problems with my 255ambit need help

[shreksta]

this is what i get in hyperterminal and i cant do anything with it untill i can get it sorted.
MODEM APPLICATION PARAMETERS:
IP address of the TFTP host is [62.253.189.100]
The file to download and start is ntlhm120_ntl0003.cpr
Detect MXIC MX219LV160B Flash
Running image1 !!!!!
BCM3345 Image
S12ce7865Detect MXIC MX219LV160B Flash
##ECS Magic number was wrong. Working with default value.
Updating parameter storage. This may take a while...
<USB ni init>
Location of Root is 80106154
Running from RAM
Detect MXIC MX219LV160B Flash
This is image1
Detect a filesystem
Boot loader updated....
Perfect modem.
DNS service enable
DHCP Server init (Use Default)
4 Upstream Queues Configured.
Creating USB task
Flushing event log
Issue software reset
Waiting for reset finished
Init EMAC registers
USBD started
SenUSB NDIS Driver
Reading programmed USB Configuration...
dUSB init OK
encryptiInit Mibs
on key requests
Use DHCP
VoIP card interface is NOT enabled.
The tuner is a TEMIC_4907_8768
The upstream amplifier is a MicroTune 1530
Periodic ranging timeouts are enabled
Preamble type will be set by the burst profiles
Use default MCNS symbol rates.
BCM3345
134ce7865
Boot Code SW Version 3.11.3
BCM3345 Ambit
S12ce7865Detect MXIC MX219LV160B Flash
Ambit Cable Modem Console Management
NETWORK INTERFACE PARAMETERS:
IP address on LAN is 192.168.100.1
LAN interface's subnet mask is 255.255.255.0
HARDWARE PARAMETERS:
This board's Ethernet hardware address is 00:02:8A:68:32:5E
This board's USB Interface hardware address is 00:02:8A:68:32:5F
CABLE MODEM APPLICATION PARAMETERS:
IP address of the TFTP host is [62.253.189.100]
The file to download and start is ntlhm120_ntl0003.cpr
Detect MXIC MX219LV160B Flash
Running image1 !!!!!
BCM3345 Image
S12ce7865Detect MXIC MX219LV160B Flash
##ECS Magic number was wrong. Working with default value.
Updating parameter storage. This may take a while...
<USB ni init>
Location of Root is 80106154
Running from RAM
Detect MXIC MX219LV160B Flash
This is image1
Detect a filesystem
Boot loader updated....
Perfect modem.
DNS service enable
DHCP Server init (Use Default)
4 Upstream Queues Configured.
Creating USB task
Flushing event log
Issue software reset
Waiting for reset finished
Init EMAC registers
USBD started
SenUSB NDIS Driver
Reading programmed USB Configuration...
dUSB init OK
encryptiInit Mibs
on key requests
Use DHCP
VoIP card interface is NOT enabled.
The tuner is a TEMIC_4907_8768
The upstream amplifier is a MicroTune 1530
Periodic ranging timeouts are enabled
Preamble type will be set by the burst profiles
Use default MCNS symbol rates.
BCM3345
134ce7865
Boot Code SW Version 3.11.3
BCM3345 Ambit
S12ce7865Detect MXIC MX219LV160B Flash
Ambit Cable Modem Console Management
NETWORK INTERFACE PARAMETERS:
IP address on LAN is 192.168.100.1
LAN interface's subnet mask is 255.255.255.0
HARDWARE PARAMETERS:
This board's Ethernet hardware address is 00:02:8A:68:32:5E
This board's USB Interface hardware address is 00:02:8A:68:32:5F
CABLE MODEM APPLICATION PARAMETERS:
IP address of the TFTP host is [62.253.189.100]
The file to download and start is ntlhm120_ntl0003.cpr
Detect MXIC MX219LV160B Flash
Running image1 !!!!!
BCM3345 Image
S12ce7865Detect MXIC MX219LV160B Flash
##ECS Magic number was wrong. Working with default value.
Updating parameter storage. This may take a while...
<USB ni init>
Location of Root is 80106154
Running from RAM
Detect MXIC MX219LV160B Flash
This is image1
Detect a filesystem
Boot loader updated....
Perfect modem.
DNS service enable
DHCP Server init (Use Default)
4 Upstream Queues Configured.
Creating USB task
Flushing event log
Issue software reset
Waiting for reset finished
Init EMAC registers
USBD started
SenUSB NDIS Driver
Reading programmed USB Configuration...
dUSB init OK
encryptiInit Mibs
on key requests
Use DHCP
VoIP card interface is NOT enabled.
The tuner is a TEMIC_4907_8768
The upstream amplifier is a MicroTune 1530
Periodic ranging timeouts are enabled
Preamble type will be set by the burst profiles
Use default MCNS symbol rates.
BCM3345
134ce7865
Boot Code SW Version 3.11.3
BCM3345 Ambit
S12ce7865Detect MXIC MX219LV160B Flash
Ambit Cable Modem Console Management
NETWORK INTERFACE PARAMETERS:
IP address on LAN is 192.168.100.1
LAN interface's subnet mask is 255.255.255.0
HARDWARE PARAMETERS:
This board's Ethernet hardware address is 00:02:8A:68:32:5E
This board's USB Interface hardware address is 00:02:8A:68:32:5F
CABLE MODEM APPLICATION PARAMETERS:
IP address of the TFTP host is [62.253.189.100]
The file to download and start is ntlhm120_ntl0003.cpr
Detect MXIC MX219LV160B Flash
Running image1 !!!!!
BCM3345 Image
S12ce7865Detect MXIC MX219LV160B Flash
##ECS Magic number was wrong. Working with default value.
Updating parameter storage. This may take a while...
<USB ni init>
Location of Root is 80106154
Running from RAM
Detect MXIC MX219LV160B Flash
This is image1
Detect a filesystem
Boot loader updated....
Perfect modem.
DNS service enable
DHCP Server init (Use Default)
4 Upstream Queues Configured.
Creating USB task
Flushing event log
Issue software reset
Waiting for reset finished
Init EMAC registers
USBD started
SenUSB NDIS Driver
Reading programmed USB Configuration...
dUSB init OK
encryptiInit Mibs
on key requests
Use DHCP
VoIP card interface is NOT enabled.
The tuner is a TEMIC_4907_8768
The upstream amplifier is a MicroTune 1530
Periodic ranging timeouts are enabled
Preamble type will be set by the burst profiles
Use default MCNS symbol rates.
BCM3345
134ce7865
Boot Code SW Version 3.11.3
BCM3345 Ambit
S12ce7865Detect MXIC MX219LV160B FlashDisable console output

