motor problems! - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

bamjames · 06-01-09, 04:36 PM

Iv my brackets up and the motor on the brackets and dish on the motor

My technomate cant drive it past 15E(im using EDG nemesis 4.4) and my silvercrest cant drive it at all!

any Ideas why my technomate cant drive it past 15E,its a new motor so there should not be any limits on it!

any ideas

its a technomate 2200 motor BTW

bamjames · 06-01-09, 04:40 PM

Iv just found out it wont drive past 0 going west

WTF is causing this??

a motor or receiver fault??
Or my stupidity ??

OK im doing a factory reset on the TM9100s to clear all setting I put in!

And start the setup process again

bamjames · 06-01-09, 05:54 PM

OK I got it working

I can currently get 13E/19E and 28E

the setup method listed in the TM 9100s manual did not work at all!

I turned it via the Sat find thing in the setup menu!

Now it works fine!
Its too dark to fine tune things so il just tighted everything up and see how good is my arc

Im getting 84% SNR/AGC on Eurocport on 19E is that good ?
And what are SNR/AGC?

06-01-09, 04:36 PM	#1 (permalink)
bamjames Senior Member Join Date: Sep 2008 Location: Co.Kerry , Ireland Posts: 362 Thanks: 35 Thanked 26 Times in 24 Posts	motor problems! Iv my brackets up and the motor on the brackets and dish on the motor My technomate cant drive it past 15E(im using EDG nemesis 4.4) and my silvercrest cant drive it at all! any Ideas why my technomate cant drive it past 15E,its a new motor so there should not be any limits on it! any ideas its a technomate 2200 motor BTW __________________ Technomate 9100 Super and a 80cm Lidl dish on Technomate 2200 getting 42E to 58W

06-01-09, 04:40 PM	#2 (permalink)
bamjames Senior Member Join Date: Sep 2008 Location: Co.Kerry , Ireland Posts: 362 Thanks: 35 Thanked 26 Times in 24 Posts	Re: motor problems! Iv just found out it wont drive past 0 going west WTF is causing this?? a motor or receiver fault?? Or my stupidity ?? OK im doing a factory reset on the TM9100s to clear all setting I put in! And start the setup process again __________________ Technomate 9100 Super and a 80cm Lidl dish on Technomate 2200 getting 42E to 58W Last edited by bamjames; 06-01-09 at 04:43 PM.

06-01-09, 05:54 PM	#3 (permalink)
bamjames Senior Member Join Date: Sep 2008 Location: Co.Kerry , Ireland Posts: 362 Thanks: 35 Thanked 26 Times in 24 Posts	Re: motor problems! OK I got it working I can currently get 13E/19E and 28E the setup method listed in the TM 9100s manual did not work at all! I turned it via the Sat find thing in the setup menu! Now it works fine! Its too dark to fine tune things so il just tighted everything up and see how good is my arc Im getting 84% SNR/AGC on Eurocport on 19E is that good ? And what are SNR/AGC? __________________ Technomate 9100 Super and a 80cm Lidl dish on Technomate 2200 getting 42E to 58W