pace 1000 error 2

[royboy]

hi everyone have managed to find ird and bk for my pace 1000 but now ive powerd it up ive got error 2 come up have read through and found it could be led simm needs cleaning but have no idea where this is situated any help much appreciated also if im right when i come to programme card i need the flash file for my area but cant seem to find a flash file on tool bar only hex files can anyone tell me what im missing as only learning on the cards thanks.Royboy

[reddiesel]

Originally Posted by royboy

hi everyone have managed to find ird and bk for my pace 1000 but now ive powerd it up ive got error 2 come up have read through and found it could be led simm needs cleaning but have no idea where this is situated any help much appreciated also if im right when i come to programme card i need the flash file for my area but cant seem to find a flash file on tool bar only hex files can anyone tell me what im missing as only learning on the cards thanks.Royboy

Its the upright card, open clips on side and tilt forward to remove, clean contacts with pencil rubber or lint free cloth, when replacing locate in tilted forward position and as you tilt upright make sure it locates in socket ,slight pressure downwards helps, it should clip back in itself.
Chaos fix nov 08 is in downloads.

[royboy]

Reddiesel many many thanks got box up and running again but still lost with the download i thought you had to get a flash file but the download you mentioned is a hex file and does not mention any flash file?? i no its me missing something so need all the help i can get.im not being lazy as i have read and read but keep seeing flash file needed many thanks.

[reddiesel]

Originally Posted by royboy

Reddiesel many many thanks got box up and running again but still lost with the download i thought you had to get a flash file but the download you mentioned is a hex file and does not mention any flash file?? i no its me missing something so need all the help i can get.im not being lazy as i have read and read but keep seeing flash file needed many thanks.

Im guessing its a fun card you need toxic or rhv1 with swapbinhex for exteep, put swapbinhex on desktop, open toxic or rhv1 and put in ird and bk, ird goes forwards in toxic and reverse in rhv1, make up cam id, click on area button, save to desk top, you have to name it exteep or anything, on desktop click on exteep file and drag it into swapbinhex, an exteep hex file will pop up, thats your exteep, chaos fix nov 08 is your flash file, load exteep and flash in programmer using funcard setting and write.

[royboy]

Originally Posted by reddiesel

Im guessing its a fun card you need toxic or rhv1 with swapbinhex for exteep, put swapbinhex on desktop, open toxic or rhv1 and put in ird and bk, ird goes forwards in toxic and reverse in rhv1, make up cam id, click on area button, save to desk top, you have to name it exteep or anything, on desktop click on exteep file and drag it into swapbinhex, an exteep hex file will pop up, thats your exteep, chaos fix nov 08 is your flash file, load exteep and flash in programmer using funcard setting and write.

Reddiesel many thanks done it word for word but i dont know if its the box or my programming as all i can get is fta channels it wont even go to any other channel its as if its only got the fta channels programmed into it ?? is it me or box many thanks.

[royboy]

Originally Posted by reddiesel

Im guessing its a fun card you need toxic or rhv1 with swapbinhex for exteep, put swapbinhex on desktop, open toxic or rhv1 and put in ird and bk, ird goes forwards in toxic and reverse in rhv1, make up cam id, click on area button, save to desk top, you have to name it exteep or anything, on desktop click on exteep file and drag it into swapbinhex, an exteep hex file will pop up, thats your exteep, chaos fix nov 08 is your flash file, load exteep and flash in programmer using funcard setting and write.

ps its a funcard 5

[abaaba]

if u got ur IRD/BK then all u nee is follow this tut

funcard netid tutorial

PS: u dont need inteep anymore and the flash u want is the 28/11/2008 fix for ur area ie (pure TW or EX CW)

[royboy]

Originally Posted by abaaba

if u got ur IRD/BK then all u nee is follow this tut

funcard netid tutorial

PS: u dont need inteep anymore and the flash u want is the 28/11/2008 fix for ur area ie (pure TW or EX CW)

Abaaba thanks for advice but do i still need to do this as i have the correct net id on the box already and programmed card but the box dosent even list any other channels except fta????

[abaaba]

Originally Posted by royboy

Abaaba thanks for advice but do i still need to do this as i have the correct net id on the box already and programmed card but the box dosent even list any other channels except fta????

M8 Sorry i was at work didnt get the right link.

here is the right1
Funcard Tutorial

u dont need to do netid

[reddiesel]

Originally Posted by royboy

Reddiesel many thanks done it word for word but i dont know if its the box or my programming as all i can get is fta channels it wont even go to any other channel its as if its only got the fta channels programmed into it ?? is it me or box many thanks.

If you used rhv1 your ird ie 12 AB 34 CD would be CD 34 AB 12, toxic is just as is, did you use right area flash ?