250 problems

[stuuyh]

When i connect my 250 to hyperterminal i get this mesage


BCM3349A0
10000001034689

and thats it...nothing else....before this when i was `trying` to flash it i got to the stage were i entered option D save and flash `250hack_dump_telnet.bin` but when i pressed return it failed and would not comlpete the flash....any ideas??thanks

[mowax]

Sounds like a firewall problem if the file was never sent via tftp

doesn't sound good, maybe bad_ad can help you on this one, we really need to get a new tut up and get people flashing by running haxor from memory, if the flash goes wrong as bad_ad states " it won't ruin the bootloader and brick it"

i've been using option G and then using the GUI on haxor to upload the 1 meg haxor rc6 file to the modem this is the safest way to do it.

you can only use RC6 to do it via the GUI ....so don't use any other version as the other versions had a bug init and that wouldn't work.

have a read of this thread it's about the same thing....

flashing

[stuuyh]

thanks for that...i have another 250 and when i power that up on hyperterminal sh*t loads of text pops up and ends up saying this..

| Copyright (c) 1999 - 2005 Broadcom Corporation |
| |
| Revision: 3.9.32 RELEASE |
| |
| Features: AckCel(tm) DOCSIS 1.0/1.1/2.0 Propane(tm) CM SNMP w/Factory MIB |
| Features: Support CM Vendor Extension |
+----------------------------------------------------------------------------+
| Broadcom Data-Only CM Vendor Extension |
| |
| Copyright (c) 1999 - 2004 Broadcom Corporation |
| |
| Revision: 3.6.2 RELEASE |
| |
| Features: DHCP Server HTTP Server OSS2-N-03025 Visualization LED |
| Features: Controller |
+----------------------------------------------------------------------------+
| Build Date: Jun 29 2007 |
| Build Time: 17:55:00 |
| Built By: alex |
| Firmware version : 2.94.1014 |
| Hidden version : 2.94.1014 |
+----------------------------------------------------------------------------+

Disable console output

and one of the lights is blinking very quick constantly

anyone??

[mowax]

that one that you have there has the "alex" firmware, vermin disabled the P option using that.....


look for console unlocker, then you will need softjtag to load the original bootloader to the ambit, and then you will get the P option back ready for flashing....


also if you hang fire on flashing there looks like there also may be a better way of flashing the new haxor 1.1 onto them....have a read of this thread.....and look for techwrecks comments

more flashing help

[stuuyh]

been looking all over for that console unlocker cant find it anywhere....any links possibly please mate??

[stuuyh]

aahhhh...everything that can go wrong has gone wrong...i got console unlockerv1.1b and when i click execute exploit it says invalid port number and wont le me change it.....im going to scream...my first time doing this and its a nightmare!but i wont give up...but i do need help though!

[lee-ds]

I don't think you are connected to the correct com/port

Have a look in your device manager and see what com/port you are actually using for the modem.

[Bad_Ad84]

im actually writing a new app that includes console unlocker + bootloader writing (like softjtag)

hence the lack of tutorials at the moment, im just really busy with alot of things all at the same time.

[50pounds]

Originally Posted by stuuyh

When i connect my 250 to hyperterminal i get this mesage


BCM3349A0
10000001034689

and thats it...nothing else....before this when i was `trying` to flash it i got to the stage were i entered option D save and flash `250hack_dump_telnet.bin` but when i pressed return it failed and would not comlpete the flash....any ideas??thanks

Ihave this with to of my modems after using console unlocker and softjag to get back into the p option its bricked i think now mate. who knows.. :S

[stuuyh]

Originally Posted by lee-ds

I don't think you are connected to the correct com/port

Have a look in your device manager and see what com/port you are actually using for the modem.

device manager says com port 23...i did change it but still get the same error message