Hello, advice and help needed - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

jamdw · 05-01-09, 02:49 PM

I have viewed this and other forums and now I have registred.

How do you get original ip numbers back on dbox and same with subnet address, changed numbers and did not take note.

Trying to setup dbox as it currently not been used for 3 years, looking for help.
I have got ftp 3.2.1 and rom 7, having probs conecting pc to dbox sportster 2002.
I got nul cable and j45 are they anything else required.

I can view channels 1 to 5 but the scan does not work, not picking up transponders.

Please could I be pointed in the correct direction.

plasterer · 05-01-09, 05:49 PM

Turn off DHCP
Enter ip of your choice
And restart Network
It should stay then
Then alter the Network card in the pc So it is in range
1 above or below is recomended.....................Paul

:cheer s:

jamdw · 06-01-09, 12:30 AM

I managed to flash and it is now , wiped out. I believe I have flashed a dbox x1 chipset, it's a sagem if that helps.

I now need a program to flash dbox.

Could this sagem dbox be fixed.

humforce · 06-01-09, 10:58 AM

Quote:

Originally Posted by jamdw

I managed to flash and it is now , wiped out. I believe I have flashed a dbox x1 chipset, it's a sagem if that helps.

I now need a program to flash dbox.

Could this sagem dbox be fixed.

the prog is called IFA {image flash assistant}

jamdw · 06-01-09, 03:19 PM

I need more advice, noobnoob here.

The box as it stands is inactive, please advise on what prog I should update with. I used lak## something, this is no good so what should I have used as the sagem is x1 or x2 chip set.

humforce · 06-01-09, 04:15 PM

Quote:

Originally Posted by jamdw

I need more advice, noobnoob here.

The box as it stands is inactive, please advise on what prog I should update with. I used lak## something, this is no good so what should I have used as the sagem is x1 or x2 chip set.

as above search forum for IFA.

laky is fine aslong as you get correct one

jamdw · 08-01-09, 02:01 PM

The dbox2 that I was trying to help father inlaw is gubbed, can.t even communicate using fta.. or ftx.

Any advice.

jamdw · 12-01-09, 10:10 PM

Hi all,

Managed to flash commando image, just need to put bin rom 7 into keys, please could someone detail how I do this, idealy I would like to flash an image that has everything like new update of rom 7,help greatly appreciated.

kertonio · 13-01-09, 02:37 PM

Im a newbie and I found the guide to flashing nag7 file in the stickys on the main forum page helpful.

humforce · 13-01-09, 06:12 PM

Quote:

Originally Posted by kertonio

Im a newbie and I found the guide to flashing nag7 file in the stickys on the main forum page helpful.

well done.

its a shame others cant be botherd to read before posting.

lol

05-01-09, 02:49 PM	#1 (permalink)
jamdw Junior Member Join Date: Jan 2009 Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts	Hello, advice and help needed I have viewed this and other forums and now I have registred. How do you get original ip numbers back on dbox and same with subnet address, changed numbers and did not take note. Trying to setup dbox as it currently not been used for 3 years, looking for help. I have got ftp 3.2.1 and rom 7, having probs conecting pc to dbox sportster 2002. I got nul cable and j45 are they anything else required. I can view channels 1 to 5 but the scan does not work, not picking up transponders. Please could I be pointed in the correct direction.

05-01-09, 05:49 PM	#2 (permalink)
plasterer Senior Member Join Date: Jun 2008 Posts: 622 Thanks: 87 Thanked 234 Times in 195 Posts	Re: Hello, advice and help needed Turn off DHCP Enter ip of your choice And restart Network It should stay then Then alter the Network card in the pc So it is in range 1 above or below is recomended.....................Paul:cheer s:

06-01-09, 12:30 AM	#3 (permalink)
jamdw Junior Member Join Date: Jan 2009 Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Hello, advice and help needed I managed to flash and it is now , wiped out. I believe I have flashed a dbox x1 chipset, it's a sagem if that helps. I now need a program to flash dbox. Could this sagem dbox be fixed.

06-01-09, 03:19 PM	#5 (permalink)
jamdw Junior Member Join Date: Jan 2009 Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Hello, advice and help needed I need more advice, noobnoob here. The box as it stands is inactive, please advise on what prog I should update with. I used lak## something, this is no good so what should I have used as the sagem is x1 or x2 chip set.

08-01-09, 02:01 PM	#7 (permalink)
jamdw Junior Member Join Date: Jan 2009 Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Hello, advice and help needed The dbox2 that I was trying to help father inlaw is gubbed, can.t even communicate using fta.. or ftx. Any advice.

12-01-09, 10:10 PM	#8 (permalink)
jamdw Junior Member Join Date: Jan 2009 Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Hello, advice and help needed Hi all, Managed to flash commando image, just need to put bin rom 7 into keys, please could someone detail how I do this, idealy I would like to flash an image that has everything like new update of rom 7,help greatly appreciated.

13-01-09, 02:37 PM	#9 (permalink)
kertonio Junior Member Join Date: Dec 2008 Posts: 5 Thanks: 4 Thanked 0 Times in 0 Posts	Re: Hello, advice and help needed Im a newbie and I found the guide to flashing nag7 file in the stickys on the main forum page helpful. Last edited by kertonio; 13-01-09 at 02:40 PM.