more unlooper problems - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

Danielle · 14-01-09, 10:42 AM

Strange one guys come to do a rom 11 today but when i run either vcc v3 or v4 one starts at Vcc25 (v3) the other vcc20 (v4) why? don't I need to be somewhere closer to 26-27? tried to turn the pot all the way clockwise but no click :S tiny unlooper by the way. Just cant figure it out

bramleyandy · 14-01-09, 11:25 AM

just adjust the pot very slightly it does make a diffrence 26 27 is about rite but it will pop the card if it higher or lower it mite not do the ird write back

Danielle · 14-01-09, 11:28 AM

yeah but point being is vccV4 starts at 20 V3 starts at 25 cant get it to start any higher, with me?

mikeey · 14-01-09, 12:34 PM

Danielle sometimes i do my card with sidewinder that sets the vcc i think,but i agree with bram in what he says.

.

anyway all the best to u.

mikeey

mikeey · 14-01-09, 12:56 PM

sorry Danielle i ment to say the port not the vcc.

mikeey

bramleyandy · 14-01-09, 02:02 PM

the settings you get in vcc are fine to run the script go for it m8 you wont do any damage

ryanrandom · 14-01-09, 02:08 PM

If you look in the script when its open in winex at the top theres a min and max which it searches. I changed them to max 30 and min 20 and got it set right.

14-01-09, 10:42 AM	#1 (permalink)
Danielle Senior Member Join Date: Nov 2008 Posts: 2,016 Thanks: 137 Thanked 466 Times in 379 Posts	more unlooper problems Strange one guys come to do a rom 11 today but when i run either vcc v3 or v4 one starts at Vcc25 (v3) the other vcc20 (v4) why? don't I need to be somewhere closer to 26-27? tried to turn the pot all the way clockwise but no click :S tiny unlooper by the way. Just cant figure it out

14-01-09, 11:25 AM	#2 (permalink)
bramleyandy Senior Member Join Date: Jan 2008 Location: leeds Posts: 392 Thanks: 43 Thanked 64 Times in 62 Posts	Re: more unlooper problems just adjust the pot very slightly it does make a diffrence 26 27 is about rite but it will pop the card if it higher or lower it mite not do the ird write back

14-01-09, 11:28 AM	#3 (permalink)
Danielle Senior Member Join Date: Nov 2008 Posts: 2,016 Thanks: 137 Thanked 466 Times in 379 Posts	Re: more unlooper problems yeah but point being is vccV4 starts at 20 V3 starts at 25 cant get it to start any higher, with me?

14-01-09, 12:34 PM	#4 (permalink)
mikeey Member Join Date: May 2008 Posts: 39 Thanks: 0 Thanked 5 Times in 5 Posts	Re: more unlooper problems Danielle sometimes i do my card with sidewinder that sets the vcc i think,but i agree with bram in what he says. . anyway all the best to u. mikeey

14-01-09, 12:56 PM	#5 (permalink)
mikeey Member Join Date: May 2008 Posts: 39 Thanks: 0 Thanked 5 Times in 5 Posts	Re: more unlooper problems sorry Danielle i ment to say the port not the vcc. mikeey

14-01-09, 02:02 PM	#6 (permalink)
bramleyandy Senior Member Join Date: Jan 2008 Location: leeds Posts: 392 Thanks: 43 Thanked 64 Times in 62 Posts	Re: more unlooper problems the settings you get in vcc are fine to run the script go for it m8 you wont do any damage

14-01-09, 02:08 PM	#7 (permalink)
ryanrandom Senior Member Join Date: Apr 2008 Posts: 191 Thanks: 27 Thanked 271 Times in 34 Posts	Re: more unlooper problems If you look in the script when its open in winex at the top theres a min and max which it searches. I changed them to max 30 and min 20 and got it set right. __________________ "If Chuck Norris was a plug, he'd be the sturdy, kick-arse British plug. " http://tinyurl.com/ykbkzqm

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
unlooper ? for rom 11	alder191	Cable TV Chat	64	21-10-09 01:21 PM
Witch Unlooper To Buy !	geforcefx	Cable TV Chat	12	28-12-08 01:56 PM
unlooper	ssharish	Other Cable Boxes	1	19-07-08 05:55 PM
Connection Problems	Realist	Broadband	1	01-04-08 04:32 PM
problems with my cyclone unlooper HELP!	matthew4321	Cable TV Chat	3	20-01-08 04:59 PM