NOOB getting flustered - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

tohiba · 15-01-09, 06:52 PM

help,

am getting annoyed 'n that now.

total noob so please bare with me.

have an sb5100 with haxorware on it.
spoofed my spare nic for the sb5100.
traded macs.
connect my sb5100 to power, spare nic and b'band coax.
open up 250 config tool, telnet checked and press connect.

keep getting 'unable to connect to 192...........

would welcome any help / advice please.

cheers

ste0ey · 15-01-09, 07:10 PM

try connecting through your web browser 192.168.100.1

tohiba · 15-01-09, 07:25 PM

thanks ste0ey,

only getting a flashing receive status light when modded modem connected.

have looked at mctazz's excel file tutorial for this 250 config tool but still no joy.

have to keep swapping coax between modems hence delay in getting back.

zulues · 15-01-09, 07:35 PM

it need to be flashed again m8 all lights should be on, thats what just 1 light means.

Bad_Ad84 · 15-01-09, 07:36 PM

you dont have a 250, or the infinite firmware.

so why are you using the 250 config tool?

also, haxorware doesnt run on the 5100.

get correct details and start again so you can be helped.

and dont listen to the person above, hes wrong.

tohiba · 15-01-09, 07:40 PM

sorry, got modded 5101e.

was looking at front of wrong modem.

running vista and clicked on diagnose connection on new nic.

it stated i don't have an ip.

should i click to get one?

apologies for earlier error.

Bad_Ad84 · 15-01-09, 07:48 PM

Right, first steps.

Connect only power and ethernet (dont connect to coax/virgin)

set pc ip address to 192.168.100.10 and subnet of 255.255.255.0

then try and goto http://192.168.100.1 in your browser.

tell me results from that and what leds are solid and which are blinking.

tohiba · 15-01-09, 08:00 PM

ok,

got connected to haxorware page

had flashing receive light

top right of page was scanning through mhz

Bad_Ad84 · 15-01-09, 08:05 PM

goto restore factory settings and reboot.

then go back into haxorware page when modem has rebooted, then goto freq page.

select "both" in top box, "europe" in second.

then enter the following based on what area you are in...

Telwest:
331000000
339000000

NTL Pure:
402750000

EX C&W:
586750000

connect coax then save then reboot, all lights should come on and online should be blinking after a few seconds.

tohiba · 15-01-09, 08:05 PM

here's what i got

15-01-09, 06:52 PM	#1 (permalink)
tohiba Member Join Date: Oct 2008 Location: mingling in the crowd Posts: 35 Thanks: 15 Thanked 3 Times in 3 Posts	NOOB getting flustered help, am getting annoyed 'n that now. total noob so please bare with me. have an sb5100 with haxorware on it. spoofed my spare nic for the sb5100. traded macs. connect my sb5100 to power, spare nic and b'band coax. open up 250 config tool, telnet checked and press connect. keep getting 'unable to connect to 192........... would welcome any help / advice please. cheers

15-01-09, 07:10 PM	#2 (permalink)
ste0ey Senior Member Join Date: Nov 2008 Posts: 141 Thanks: 12 Thanked 29 Times in 27 Posts	Re: NOOB getting flustered try connecting through your web browser 192.168.100.1

15-01-09, 07:25 PM	#3 (permalink)
tohiba Member Join Date: Oct 2008 Location: mingling in the crowd Posts: 35 Thanks: 15 Thanked 3 Times in 3 Posts	Re: NOOB getting flustered thanks ste0ey, only getting a flashing receive status light when modded modem connected. have looked at mctazz's excel file tutorial for this 250 config tool but still no joy. have to keep swapping coax between modems hence delay in getting back.

15-01-09, 07:35 PM	#4 (permalink)
zulues Junior Member Join Date: Jun 2008 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	Re: NOOB getting flustered it need to be flashed again m8 all lights should be on, thats what just 1 light means.

15-01-09, 07:36 PM	#5 (permalink)
Bad_Ad84 Technology Forums Join Date: Dec 2008 Location: sbhacker.net Posts: 974 Thanks: 2 Thanked 251 Times in 173 Posts	Re: NOOB getting flustered you dont have a 250, or the infinite firmware. so why are you using the 250 config tool? also, haxorware doesnt run on the 5100. get correct details and start again so you can be helped. and dont listen to the person above, hes wrong.

15-01-09, 07:40 PM	#6 (permalink)
tohiba Member Join Date: Oct 2008 Location: mingling in the crowd Posts: 35 Thanks: 15 Thanked 3 Times in 3 Posts	Re: NOOB getting flustered sorry, got modded 5101e. was looking at front of wrong modem. running vista and clicked on diagnose connection on new nic. it stated i don't have an ip. should i click to get one? apologies for earlier error.

15-01-09, 07:48 PM	#7 (permalink)
Bad_Ad84 Technology Forums Join Date: Dec 2008 Location: sbhacker.net Posts: 974 Thanks: 2 Thanked 251 Times in 173 Posts	Re: NOOB getting flustered Right, first steps. Connect only power and ethernet (dont connect to coax/virgin) set pc ip address to 192.168.100.10 and subnet of 255.255.255.0 then try and goto http://192.168.100.1 in your browser. tell me results from that and what leds are solid and which are blinking.

15-01-09, 08:00 PM	#8 (permalink)
tohiba Member Join Date: Oct 2008 Location: mingling in the crowd Posts: 35 Thanks: 15 Thanked 3 Times in 3 Posts	Re: NOOB getting flustered ok, got connected to haxorware page had flashing receive light top right of page was scanning through mhz

15-01-09, 08:05 PM	#9 (permalink)
Bad_Ad84 Technology Forums Join Date: Dec 2008 Location: sbhacker.net Posts: 974 Thanks: 2 Thanked 251 Times in 173 Posts	Re: NOOB getting flustered goto restore factory settings and reboot. then go back into haxorware page when modem has rebooted, then goto freq page. select "both" in top box, "europe" in second. then enter the following based on what area you are in... Telwest: 331000000 339000000 NTL Pure: 402750000 EX C&W: 586750000 connect coax then save then reboot, all lights should come on and online should be blinking after a few seconds. Last edited by Bad_Ad84; 15-01-09 at 08:08 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Noob mistake!!! What should I do??	v+newbie	Cable TV Chat	12	20-09-08 09:02 PM
*I'm a noob about 2 purchase Eurovox help needed*	jason_123	Eurovox	6	09-07-08 10:50 PM
Oh No Another Noob	thewash	Introduce yourself	1	17-06-08 02:12 PM
total Noob	PhantomICEMAN	Cable Modems	1	08-06-08 10:55 AM
Noob	MJG	General Video Games	0	26-02-06 10:00 PM