255 firmware ?

[uksrevivor]

Can anyone comfirm that the haynes tut is upto date?
i.e the firmware 250hack_dump_telnet.bin - 2,048kb is this correct size and latest firmware?
Thanks in advance.

[uksrevivor]

Is Haxorware 11 rev30 the correct firmware for ambit 255 ?

Please can someone comfirm.

Thanks

[Bad_Ad84]

1.1 rev 30 is latest firmware for that modem.

[uksrevivor]

Thanks m8.
Your a diamond.

[Bad_Ad84]

if you are following the haynes guide, using the "just firmware" image will brick the modem if you follow the guide.

the guide uses 2mb dumps, which are also available on the haxorware website, if you use one of these you can follow the guide exactly.

[uksrevivor]

Thanks m8
Have you got a d/l link for that file as can't find it via gooogle.
Your a diamond m8

[Bad_Ad84]

Haxorware

shockingly obvious url

[TechWreck]

Hi just quick one , it was the great bad_ad84 who got me there with haxoware 11.rev30 and its the dogs !

like bad said follow the right tut for the haxo 1.1rev30 it is only a 1mb dump if you follow the full haxo tut you will write over the bootloader !.

basically when you get to the menu and ready to flash and it gives you the 0, 1,2 option
you MUST PICK ,1. for the Haxoware 1.1 rev30 !

Haxo Rocks !

[Bad_Ad84]

as above for the "firmware only" image which is definately the prefered method.

2mb dump if following the haynes tutorial, which is not the prefered method.

[uksrevivor]

Trying to install haxorware version 11rev30.bin using correct tut but im getting this message does this mean that there is no noisy bootloader on it? and if so how do i install that and what file do i need thanks in advance any help is much appreciated

BCM3349A0
100000010346890
MemSize: ......................... 8M
Flash detected @0xbe000000
Signature: a60
Broadcom BootLoader Version: 3.1.6d release Gnu
Build Date: May 30 2007
Build Time: 09:18:45
Image 1 Program Header:
Signature: a603
Control: 0005
Major Rev: 0000
Minor Rev: 0000
Build Time: 2007/6/29 09:55:05 Z
File Length: 935084 bytes
Load Address: 80010000
Filename: ecram_sto.bin
HCS: 27c9
CRC: 335c0056

HCS failed on Image 2 Program Header
Performing CRC on Image 1...
Detected LZMA compressed image... decompressing...
Target Address: 0x80010000
..............
Decompressed length: 3670282
Executing Image 1...

