sammy 2110 with original card

[bozobro0]

I have a sammy 2110 with its original card.Am i right in saying that i only have to reprogramme the card and it should work or do i have to blank the chip on the board.Also would i have to use a unlooper.Thanks

[G77]

1, do not put the box onstream under any circumstances other than having a filter on and having had removed the card.
2, you need to unloop the card.
3, if once you have unlooped the card, your bk is not fake, you can move onto 4.
4, if the box is from your area, and you know the pin, you need mod it no further
5, if the box is from outside your area, and/or you do not know then pin, you need to do a master reset and netid funcard trick.

[bozobro0]

Thanks for the advice

[geforcefx]

Originally Posted by G77

1, do not put the box onstream under any circumstances other than having a filter on and having had removed the card.
2, you need to unloop the card.
3, if once you have unlooped the card, your bk is not fake, you can move onto 4.
4, iu need modf the box is from your area, and you know the pin, yo it no further
5, if the box is from outside your area, and/or you do not know then pin, you need to do a master reset and netid funcard trick.

about ques 4, the box is from my erea ..can i just look on eng to see what the pin is ? then> do i have to change the pin or can i leave it as it is ?

[G77]

you get three goes in the osm settings. i would go for 1234, then 1111 and if you dont get it, you need to do a master reset.

the pin will appear as **** in eng menu. if it appears as 0000 it has not been set and you can set it from here

[geforcefx]

thanks G77 ur the MAN !