Problem Jtagging a dead sl65 e1

[dacogawa]

Hi All,

I'm trying to jtag my dead silvercrest sl65 e1 (6 pin) and i'm having problems, when i use the JTag-ALI-SL65-35-35s it is sticking, i left it on overnight but was still the same in the morning (3 number 8's on the display, when it was not working i was just getting 1 no.8, when jtag is plugged in i get 2, and when flash-sl65-35.exe is running i get 3)
the jtag lead is tested and ok.
in flash-sl65-35.exe i am getting the message:


xe -flash:wholeflash /skipdetect /instrlen:5 /alienable /fc:2 /window:0x1fc00000
/start:0x1fc00000/length:0x10000

====================================
WRT54G/GS EJTAG Debrick Utility v4.8
====================================

Probing bus ... Done

Instruction Length set to 5

CPU Chip ID: 11111111111111111111111111111111 (FFFFFFFF)
*** CHIP DETECTION OVERRIDDEN ***

- EJTAG IMPCODE ....... : 11111111111111111111111111111111 (FFFFFFFF)
- EJTAG Version ....... : Unknown (7 is a reserved value)
EJTAG Implementation flags: R3k DINTsup ASID_8 ASID_6 MIPS16 NoDMA MIPS64

Issuing Processor / Peripheral Reset ... Done
Enabling Memory Writes ... Skipped
Init PrAcc ...


-------------------------------------------------------------------------

And then it just stays with the cursor blinking after 'Init PrAcc'


Is this completley dead or am i just not doind somthing right ?
I have giveio running properly as well and my jtag lead is made as the speq in ALi-6PiN-JTAG.jpg

Thanks in advance for any help

[dacogawa]

does anyone have any answers, please

[dacogawa]

Got my problem solved by jbvid if anyone has the same problem check out this link

h**p://satboard.uk.to/forum/index.php?topic=1404.0