TW Rom11 B09

[nomic]

i used sidewinder with a rom11 bo9 i got the bk and ird with the get bk then also did the unlocked the card again with the 1.2 as it wouldnt read the card after it gave me the bk and ird it is saying no atr the atr is ff so i have the card the ird and the bk but bad atr on card i tried repair the card with the atr repair program but it is dead can i recover the card for writing or do i have to funcard it ????

[dannyt0812]

Try using mrom to repair your card that should hopefully do the trick works quite well for me.

[BL4K3Y]

You have a very slim chance of recovering a No ATR card because the chip itself is fried. As long as you have the BK and IRD you are fine, just program another card and all will be good .

[nomic]

i think it was my programmer its a cas 3 i tried to read 5 different card all did the same thing i have sent it back for a replacement it should arrive tomorow ill let u know what happens thanks for ur help guys

[Neosophist]

Sounds like you fried the chips unlooping them.

ATM on eBay there are LOTS of unlocked Rom11 Origianl Smart Cards with Good ATR's, i think one blokes selling them £6 each, just a tad over a funcard.

[nomic]

ok i got a new cas 3 it still wont read the cards in the cas 3 card programmer but i did the pheonix 3.68 and used nagra it read the card i used an image it wrote to the card what the hell is going on with the thing ??? anyone got any ideas but only a couple of the cards work that way am i missing some essencial files or something ???

[nomic]

when i say i used the pheonix 3.68 i mean the cas 3 pheonix 3.68 emulator so its the same programmer just different software

[reddiesel]

Originally Posted by nomic

when i say i used the pheonix 3.68 i mean the cas 3 pheonix 3.68 emulator so its the same programmer just different software

You use nagra edit in 3.68 to do mosc cards, you cant use any of the cas studio software, only with tit or opus type rom cards.

[reddiesel]

Originally Posted by nomic

i used sidewinder with a rom11 bo9 i got the bk and ird with the get bk then also did the unlocked the card again with the 1.2 as it wouldnt read the card after it gave me the bk and ird it is saying no atr the atr is ff so i have the card the ird and the bk but bad atr on card i tried repair the card with the atr repair program but it is dead can i recover the card for writing or do i have to funcard it ????

B09 cards dont need unlooping its usually the backdoor key locked, if you use boxget pc2 to get bk ,then use A3E/Bo9 dc2 patch, or you can use xncs to find B/D key, running card twice with unlooper probably killed it.
If you click on reset atr a few times, to the left of read with your other cards you might find theyre ok, these cards are very temperamental, you sometimes have to keep trying to read or write over again till you get it to work.