Any modems down post here

[G77]

w00t. post reults in other thread

if it drops the internal/external lease, just repair but hopefully it wont

[rdev1989]

im from leeds, c&w area, using infinite,
a good few weeks ago now my modem went off, then it will work for 5 mins every couple of days,
can somewone help me sort it out pls.

[G77]

upgrade to haxorware fitz fix 0.3

get operational, download the config from the status page, open in vultureware

set haxorware freq to whatever it says in config file

try lots of macs

[chrisw125]

I recently got bored and decided to go looking for a couple of good macs, i found a few but most were dropping, this was also to experiment with autoserving but it didn't work anyway i found a mac with the config cmreg-ntlhm250-rts01-nb now, the mac with this seems golden been up for a day so far no dropping all it took was a downstream freq and a couple reboots to get operational, when getting the config i have tftp enforce bypass ticked and no ftp server address in the config file settings page this seems to work for me oh btw the rts01 is for 20mb and the nb is for docsis one, hopefully you guys will have some luck

[adam1]

Which version of the Mr Fitz's 'Fix' file is working for you guys in EXCW area (near Manchester)? Version 1,2,3,or 4?

I want to flash the file that will work for Excw areas.

[toolzkit]

using v3 at the minute working fine, just have to find a good mac.
did not know there was a v4 where is it wizarmods?

[adam1]

Originally Posted by toolzkit

using v3 at the minute working fine, just have to find a good mac.
did not know there was a v4 where is it wizarmods?

Yea, u can dl the file from WM.


I tried V3, mac only worked for an hour.

I'm going to try V4 now...

[bobleeds]

my modem has just been cut off, i live in leeds 9

been forcing 20 meg from a 2 meg mac for months, now it says limited or no connectivity, now im not forcing it comes on 2 meg fine......

anyone know if theres a new config and ip to force?

[G77]

Originally Posted by bobleeds

my modem has just been cut off, i live in leeds 9

been forcing 20 meg from a 2 meg mac for months, now it says limited or no connectivity, now im not forcing it comes on 2 meg fine......

anyone know if theres a new config and ip to force?

read this thread, you'll find all what you need to know in here

[iondy]

Originally Posted by bobleeds

my modem has just been cut off, i live in leeds 9

been forcing 20 meg from a 2 meg mac for months, now it says limited or no connectivity, now im not forcing it comes on 2 meg fine......

anyone know if theres a new config and ip to force?

For the sake of repeating but to save you some time, run DHCP Force, put in your MAC and then click discover and check what TFTP server comes up and then use that. I had same issue yesterday, turns out my default TFTP server had changed.