sammy bytes - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

waltzergav · 29-01-09, 08:12 PM

hi every one i have a sammy 2100 an infinity usb phoenix programmer and a pogo jtag for sammy,s but cant seem to get bk all i get is ffffffffffffbfff .from the reading i have done it,s something to do with the wrong bytes i have ocd commander and the sammy debug tool but both keep giving me the ffffff,s any help would be greatly appreceated so many thanks in advance for snyone with some advice

waltzergav · 29-01-09, 08:13 PM

does this mean the ird it,s giving me is wrong aswell ........ again many many thanks

waltzergav · 29-01-09, 08:55 PM

O.K GOT BK AND THE IRD im inputting them to netid.v2 final and saving the hex files for int ext and flash then writing them to a funcard4 with my usb phoenix but the box keeps telling me card not inserted ... i have tried writing the card a few times and still nothing any ideas would be grately appreciated ...
many thanks in advance

Lacutas · 29-01-09, 08:59 PM

first thing is that you can get yuor erd from the engineers menu of the box, you are jtagging for your bk, what area are you in, and I or someone will on here will tell you the byte address for your ird for your area, make sure your box has been online and got the latest update on your box, or your byte address will be wrong. I would use bke2.2, to connect your jtag, there is a greenlight on it to tell you if connected successfully.
also make sure your box is in debug mode, when power on hold till ld14, wait a few seconds then let go. your power light button should go from red to green, but to be truthful, different peeps experience diff things, I have jtagged without the light going green, and some peeps have success if the box is online when going into debug mode, you will have to experiment.

Lacutas · 29-01-09, 09:01 PM

use toxic7 to create your extheep, and the flash for your area in the flash

waltzergav · 29-01-09, 09:30 PM

lol just used toxic 7 to create my exteep file now the box seems to work like it should apart from the fact alot of the pics are just black screen but i can turn to any channel useing the up and down on the front of the box wich i could,nt before it would only go to basic channels and skip any i didnt have ....... i think i read somewere i need to leave it on a black screen for so long then it should just come up but cant remember if it had to be on a certain channel

waltzergav · 29-01-09, 09:31 PM

im in the northampton area pure ntl

waltzergav · 29-01-09, 09:32 PM

many many thanks to all at techwatch

waltzergav · 29-01-09, 10:23 PM

seemed to have worked but all new channels are just black screen ..... any help please .....
thanks
thanks
thanks

waltzergav · 29-01-09, 11:38 PM

How do i get ird from engineers menu i cant see it anywere

thanks again

29-01-09, 08:12 PM	#1 (permalink)
waltzergav Senior Member Join Date: Jan 2009 Location: midlanz Posts: 208 Thanks: 99 Thanked 10 Times in 9 Posts	sammy bytes hi every one i have a sammy 2100 an infinity usb phoenix programmer and a pogo jtag for sammy,s but cant seem to get bk all i get is ffffffffffffbfff .from the reading i have done it,s something to do with the wrong bytes i have ocd commander and the sammy debug tool but both keep giving me the ffffff,s any help would be greatly appreceated so many thanks in advance for snyone with some advice

29-01-09, 08:13 PM	#2 (permalink)
waltzergav Senior Member Join Date: Jan 2009 Location: midlanz Posts: 208 Thanks: 99 Thanked 10 Times in 9 Posts	Re: sammy bytes does this mean the ird it,s giving me is wrong aswell ........ again many many thanks

29-01-09, 08:55 PM	#3 (permalink)
waltzergav Senior Member Join Date: Jan 2009 Location: midlanz Posts: 208 Thanks: 99 Thanked 10 Times in 9 Posts	Re: sammy bytes O.K GOT BK AND THE IRD im inputting them to netid.v2 final and saving the hex files for int ext and flash then writing them to a funcard4 with my usb phoenix but the box keeps telling me card not inserted ... i have tried writing the card a few times and still nothing any ideas would be grately appreciated ... many thanks in advance

29-01-09, 08:59 PM	#4 (permalink)
Lacutas Senior Member Join Date: Oct 2008 Posts: 392 Thanks: 1 Thanked 95 Times in 82 Posts	Re: sammy bytes first thing is that you can get yuor erd from the engineers menu of the box, you are jtagging for your bk, what area are you in, and I or someone will on here will tell you the byte address for your ird for your area, make sure your box has been online and got the latest update on your box, or your byte address will be wrong. I would use bke2.2, to connect your jtag, there is a greenlight on it to tell you if connected successfully. also make sure your box is in debug mode, when power on hold till ld14, wait a few seconds then let go. your power light button should go from red to green, but to be truthful, different peeps experience diff things, I have jtagged without the light going green, and some peeps have success if the box is online when going into debug mode, you will have to experiment.

29-01-09, 09:01 PM	#5 (permalink)
Lacutas Senior Member Join Date: Oct 2008 Posts: 392 Thanks: 1 Thanked 95 Times in 82 Posts	Re: sammy bytes use toxic7 to create your extheep, and the flash for your area in the flash

29-01-09, 09:30 PM	#6 (permalink)
waltzergav Senior Member Join Date: Jan 2009 Location: midlanz Posts: 208 Thanks: 99 Thanked 10 Times in 9 Posts	Re: sammy bytes lol just used toxic 7 to create my exteep file now the box seems to work like it should apart from the fact alot of the pics are just black screen but i can turn to any channel useing the up and down on the front of the box wich i could,nt before it would only go to basic channels and skip any i didnt have ....... i think i read somewere i need to leave it on a black screen for so long then it should just come up but cant remember if it had to be on a certain channel

29-01-09, 09:31 PM	#7 (permalink)
waltzergav Senior Member Join Date: Jan 2009 Location: midlanz Posts: 208 Thanks: 99 Thanked 10 Times in 9 Posts	Re: sammy bytes im in the northampton area pure ntl

29-01-09, 09:32 PM	#8 (permalink)
waltzergav Senior Member Join Date: Jan 2009 Location: midlanz Posts: 208 Thanks: 99 Thanked 10 Times in 9 Posts	Re: sammy bytes many many thanks to all at techwatch

29-01-09, 10:23 PM	#9 (permalink)
waltzergav Senior Member Join Date: Jan 2009 Location: midlanz Posts: 208 Thanks: 99 Thanked 10 Times in 9 Posts	Re: sammy bytes seemed to have worked but all new channels are just black screen ..... any help please ..... thanks thanks thanks

29-01-09, 11:38 PM	#10 (permalink)
waltzergav Senior Member Join Date: Jan 2009 Location: midlanz Posts: 208 Thanks: 99 Thanked 10 Times in 9 Posts	Re: sammy bytes How do i get ird from engineers menu i cant see it anywere thanks again

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Powersync Unlooper plz help	tariqz118	Cable TV Chat	12	17-10-08 01:01 AM
Bytes	googand	Cable TV Chat	8	26-05-08 08:15 PM
sammy 2100 f**ked !!!!!	mancmw	Cable TV Chat	28	23-05-08 11:28 AM
HELP NEEDED WITH SAMMY 2100c	imybash	Cable TV Chat	4	13-05-08 08:36 PM