help with haxorware please i used infinite telnet cmds

[newcastle1983]

hello just changed to haxorware and went in to hyperterminal to force 20 meg i used these commands and now cant get online i dont have a clue what to do lol



cd \cm_hal
scan_stop
cd \
cd \non
write
cd \
write_memory -s 4 0x807e8b98 0x
write_memory -s 2 0x807e8b9c 0x
cd \non
write
cd \
cd \non
cd hal
cm_tuner 19
write
annex_b
write
usb_mac_address 00:02:8A:69:34:9C
cd \non
cd doc
dhcp_settings
192.168.100.1
255.255.255.0
192.168.100.254
y
10.137.103.8
cmreg-ntlhm250-rts22.cm
10.10.10.254
10.10.10.254
enable force_cfgfile true
write
cd /
cd snmp
view_v1v2 Noaccess
write
cd /
cd non-vol
cd msg-log
telnet_ipstacks 2
write
cd non-vol
cd snmp
max_dload_tries 0
write
cd \non
cd msg
user_name ________________
password _____________
http_admin ______________________
write
cd /
cd non-vol
cd snmp_cm
docsDevSerialNumber cm0778481933912
write
cd /non-vol/docsis
enable bpi false
write
cd /
reset

[lee-ds]

Don't use HT, use the webgui *ttp://192.168.100.1

[newcastle1983]

tried usin that a dunno what settings to use mate

[lee-ds]

Settings-

General:

Factory Mode - Unticked
Disable Firmware Upgrades - Ticked
Force Network Access - Ticked
Tftp Enforce Bypass - (leave unticked for now) Ticked
Disable IP Filters on Startup - Unticked
Current IP Filters Status - Optimized

Administration:

Control Panel IP Address - 192.168.100.1
DHCP Server - Ticked
Telnet Server - Unticked
Username - Root
Password - Admin

Press Save

Frequency Settings:

Annex - Both
Plan - European
Preferred DS Freq 1 - 402750000 (this is for NTL) (TW are 331000000 or 339000000)C&W frequency - 586750000
2 and 3 -just enter 0
Upstream channel - dont change (will change on its own)

Press Save

Addresses:

HFC MAC - Your Mac Address
Ethernet Mac - Dont touch
USB MAC - Copy your HFC MAC address, only this time change the last letter/number on it to 1 letter/number higher.
Serial Number - Dont Touch

Press Save

Config File:

Server IP: (leave for now) Put whatever your server IP address you are using here, you can get it from DHCPforce.
Filename: (leave for now) Whastever you wish for your filename to use, if you want to force the 20mb option, then use - cmreg-ntlhm250-bund03.cm for NTL area, once again TW etc will be different.

Autoserve Enabled - Unticked
Stored cfg/store new config - no need to do anything here.

Press Save

Baseline Privacy:

BPI - Disabled
Certificate - BPI Public Key

All the rest in the Baseline privacy section will not be touched.

Press Save, basically press save in every page when ever you change settings otherwise they wont stick.

Original TUT by pokerplayer

[newcastle1983]

thanks mate sorted

[lee-ds]

No probs fella

[newcastle1983]

how can i force 20meg when i enter the file name and save reboot it doesnt work

[baked188]

Think it depends where you live mate. in nottingham if i force config it doesnt work at all, so i dont force and its been on a full 24hrs now.

Whereas ive read other people can force them and they work.

[MorriSoft]

Originally Posted by baked188

Think it depends where you live mate. in nottingham if i force config it doesnt work at all, so i dont force and its been on a full 24hrs now.

Whereas ive read other people can force them and they work.

What UBR are you on?

Notts working fine here, 20meg forced, 2 days.