Belfast - ITV2 and ITV3 missing - 8% Signal Fix

[Rama78]

Hello Everyone

I just have a black screen for these channels? Does anyone know what the frequencies are so I can update them?

I dont want to use the update channels feature as I had to use the 8% Signal Fix firmware back in December. I also have all my channels and favourites sorted out and Im afraid incase I ruin them all by doing using the channel update feature.

Does anyone know the frequencies? Pretty please

[pete1873]

Both ITV2 and ITV3 are on freq 451.00

[Rama78]

Cheers 4 that mate but how do i go about updating it now?

Where do i go in channel manager etc?

[pete1873]

Here is Smoggy's guide to what you need, thankfully saves me typing it out

To manual scan a frequency

Menu/Installation/User Installation/OK/Pin (brings up the screen showing your frequencies)
scroll to the frequency you want to manual scan
press OK when on that frequency and this will place a tick next to it (you can select more than 1)
press the blue button to scan that frequency (pressing the red button will update all channels)
If all goes well your missing channels will be somewhere in your TV list.

To add a frequency

Menu/Installation/User Installation/OK/Pin
press the green button (CH Edit) and then the red (ADD) this will open a screen to input required information
you now need to input the channel number, this should be 1 above your highest, (if you have 31 transponders then number it 32)
To change the channel number press info on the remote (this brings up an editing screen)
On the editing screen Input the number you want and then select save and press OK on remote
you will now have a screen with your new channel number
using the remote numbers input the new frequency and do the same to input your symbolrate
Press OK to save it and you will go to the frequency screen where your saved frequency will be last in the list
Highlight your new frequency and press OK (this will put a tick next to it)
Press the remotes Blue button to manually scan that frequency.

[Smurf]

Originally Posted by Rama78

Hello Everyone

I just have a black screen for these channels? Does anyone know what the frequencies are so I can update them?

I dont want to use the update channels feature as I had to use the 8% Signal Fix firmware back in December. I also have all my channels and favourites sorted out and Im afraid incase I ruin them all by doing using the channel update feature.

Does anyone know the frequencies? Pretty please

These channels aint 24hours check the EPG or check during the day to see if they are there. Go off at night some time.

[Nick_Y]

The frequencies aren't the same all over te country are they? If they're not anyone know the frequencies for itv2 + itv3 for notts?

[Rama78]

This worked well for me. Cheers Pete

Only problem was that it knocked all my channels and favourites out of order. Nightmare. Have it mostly fixed now anyway.

Is there not an 8% signal fix firmware that has the autosort on/off feature also?

[pete1873]

Save your CDF file next time mate and just edit that

[light]

The freq have changed for ITV2 & ITV3 try 524000 or you may want to do a full rescan.
If you dont have CDF saved and dont mind wasting 20 mins full scan will also bring them back

[thehoops]

Originally Posted by pete1873

Here is Smoggy's guide to what you need, thankfully saves me typing it out

To manual scan a frequency

Menu/Installation/User Installation/OK/Pin (brings up the screen showing your frequencies)
scroll to the frequency you want to manual scan
press OK when on that frequency and this will place a tick next to it (you can select more than 1)
press the blue button to scan that frequency (pressing the red button will update all channels)
If all goes well your missing channels will be somewhere in your TV list.

To add a frequency

Menu/Installation/User Installation/OK/Pin
press the green button (CH Edit) and then the red (ADD) this will open a screen to input required information
you now need to input the channel number, this should be 1 above your highest, (if you have 31 transponders then number it 32)
To change the channel number press info on the remote (this brings up an editing screen)
On the editing screen Input the number you want and then select save and press OK on remote
you will now have a screen with your new channel number
using the remote numbers input the new frequency and do the same to input your symbolrate
Press OK to save it and you will go to the frequency screen where your saved frequency will be last in the list
Highlight your new frequency and press OK (this will put a tick next to it)
Press the remotes Blue button to manually scan that frequency.

cheers