eurovox max v NO SERVICE

[dynomike]

Hi folks hope u can help this is frustrating me.
I have a max v when loaded with latest and scan performed will find 11 transponders at most.<closest to incomer> It will then show channel but it will start to break up to the point that a NO SERVICE window opens, and the same for all channels.
I have tried FTP and BOX toBOX with channel lists installed with the same results. Cannel will come on but break up within mins.
Hope its simple or is new tuner required.
Thanks in anticipation

[TechWreck]

when you power scanned did you notice if the signal strength was hanging on 8% ? because some maxV`s had tuner problems,but there is a new file for the 8$ fix.
just a thought being as you have just flashed the box

[Tanya]

Originally Posted by dynomike

Hi folks hope u can help this is frustrating me.
I have a max v when loaded with latest and scan performed will find 11 transponders at most.<closest to incomer> It will then show channel but it will start to break up to the point that a NO SERVICE window opens, and the same for all channels.
I have tried FTP and BOX toBOX with channel lists installed with the same results. Cannel will come on but break up within mins.
Hope its simple or is new tuner required.
Thanks in anticipation

If you have flashed with the software with the 8% signal fix and that hasn't worked you might need a signal booster. I used one a few years ago I had a similar problem my box it would start (then after about 10 mins of service) pixalating and there was a very annoying noise also, I don't recall a No Service message but I did have to turn the box off, it was soo annoying! I ended up buying a 3 in 1 signal booster from Argos, it cost about 25 euro's tops and it worked an absolute treat! Hope this is of some help to you. Let's know how you get on..

[pete1873]

Personally I would re-flash your box with the normal software and as TechWreck said check your signal strength, also go direct into the back of your Eurovox, take out any splitters etc in case they are causing the problem.

If you are getting 8% then re-flash with this fixed software.

If you are getting more than that then double check all connections are sound and firmly screwed in. You should get over 30 TP's from memory.