[shreksta]

Ambit Cable Modem Console Management
NETWORK INTERFACE PARAMETERS:
IP address on LAN is 192.168.100.1
LAN interface's subnet mask is 255.255.255.0
HARDWARE PARAMETERS:
This board's Ethernet hardware address is 00:02:8A:68:32:5E
This board's USB Interface hardware address is 00:02:8A:68:32:5F
CABLE MODEM APPLICATION PARAMETERS:
IP address of the TFTP host is [62.253.189.100]
The file to download and start is ntlhm120_ntl0003.cpr
Detect MXIC MX219LV160B Flash
Running image1 !!!!!
BCM3345 Image
S12ce7865Detect MXIC MX219LV160B Flash
##ECS Magic number was wrong. Working with default value.
Updating parameter storage. This may take a while...
<USB ni init>
Location of Root is 80106154
Running from RAM
Detect MXIC MX219LV160B Flash
This is image1
Detect a filesystem
Boot loader updated....
Perfect modem.
DNS service enable
DHCP Server init (Use Default)
4 Upstream Queues Configured.
Creating USB task
Flushing event log
Issue software reset
Waiting for reset finished
Init EMAC registers
USBD started
SenUSB NDIS Driver
Reading programmed USB Configuration...
dUSB init OK
encryptiInit Mibs
on key requests
Use DHCP
VoIP card interface is NOT enabled.
The tuner is a TEMIC_4907_8768
The upstream amplifier is a MicroTune 1530
Periodic ranging timeouts are enabled
Preamble type will be set by the burst profiles
Use default MCNS symbol rates.
BCM3349A0
100000010346890
MemSize: ......................... 8M
Flash detected @0xbe000000
Signature: a603
Broadcom BootLoader Version: 3.1.6d release Gnu
Build Date: May 30 2007
Build Time: 09:18:45
Image 1 Program Header:
Signature: a603
Control: 0005
Major Rev: 0000
Minor Rev: 0000
Build Time: 2007/6/29 09:55:05 Z
File Length: 935084 bytes
Load Address: 80010000
Filename: ecram_sto.bin
HCS: 27c9
CRC: 335c0056
HCS failed on Image 2 Program Header
Performing CRC on Image 1...
Detected LZMA compressed image... decompressing...
Target Address: 0x80010000
Decompressed length: 3670282
Executing Image 1...
eCos - hal_diag_init
Init device '/dev/ttydiag'
Init tty channel: 8035d068
Init device '/dev/tty0'
Init tty channel: 8035d088
Init device '/dev/haldiag'
HAL/diag SERIAL init
Init device '/dev/ser0'
BCM 33XX SERIAL init - dev: 0.2
Set output buffer - buf: 80391980 len: 2048
Set input buffer - buf: 80392180 len: 2048
BCM 33XX SERIAL config
Current Boot Image : 1
file length= 935084
program header length :92
Flash driver opened.
Total Parse 25 element
ParseTLV Successd !
Reading Permanent settings from non-vol...
Checksum for permanent settings: 0x42312e3e
* One or more of the settings groups was upgraded.
Settings were read and verified.
Reading Dynamic settings from non-vol...
Checksum for dynamic settings: 0x8f645e07
Settings were read and verified.
boot loader version = 3164
Tag : 11, Length : 1, Value =1
Tag : 12, Length : 1, Value =1
Tag : 13, Length : 1, Value =1
Tag : 14, Length : 1, Value =0
Tag : 15, Length : 1, Value =0
Tag : 16, Length : 1, Value =0
Tag : 17, Length : 1, Value =0
Tag : 18, Length : 1, Value =1
Tag : 19, Length : 1, Value =1
Tag : 1a, Length : 1, Value =1
Tag : 1b, Length : 1, Value =0
