box in shutdown after powercut - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

cicsware · 11-01-09, 04:33 PM

Hi i`m a new menber as of today with a question on how to recover my eurovox from a shutdown situation, we had a powercut during the night and unfortunatly the box was still switched on when the power returned,point being the box is now in shutdown mode (red light and time displayed when in standby) and (2563 displayed and no green light) when turned on, the box does not respond to the remote and nothing is visable on the tv,I`m guessing the data needs to be cleared and the software reinstalled, problem being how to do this if the box wont respond to the remote. PS the box is EV max blue non clone.

hammy545 · 11-01-09, 06:15 PM

mate i would suggest try reflashing it, if that doesnt work then i think u mite need to do a jtag.......

smoggy · 11-01-09, 06:37 PM

there have been a few threads with weird numbers being displayed and the problem seems to be loss of the scart input
check here eurovox max blue crashed display says 2074

gji25 · 13-01-09, 03:31 PM

you need to flash your blue box with the clonesafe firmware

Zemme · 13-01-09, 05:45 PM

Quote:

Originally Posted by cicsware

Hi i`m a new menber as of today with a question on how to recover my eurovox from a shutdown situation, we had a powercut during the night and unfortunatly the box was still switched on when the power returned,point being the box is now in shutdown mode (red light and time displayed when in standby) and (2563 displayed and no green light) when turned on, the box does not respond to the remote and nothing is visable on the tv,I`m guessing the data needs to be cleared and the software reinstalled, problem being how to do this if the box wont respond to the remote. PS the box is EV max blue non clone.

Hi, when did you buy this receiver? The genuine Eurovox Max Blue was discontinued in February 2007.

The error code suggests that you may have a clone. Disconnect the power cable from the receiver & take off the chassis lid by unscrewing the +screws. Then take a look at the mainboard & power supplies. If you have red colour glue where the screws are, then it will be a clone.

Regards

bkuser · 13-01-09, 05:52 PM

If your euro blue locks up try this
read this it will help you

HONCHO · 13-01-09, 07:12 PM

jtag jtag jtag do that and all will be ok use the other fixes at yer own risk as these are just temp fixes and will eventually fall over again if you jtga it it wil b more stable and last longer

11-01-09, 04:33 PM	#1 (permalink)
cicsware Junior Member Join Date: Jan 2009 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	box in shutdown after powercut Hi i`m a new menber as of today with a question on how to recover my eurovox from a shutdown situation, we had a powercut during the night and unfortunatly the box was still switched on when the power returned,point being the box is now in shutdown mode (red light and time displayed when in standby) and (2563 displayed and no green light) when turned on, the box does not respond to the remote and nothing is visable on the tv,I`m guessing the data needs to be cleared and the software reinstalled, problem being how to do this if the box wont respond to the remote. PS the box is EV max blue non clone.

11-01-09, 06:15 PM	#2 (permalink)
hammy545 The Cable Don Join Date: May 2008 Location: In a Semi-Detached house.. Posts: 128 Thanks: 2 Thanked 11 Times in 11 Posts	Re: box in shutdown after powercut mate i would suggest try reflashing it, if that doesnt work then i think u mite need to do a jtag....... __________________ ALL INFORMATION IS SUPPLIED ONLY FOR EDUCATIONAL PURPOSES.I DO NOT CONDONE THE VIEWING OF ILLEGAL CABLE TELEVISION.

11-01-09, 06:37 PM	#3 (permalink)
smoggy Senior Member Join Date: Apr 2008 Location: North East England Posts: 2,780 Thanks: 240 Thanked 882 Times in 792 Posts	Re: box in shutdown after powercut there have been a few threads with weird numbers being displayed and the problem seems to be loss of the scart input check here eurovox max blue crashed display says 2074

13-01-09, 03:31 PM	#4 (permalink)
gji25 Senior Member Join Date: Feb 2007 Location: hampshire Posts: 766 Thanks: 9 Thanked 114 Times in 95 Posts	Re: box in shutdown after powercut you need to flash your blue box with the clonesafe firmware

13-01-09, 05:52 PM	#6 (permalink)
bkuser Senior Member Join Date: Oct 2008 Posts: 284 Thanks: 16 Thanked 69 Times in 59 Posts	Re: box in shutdown after powercut If your euro blue locks up try this read this it will help you

13-01-09, 07:12 PM	#7 (permalink)
HONCHO Senior Member Join Date: Jun 2008 Location: H.M.P SAUGHTON Posts: 1,023 Thanks: 252 Thanked 189 Times in 164 Posts	Re: box in shutdown after powercut jtag jtag jtag do that and all will be ok use the other fixes at yer own risk as these are just temp fixes and will eventually fall over again if you jtga it it wil b more stable and last longer

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Keep Virmin box online!!	stuckwithsky	Eurovox	10	19-03-10 06:04 PM
Ronsters Guide To Flashing Box For Newbies	ronster	Eurovox	712	10-02-10 02:19 PM
How To Differentiate A Genuine & Clone Eurovox EX5000 PVR's	Zemme	Eurovox	79	20-11-09 08:38 AM
Box Not Detected!	dagsky	Kryptview	7	07-12-08 11:21 AM
please help me blue box problems	mike281180	Eurovox	6	05-12-08 06:19 PM