Post Telnet Commands Here

[cloughy_21]

sorry

[sr20]

Spoofing SNMP values in Haxorware (A250 values given):

HW_REV (from sysDescr):
cd /
cd n/M
cm_hwrev (enter hw rev here...decimals don't work in Hax FW)
write

sysName:
cd /
cd n/s
sysName O2.94.1015 (yes I know that's the letter O not a Zero)
write

docsDevSwFilename:
cd /
cd n/s
docsDevSwFilename C2941015FU031009_VM.cdf
write

docsDevSwOperStatus:
cd /
cd n/s
docsDevSwOperStatus 2
write

docsDevSwServer:
cd /
cd n/s
docsDevSwServer 10.137.103.7
write

Stealth page of haxorware CP:
Vendor: AMBIT
Model: E08C007
Software Version: 2.94.1015

sr20

[G77]

check hfc lease time

cd ip
lease_show 1
y

if it returns 120 secs, try another mac

[sr20]

Change NIC MAC and IP on the fly..

cd n/h
eth_reject_cam 0
write
cd /
res

Once the modem's rebooted you can now change your NIC's MAC on the fly without having to reboot the modem.

This means if your NIC MAC ever gets blacklisted you can just change it.

Also if you ever need to get a new IP you can just change ur NIC MAC and you will instantly be given a new IP
wup! wup! lol

sr20

[Notthisagain]

-------------------------
Hide System OID
-------------------------
cd /s
delete sysDescr
write


What about the opposite of this, show oid?

[sr20]

Originally Posted by Notthisagain

-------------------------
Hide System OID
-------------------------
cd /s
delete sysDescr
write


What about the opposite of this, show oid?

There is no 'delete' command...this is ****e.

sr20

[River-Rat]

i maybe dumb but when i load web ui and type nothing shows? do i just type all the command and hit enter?

do i have to go straight to modem, or can do via a router?

[sr20]

Originally Posted by seamouse

i maybe dumb but when i load web ui and type nothing shows? do i just type all the command and hit enter?

do i have to go straight to modem, or can do via a router?

Easy mistake to make, you need to be typing into the smaller box at the bottom of the web UI page. Enter commands one line at a time, pressing enter after each line.

The larger box is just to display output from the modem.

Direct to modem or via router should both work fine

sr20

[River-Rat]

will try later

[sr20]

In Haxorware these are confirmed working. Will likely work on other FW's too, but not tested yet.


cd /s
set cmConfigEnableAllEventLogPriorities int 1
(yes)
cd /n
write

The above greatly increases detail level of event log.


cd /s
set cmConfigT3TimeoutInitRngRetries int 5
(yes)
cd /n
write

The above seems to prevent US blacklisting at the CMTS

sr20