Mosc card help - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

Welshie · 04-01-09, 06:35 PM

Can someone give me some advice which would be greatly appreciated. I am trying to get my infinity card reader to read a mosc card. I have it set to pheonix mode 3.68. I open Nagra 4.0 and try to read from card. This following message appears, any advice given is greatly appreciated.

Many thanks Welshie

Opening of COM3 was successful
ATR String: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00
Error, unsupported card type
Closing of COM3 was successful

sqwidge · 04-01-09, 06:50 PM

Try setting the Phoenix to 3.58 and download nagra 4.1, if the card is locked you will need an unlooper

Welshie · 04-01-09, 09:11 PM

I downloaded nagra 4.1 and 5 tried them both , still no luck does this mean the card is locked.

Peter271254 · 04-01-09, 09:17 PM

Do u have the bk & ird numbers ,or is that why u r trying to read the card
peter

Tesla · 04-01-09, 09:27 PM

Is the card reader a infinity usb unlimited? are you using it on a laptop? are you running windows vista operating system?

Welshie · 04-01-09, 09:30 PM

Thanks for taking the time to help, i have the bk & ird numbers. What it is i have learned how to do funcards and atmegs and thought i would try to do an N*L card.

I have tried but keep getting the message as posted on first post.I tried to change the com ports and still no luck. I was just wondering if its something i am doing wrong.

Again thanks.

Peter271254 · 04-01-09, 09:33 PM

if yo have the numbers,run the card with mron,and this will wipe the card
peter

Welshie · 04-01-09, 09:33 PM

My machine is the infinity usb pheonix. Yes i am running it on my laptop and using windows xp.

Tesla · 04-01-09, 09:43 PM

I would think it is almost a certainty that it is something to do with your setup, the fun card was probably programmed with the software that came with your programmer. This was written for the 'latest systems' usb etc most of the other software that you might use was written before these systems were available so always seem to work OK on old systems with the old COM1 9 pin serial port but always seem to cause problems on newer machines especially laptops because you have to configure your system to behave to the software like a 'cranky old machine'!

Welshie · 04-01-09, 09:46 PM

I would just like to say thanks to all who replied with advice and help.

04-01-09, 06:35 PM	#1 (permalink)
Welshie Junior Member Join Date: Oct 2008 Posts: 19 Thanks: 10 Thanked 0 Times in 0 Posts	Mosc card help Can someone give me some advice which would be greatly appreciated. I am trying to get my infinity card reader to read a mosc card. I have it set to pheonix mode 3.68. I open Nagra 4.0 and try to read from card. This following message appears, any advice given is greatly appreciated. Many thanks Welshie Opening of COM3 was successful ATR String: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Error, unsupported card type Closing of COM3 was successful

04-01-09, 06:50 PM	#2 (permalink)
sqwidge Thanks to those that help Join Date: Jul 2008 Location: At home Posts: 380 Thanks: 19 Thanked 32 Times in 29 Posts	Re: Mosc card help Try setting the Phoenix to 3.58 and download nagra 4.1, if the card is locked you will need an unlooper __________________ All information supplied is for educational purposes only.

04-01-09, 09:11 PM	#3 (permalink)
Welshie Junior Member Join Date: Oct 2008 Posts: 19 Thanks: 10 Thanked 0 Times in 0 Posts	Re: Mosc card help I downloaded nagra 4.1 and 5 tried them both , still no luck does this mean the card is locked.

04-01-09, 09:17 PM	#4 (permalink)
Peter271254 Senior Member Join Date: Sep 2007 Location: Scotland Posts: 102 Thanks: 1 Thanked 21 Times in 19 Posts	Re: Mosc card help Do u have the bk & ird numbers ,or is that why u r trying to read the card peter

04-01-09, 09:27 PM	#5 (permalink)
Tesla Senior Member Join Date: May 2008 Posts: 337 Thanks: 16 Thanked 126 Times in 69 Posts	Re: Mosc card help Is the card reader a infinity usb unlimited? are you using it on a laptop? are you running windows vista operating system? __________________ Without Prejudice all information is for educational purposes only.

04-01-09, 09:30 PM	#6 (permalink)
Welshie Junior Member Join Date: Oct 2008 Posts: 19 Thanks: 10 Thanked 0 Times in 0 Posts	Re: Mosc card help Thanks for taking the time to help, i have the bk & ird numbers. What it is i have learned how to do funcards and atmegs and thought i would try to do an N*L card. I have tried but keep getting the message as posted on first post.I tried to change the com ports and still no luck. I was just wondering if its something i am doing wrong. Again thanks.

04-01-09, 09:33 PM	#7 (permalink)
Peter271254 Senior Member Join Date: Sep 2007 Location: Scotland Posts: 102 Thanks: 1 Thanked 21 Times in 19 Posts	Re: Mosc card help if yo have the numbers,run the card with mron,and this will wipe the card peter

04-01-09, 09:33 PM	#8 (permalink)
Welshie Junior Member Join Date: Oct 2008 Posts: 19 Thanks: 10 Thanked 0 Times in 0 Posts	Re: Mosc card help My machine is the infinity usb pheonix. Yes i am running it on my laptop and using windows xp.

04-01-09, 09:43 PM	#9 (permalink)
Tesla Senior Member Join Date: May 2008 Posts: 337 Thanks: 16 Thanked 126 Times in 69 Posts	Re: Mosc card help I would think it is almost a certainty that it is something to do with your setup, the fun card was probably programmed with the software that came with your programmer. This was written for the 'latest systems' usb etc most of the other software that you might use was written before these systems were available so always seem to work OK on old systems with the old COM1 9 pin serial port but always seem to cause problems on newer machines especially laptops because you have to configure your system to behave to the software like a 'cranky old machine'! __________________ Without Prejudice all information is for educational purposes only.

04-01-09, 09:46 PM	#10 (permalink)
Welshie Junior Member Join Date: Oct 2008 Posts: 19 Thanks: 10 Thanked 0 Times in 0 Posts	Re: Mosc card help I would just like to say thanks to all who replied with advice and help.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Writing mosc card	adam	Cable TV Chat	5	25-10-08 07:09 PM
Mosc card problems	londongeeza	Cable TV Chat	14	10-10-08 02:23 AM
Mosc card Question	tailorvti	Cable TV Chat	25	12-06-08 08:23 PM
Obtaining IRD / BK From MOSC Card Using Dynamite+	stick_dog	Cable TV Chat	3	20-04-08 09:26 PM