Tag : 1c, Length : 1, Value =0
Tag : 1d, Length : 1, Value =0
Tag : 1e, Length : 1, Value =0
Tag : 29, Length : 1, Value =1
Tag : 2d, Length : 1, Value =3
Tag : 64, Length : 120, Value =41 4d 42 49 54 20 45 75 72 6f 20 44 4f 43 53 4
9 53 20 32 2e 30 20 43 61 62 6c 65 20 4d 6f 64 65 6d 20 3c 3c 48 57 5f 52 45 56
3a 20 31 2e 31 39 3b 20 56 45 4e 44 4f 52 3a 20 41 4d 42 49 54 3b 20 42 4f 4f 54
52 3a 20 33 2e 31 2e 36 64 3b 20 53 57 5f 52 45 56 3a 20 32 2e 39 34 2e 31 30 3
1 34 3b 20 4d 4f 44 45 4c 3a 20 45 30 38 43 30 30 37 3e 3e 0 0 0 0 0
Tag : 6a, Length : 8, Value =33 2e 31 2e 36 64 0 0
Tag : 6b, Length : 8, Value =31 2e 31 39 0 0 0 0
Tag : 65, Length : 16, Value =32 2e 39 34 2e 31 30 31 34 0 0 0 0 0 0 0
Tag : 66, Length : 16, Value =32 2e 39 34 2e 31 30 31 34 0 0 0 0 0 0 0
Tag : 67, Length : 24, Value =31 2e 33 2e 36 2e 31 2e 34 2e 31 2e 34 36 38 34
2e 32 2e 31 2e 36 0 0
Tag : 68, Length : 44, Value =41 6d 62 69 74 20 63 61 62 6c 65 6d 6f 64 65 6d
20 61 67 65 6e 74 20 76 65 72 73 69 6f 6e 20 32 0 0 0 0 0 0 0 0 0 0 0 0
Tag : 69, Length : 28, Value =31 2e 33 2e 36 2e 31 2e 34 2e 31 2e 34 36 38 34
2e 32 2e 33 2e 31 2e 31 2e 32 2e 31
vvv Interface creation and driver startup beginning vvv
-> Begin DOCSIS CM WAN interface
Creating HAL object for the DOCSIS CableModem interface
numFreqPlan 4
Registering DOCSIS CableModem driver
0000000 - The DS Channel List is being updated (RFI-N-03.0086).
0000001 - The list is empty; adding a single default scanning entry.
-> End DOCSIS CM WAN interface
-> Begin Ethernet LAN interfaces
Creating HAL object for the Ethernet interface
Registering Ethernet driver
-> End Ethernet LAN interfaces
-> Begin USB LAN interface
Creating HAL object for the USB 1.1 interface
Registering USB driver
0000002 - CM HAL reports h/w support for PHS, bitmask=3
0000003 - CM HAL reports h/w support for PHS, size=64
-> End USB LAN interface
-> Begin IP Stack interfaces
-> Starting V2 DHCP Client subsystem...
Creating HAL object for IP Stack1 (MAC Addr=00:14:a4:ca:3a:6c)
Registering IP Stack1 driver
Creating HAL object for IP Stack2 (MAC Addr=00:02:8a:de:ad:02)
Registering IP Stack2 driver
IP Stack3 not enabled or failed to create and start interface; no other
stacks will be loaded.
-> End IP Stack interfaces
^^^ Interface creation and driver startup complete ^^^
Propane version: 2.0.1 (28 Oct 2002)
DON'T think we need to go here - so don't:::: init_mib !!!!
WARNING: netsnmp_brcm_create_tstring called with no address!
Creating SNMP agent cablemodem agent
Creating SNMP agent CPE diag agent
0000004 - Successfully added MAC Management address to CAM
0000005 - Interface 10 additional registration w/ SNMP agent OK.
| Build Date: Jun 29 2007 |
| Build Time: 17:55:00 |
| Built By: alex |
| Firmware version : 2.94.1014 |
| Hidden version : 2.94.1014 |

[cockneysean]

Needs more info please mate.

What exactly are you trying to do and what did you to get there? ^

[shreksta]

i got this in hyperterminal when i was starting to flash the ambit 255. ive not installed anything as i cant get no p option comes up with all that info