How do put latest haxorware firmware on modem via telnet?? - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

stokie mac · 14-02-09, 12:50 PM

I would like to put the latest haxorware firmware on my modem as at the moment im using 1.0rc3..
Ive heard you can do it via telnet,how easy is it to do & could you tell me what i need to do??
Also what is the latest firmware you would recommend me putting on my modem??
Thanks in advance

Danielle · 14-02-09, 01:02 PM

not sure that's the latest version, anyhow give it a few hours mate bad_ad is writing haxorware guides as we speak and i would presume with latest files

Bad_Ad84 · 14-02-09, 01:04 PM

actually not as we speak, at the moment im swamped with work lol.

soon as ive done that tho, its tutorials.

ive added this to the to-do tutorials in the sticky.

lee-ds · 14-02-09, 06:24 PM

Nice one fella,

mowax · 14-02-09, 07:44 PM

i've done it, followed the instructions that came with it, how ever if bad is gonna write a tut then wait for it......

one word of warnign don't upgrade it when the cable feed is in like i did.... DOH.

lee-ds · 14-02-09, 10:06 PM

Will there be tutorials for serial & telnet etc? (obviously dependent on Firmware)

Also, will they be idiot guides?

lee-ds · 14-02-09, 10:10 PM

Quote:

Originally Posted by mowax

i've done it, followed the instructions that came with it, how ever if bad is gonna write a tut then wait for it......

one word of warnign don't upgrade it when the cable feed is in like i did.... DOH.

I would have thought the modem is most stable when disconnected

mowax · 14-02-09, 11:02 PM

This is the instructions so the tut will prolly have them in, but it kind of is a tut...lololl

you have to make sure telent is enabled in the modem that's where i went wrong...so check it and reboot, then telnet will connect.

oh and make sure your cable feed is out....

Upgrading from previous shelled firmware (infinite) or Haxorware 1.0
Set your computers ip to 192.168.100.10
Set up a TFTP server with haxorware11rev27.bin in its root
Make sure the haxorware webgui isn't currently open
Connect to modem with hyperterminal or telnet to the IP 192.168.100.1
Enter your username and password
cd /ip
ipconfig 1 release
y
dload -i 1 -l -f 192.168.100.10 haxorware11rev27.bin
y
cd /
reset
Haxorware 1.1 should now boot

Bad_Ad84 · 14-02-09, 11:04 PM

you can just do it via serial, serial = same as telnet.

but its all the same.

mowax · 14-02-09, 11:05 PM

what's the safest way bad? or does it not matter? is telnet best?

14-02-09, 12:50 PM	#1 (permalink)
stokie mac Senior Member Join Date: Jul 2008 Location: Stoke-On-Trent.. Posts: 254 Thanks: 197 Thanked 17 Times in 16 Posts	How do put latest haxorware firmware on modem via telnet?? I would like to put the latest haxorware firmware on my modem as at the moment im using 1.0rc3.. Ive heard you can do it via telnet,how easy is it to do & could you tell me what i need to do?? Also what is the latest firmware you would recommend me putting on my modem?? Thanks in advance

14-02-09, 01:02 PM	#2 (permalink)
Danielle Senior Member Join Date: Nov 2008 Posts: 2,016 Thanks: 137 Thanked 466 Times in 379 Posts	Re: How do put latest haxorware firmware on modem via telnet?? not sure that's the latest version, anyhow give it a few hours mate bad_ad is writing haxorware guides as we speak and i would presume with latest files

14-02-09, 01:04 PM	#3 (permalink)
Bad_Ad84 Technology Forums Join Date: Dec 2008 Location: sbhacker.net Posts: 974 Thanks: 2 Thanked 251 Times in 173 Posts	Re: How do put latest haxorware firmware on modem via telnet?? actually not as we speak, at the moment im swamped with work lol. soon as ive done that tho, its tutorials. ive added this to the to-do tutorials in the sticky.

14-02-09, 06:24 PM	#4 (permalink)
lee-ds Cable Animal Join Date: Dec 2008 Location: The Capital Of Yorkshire Posts: 1,673 Thanks: 163 Thanked 451 Times in 350 Posts	Re: How do put latest haxorware firmware on modem via telnet?? Nice one fella, __________________ If at first you don't succeed.......flash and flash again!

14-02-09, 07:44 PM	#5 (permalink)
mowax Senior Member Join Date: Sep 2008 Posts: 550 Thanks: 35 Thanked 61 Times in 54 Posts	Re: How do put latest haxorware firmware on modem via telnet?? i've done it, followed the instructions that came with it, how ever if bad is gonna write a tut then wait for it...... one word of warnign don't upgrade it when the cable feed is in like i did.... DOH.

14-02-09, 10:06 PM	#6 (permalink)
lee-ds Cable Animal Join Date: Dec 2008 Location: The Capital Of Yorkshire Posts: 1,673 Thanks: 163 Thanked 451 Times in 350 Posts	Re: How do put latest haxorware firmware on modem via telnet?? Will there be tutorials for serial & telnet etc? (obviously dependent on Firmware) Also, will they be idiot guides? __________________ If at first you don't succeed.......flash and flash again!

14-02-09, 11:02 PM	#8 (permalink)
mowax Senior Member Join Date: Sep 2008 Posts: 550 Thanks: 35 Thanked 61 Times in 54 Posts	Re: How do put latest haxorware firmware on modem via telnet?? This is the instructions so the tut will prolly have them in, but it kind of is a tut...lololl you have to make sure telent is enabled in the modem that's where i went wrong...so check it and reboot, then telnet will connect. oh and make sure your cable feed is out.... Upgrading from previous shelled firmware (infinite) or Haxorware 1.0 Set your computers ip to 192.168.100.10 Set up a TFTP server with haxorware11rev27.bin in its root Make sure the haxorware webgui isn't currently open Connect to modem with hyperterminal or telnet to the IP 192.168.100.1 Enter your username and password cd /ip ipconfig 1 release y dload -i 1 -l -f 192.168.100.10 haxorware11rev27.bin y cd / reset Haxorware 1.1 should now boot

14-02-09, 11:04 PM	#9 (permalink)
Bad_Ad84 Technology Forums Join Date: Dec 2008 Location: sbhacker.net Posts: 974 Thanks: 2 Thanked 251 Times in 173 Posts	Re: How do put latest haxorware firmware on modem via telnet?? you can just do it via serial, serial = same as telnet. but its all the same.

14-02-09, 11:05 PM	#10 (permalink)
mowax Senior Member Join Date: Sep 2008 Posts: 550 Thanks: 35 Thanked 61 Times in 54 Posts	Re: How do put latest haxorware firmware on modem via telnet?? what's the safest way bad? or does it not matter? is telnet best?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cable Modem gone down in my area.	AciidSn3ak3r	Cable Modems	70	04-02-10 09:46 PM
Latest SL65/12 Ali B1 Firmware	chrisuk1	Comag/SilverCrest	29	14-11-08 02:05 PM
Eurovox Latest Firmware	micky b	Eurovox	6	24-07-07 03:38 PM
flashing firmware without null modem	psxpirate2k2	Eurovox	1	30-08-06 11:09 PM