs have there own cam id
and how do i get one for a sammy 21ooc
help plz

you can get the cam id from useing a infinity usb programer and putting it into 98/me mode then click read card and it will give you the cam id

thanks