help please unlooping card - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

palony · 08-01-09, 10:56 PM

hi i have a powersync unlooper and sidewinder software it says its unlocked the card
but in nagra edit i get this
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM Revision: 011
EEPROM Revision: RevB0D
ProviderID: 54
CamID: 24 98 4F 3D
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
Reading ROM11 failed
Closing of COM1 was successful

which means its lock dont it
can any one please help me out i have read loads and im sure im doing it all right

yusuf_gaz · 09-01-09, 12:32 AM

Hi

Still looks locked to me. Use the mikedata bod script should pop in a few minutes.

Regards

palony · 09-01-09, 12:39 AM

is that in the download section? n thanks

blakey_8 · 09-01-09, 12:52 AM

Yes it is, look under MOSC. If the Mikedata Script fails (very unlikely), run Sidewinder instead.

palony · 09-01-09, 12:55 AM

can any one help no matter what scipt i run in win explorer i get this at same point
Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script
Script Error on Line 154
Sc.GetByte: Requested Byte Exceeds Last Read Request

i ran vcc analyser
i got VCC Ceiling: 14
VCC Floor..: 0E

but in side winder it says its done but i still get the above in nagra edit

any ideas

please i been at this for days lol head fried

palony · 09-01-09, 12:57 AM

hi mate ran that and it says its done
do you know the jumper settings i need for power sync
i had it on 2 and 6 and it said it worked but i got the above then i read on anoth site just set it to 1 i did that said it worked but still the same i have tried it on 3 vm cards

palony · 09-01-09, 12:59 AM

do i need a mikedata script for a powersync or does it work under all as in programee parrameters it says t911 and mine aint in list??

yusuf_gaz · 09-01-09, 01:18 AM

Hi

I dont know about that as I use the wizard so dont know what your dip switches should be. You might need to download and install scripts 10en to stop some of those script errors.

Regards

yusuf_gaz · 09-01-09, 01:21 AM

Hi

I the mikedata bod script in program parameters select my looper.

Regards

palony · 09-01-09, 01:22 AM

its not in the list ill double check and let you know again thanks for taking time to help me out

08-01-09, 10:56 PM	#1 (permalink)
palony Member Join Date: Dec 2008 Posts: 79 Thanks: 16 Thanked 1 Time in 1 Post	help please unlooping card hi i have a powersync unlooper and sidewinder software it says its unlocked the card but in nagra edit i get this Opening of COM1 was successful ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 30 31 31 20 52 65 76 42 30 44 3C ROM Revision: 011 EEPROM Revision: RevB0D ProviderID: 54 CamID: 24 98 4F 3D Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74 Attempting to login to BD3 Reading ROM11 failed Closing of COM1 was successful which means its lock dont it can any one please help me out i have read loads and im sure im doing it all right

09-01-09, 12:32 AM	#2 (permalink)
yusuf_gaz Senior Member Join Date: Sep 2008 Posts: 1,964 Thanks: 116 Thanked 623 Times in 525 Posts	Re: help please unlooping card Hi Still looks locked to me. Use the mikedata bod script should pop in a few minutes. Regards

09-01-09, 12:39 AM	#3 (permalink)
palony Member Join Date: Dec 2008 Posts: 79 Thanks: 16 Thanked 1 Time in 1 Post	Re: help please unlooping card is that in the download section? n thanks

09-01-09, 12:52 AM	#4 (permalink)
blakey_8 Senior Member Join Date: Apr 2008 Location: Colne, Lancashire Posts: 6,947 Thanks: 245 Thanked 1,312 Times in 1,205 Posts	Re: help please unlooping card Yes it is, look under MOSC. If the Mikedata Script fails (very unlikely), run Sidewinder instead.

09-01-09, 12:55 AM	#5 (permalink)
palony Member Join Date: Dec 2008 Posts: 79 Thanks: 16 Thanked 1 Time in 1 Post	Re: help please unlooping card can any one help no matter what scipt i run in win explorer i get this at same point Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script Script Error on Line 154 Sc.GetByte: Requested Byte Exceeds Last Read Request i ran vcc analyser i got VCC Ceiling: 14 VCC Floor..: 0E but in side winder it says its done but i still get the above in nagra edit any ideas please i been at this for days lol head fried

09-01-09, 12:57 AM	#6 (permalink)
palony Member Join Date: Dec 2008 Posts: 79 Thanks: 16 Thanked 1 Time in 1 Post	Re: help please unlooping card hi mate ran that and it says its done do you know the jumper settings i need for power sync i had it on 2 and 6 and it said it worked but i got the above then i read on anoth site just set it to 1 i did that said it worked but still the same i have tried it on 3 vm cards

09-01-09, 12:59 AM	#7 (permalink)
palony Member Join Date: Dec 2008 Posts: 79 Thanks: 16 Thanked 1 Time in 1 Post	Re: help please unlooping card do i need a mikedata script for a powersync or does it work under all as in programee parrameters it says t911 and mine aint in list??

09-01-09, 01:18 AM	#8 (permalink)
yusuf_gaz Senior Member Join Date: Sep 2008 Posts: 1,964 Thanks: 116 Thanked 623 Times in 525 Posts	Re: help please unlooping card Hi I dont know about that as I use the wizard so dont know what your dip switches should be. You might need to download and install scripts 10en to stop some of those script errors. Regards

09-01-09, 01:21 AM	#9 (permalink)
yusuf_gaz Senior Member Join Date: Sep 2008 Posts: 1,964 Thanks: 116 Thanked 623 Times in 525 Posts	Re: help please unlooping card Hi I the mikedata bod script in program parameters select my looper. Regards

09-01-09, 01:22 AM	#10 (permalink)
palony Member Join Date: Dec 2008 Posts: 79 Thanks: 16 Thanked 1 Time in 1 Post	Re: help please unlooping card its not in the list ill double check and let you know again thanks for taking time to help me out

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mosc Card unlooping Help Required	Hamed 021	Other Cable Boxes	1	11-12-08 02:52 AM
2110 Card Marked	yusuf_gaz	Cable TV Chat	9	26-09-08 09:26 PM
NTL Card Question	arrows	Cable TV Chat	17	02-07-08 09:19 PM