eCos - hal_diag_init
Init device '/dev/ttydiag'
Init tty channel: 8035d068
Init device '/dev/tty0'
Init tty channel: 8035d088
Init device '/dev/haldiag'
HAL/diag SERIAL init
Init device '/dev/ser0'
BCM 33XX SERIAL init - dev: 0.2
Set output buffer - buf: 80391980 len: 2048
Set input buffer - buf: 80392180 len: 2048
BCM 33XX SERIAL config
Current Boot Image : 1
file length= 935084
program header length :92
Flash driver opened.
Total Parse 25 element
ParseTLV Successd !
Reading Permanent settings from non-vol...
Checksum for permanent settings: 0x5025833f
One or more of the settings groups was upgraded.
Settings were read and verified.
Reading Dynamic settings from non-vol...
Checksum for dynamic settings: 0x270d39ab
Settings were read and verified.
boot loader version = 3164
Tag : 11, Length : 1, Value =1
Tag : 12, Length : 1, Value =1
Tag : 13, Length : 1, Value =1
Tag : 14, Length : 1, Value =0
Tag : 15, Length : 1, Value =0
Tag : 16, Length : 1, Value =0
Tag : 17, Length : 1, Value =0
Tag : 18, Length : 1, Value =1
Tag : 19, Length : 1, Value =1
Tag : 1a, Length : 1, Value =1
Tag : 1b, Length : 1, Value =0
Tag : 1c, Length : 1, Value =0
Tag : 1d, Length : 1, Value =0
Tag : 1e, Length : 1, Value =0
Tag : 29, Length : 1, Value =1
Tag : 2d, Length : 1, Value =3
Tag : 64, Length : 120, Value =41 4d 42 49 54 20 45 75 72 6f 20 44 4f 43 53 4
9 53 20 32 2e 30 20 43 61 62 6c 65 20 4d 6f 64 65 6d 20 3c 3c 48 57 5f 52 45 56
3a 20 31 2e 31 39 3b 20 56 45 4e 44 4f 52 3a 20 41 4d 42 49 54 3b 20 42 4f 4f 54
52 3a 20 33 2e 31 2e 36 64 3b 20 53 57 5f 52 45 56 3a 20 32 2e 39 34 2e 31 30 3
1 34 3b 20 4d 4f 44 45 4c 3a 20 45 30 38 43 30 30 37 3e 3e 0 0 0 0 0
Tag : 6a, Length : 8, Value =33 2e 31 2e 36 64 0 0
Tag : 6b, Length : 8, Value =31 2e 31 39 0 0 0 0
Tag : 65, Length : 16, Value =32 2e 39 34 2e 31 30 31 34 0 0 0 0 0 0 0
Tag : 66, Length : 16, Value =32 2e 39 34 2e 31 30 31 34 0 0 0 0 0 0 0
Tag : 67, Length : 24, Value =31 2e 33 2e 36 2e 31 2e 34 2e 31 2e 34 36 38 34
2e 32 2e 31 2e 36 0 0
Tag : 68, Length : 44, Value =41 6d 62 69 74 20 63 61 62 6c 65 6d 6f 64 65 6d
20 61 67 65 6e 74 20 76 65 72 73 69 6f 6e 20 32 0 0 0 0 0 0 0 0 0 0 0 0
Tag : 69, Length : 28, Value =31 2e 33 2e 36 2e 31 2e 34 2e 31 2e 34 36 38 34
2e 32 2e 33 2e 31 2e 31 2e 32 2e 31
vvv Interface creation and driver startup beginning vvv
-> Begin DOCSIS CM WAN interface
Creating HAL object for the DOCSIS CableModem interface
numFreqPlan 4
Registering DOCSIS CableModem driver
0000000 - The DS Channel List is being updated (RFI-N-03.0086).
0000001 - The list is empty; adding a single default scanning entry.
-> End DOCSIS CM WAN interface
-> Begin Ethernet LAN interfaces
Creating HAL object for the Ethernet interface
Registering Ethernet driver
-> End Ethernet LAN interfaces
-> Begin USB LAN interface
Creating HAL object for the USB 1.1 interface
Registering USB driver
0000002 - CM HAL reports h/w support for PHS, bitmask=3
0000003 - CM HAL reports h/w support for PHS, size=64
-> End USB LAN interface
-> Begin IP Stack interfaces
-> Starting V2 DHCP Client subsystem...
Creating HAL object for IP Stack1 (MAC Addr=00o:00:00:00:00)
Registering IP Stack1 driver
Creating HAL object for IP Stack2 (MAC Addr=00:00::00:00:00)
Registering IP Stack2 driver
IP Stack3 not enabled or failed to create and start interface; no other
stacks will be loaded.
-> End IP Stack interfaces
^^^ Interface creation and driver startup complete ^^^
Propane version: 2.0.1 (28 Oct 2002)
DON'T think we need to go here - so don't:::: init_mib !!!!
WARNING: netsnmp_brcm_create_tstring called with no address!
Creating SNMP agent cablemodem agent
Creating SNMP agent CPE diag agent
0000004 - Successfully added MAC Management address to CAM
0000005 - Interface 10 additional registration w/ SNMP agent OK.
************************************
*** Start up CPU load monitor module
************************************
Broadcom Corporation Reference Design
| _/_/ _/_/_/_/ _/_/ |
| _/ _/ _/ _/ _/ Broadband |
| _/ _/ _/ _/ |
| _/_/ _/_/_/ _/ Foundation |
| _/ _/ _/ _/ |
| _/ _/ _/ _/ _/ Classes |
| _/_/_/ _/ _/_/ |
| Copyright (c) 1999 - 2005 Broadcom Corporation |
| Revision: 3.9.32 RELEASE |
| Features: MinimalConsole Nonvol Slim HeapManager SNMP Networking USB1.1 |
| Standard Embedded Target Support for BFC |
| Copyright (c) 2003-2004 Broadcom Corporation |
| Revision: 3.0.1 RELEASE |
| Features: PID=0xa603 Bootloader-Rev=3.1.6d |
| Features: Bootloader-Compression-Support=0
| eCos BFC Application Layer |
| Copyright (c) 1999 - 2004 Broadcom Corporation |
| Revision: 3.0.2 RELEASE |
| Features: eCos Console Cmds, (no Idle Loop Profiler) |
| _/_/ _/ _/ |
| _/ _/ _/_/ _/_/ DOCSIS Cable Modem |
| Copyright (c) 1999 - 2005 Broadcom Corporation |
| Revision: 3.9.32 RELEASE |
| Features: AckCel(tm) DOCSIS 1.0/1.1/2.0 Propane(tm) CM SNMP w/Factory MIB |