Samsung Netid

[pzblues]

Hi
I've been trying to set netid on a sammy 2100 in ex c&w area with a funcard but when i boot up to ld14, em appears then when i enter the card the display stays at 5nd and does'nt update the netid. Any ideas where i may be going wrong, i've done others before using the same method without any problems!
All help appreciated..

Thanks

[G77]

short out the battery with a bit of wire first

[pzblues]

Originally Posted by G77

short out the battery with a bit of wire first

Thanks, yea i've done all that, its ready for the update, just wont happen...

[rawsy]

so the net id is showing 09999??? if it is and you are sure that you making the card right maybe the bk is wrong. if the net id isnt showing 09999 tryand reboot the box and press standby ok left and right and hold until the display shows ld:06 or ld:05 i cant remember which.

[tariqz118]

mate if you are in EX CW area the net id DOES NOT set itself by rebooting it. only in pure ntl it sets auto. for you to set net id in EX CW area you will need to use a netidfuncard with your BK & IRD if not you can set net id with jtag using ocd

[rawsy]

Originally Posted by tariqz118

mate if you are in EX CW area the net id DOES NOT set itself by rebooting it. only in pure ntl it sets auto. for you to set net id in EX CW area you will need to use a netidfuncard with your BK & IRD if not you can set net id with jtag using ocd

that is exactly what he is doing. he said that in the first line of his post lol

[rawsy]

allso i have noticed before ( not often ) that when the cable feed is connected the box has rebooted it didnt used to be like that though. worth a try

[geforcefx]

Originally Posted by tariqz118

mate if you are in EX CW area the net id DOES NOT set itself by rebooting it. only in pure ntl it sets auto. for you to set net id in EX CW area you will need to use a netidfuncard with your BK & IRD if not you can set net id with jtag using ocd

m8 im in pure .. . i know i DONT have to set the net id , as it does it auto ...but what about the pin ? ...... do i still need to use netidfuncard with bk & ird to set that ......im abit stuck !(on wich order to do things in) plus i know i have to update it . thanks

[rawsy]

if your in pure reset the box and re enter the pin in the em

[geforcefx]

Originally Posted by rawsy

if your in pure reset the box and re enter the pin in the em

rawsy this is my first go @ 1 of these .......... " what do u mean m8 by reseting the box first" & do i need to have the feed in while im doing it ...ty sorry 4 asking alot ....dont wonna fooook it up ...cheers