Any modems down post here

[G77]

modems down using 298750000 in c+w and custom configs

back on with 586750000 and any old mac

no more 43 mbit for me!

[hitman000]

Hi i dont know if anyone can help me here but i have a 255 modem with haxorware 1.1 rev 32, the mac im using lets me online with no forced config, but every 15 mins it kicks me off and stays on ranging complete, the freq changes itself to 331000000 and when i put freq 1 back to 402750000 and reboot it comes back on again

HFC Parameters
Mode DHCP IP Address 10.37.79.117
Subnet 255.255.252.0
TFTP Server 10.37.76.1
TFTP Filename 54k;fg87dsfd;kfoA,.i
ToD Server 62.253.131.111

is there a setting wrong of some sort maybe, i have followed most of the tuts of setting haxorware up but it still does the same

BPI - Disabled

All other settings are set according to tuts on here, mac's are setup properly i presume..

Thanks

I am also in the teesside area lol

[hitman000]

Please ignore my previous post lol i found out what the problem was... Bad MAC address, got a new mac off a friend today and its been on 2 hours or so with no drops, so fingers crossed this will work for a good while.

Cheers

Dan

[50pounds]

Originally Posted by hitman000

Please ignore my previous post lol i found out what the problem was... Bad MAC address, got a new mac off a friend today and its been on 2 hours or so with no drops, so fingers crossed this will work for a good while.

Cheers

Dan

dont forget to change NIC mac and Router mac

spoof them with SMAC or any other tool to change them mate.

[cockneysean]

Originally Posted by 50pounds

dont forget to change NIC mac and Router mac

spoof them with SMAC or any other tool to change them mate.

Well you only need to change one really. If you are using a router just change its MAC. I find thats the easiest option when using a router.

[themong]

Originally Posted by cockneysean

Well you only need to change one really. If you are using a router just change its MAC. I find thats the easiest option when using a router.

im still maniging to fore a 2mb to a 10mb connection using the normal configs
cpc2-farn0-0-0--custXXX.glfd.cable.ntl.com

so far so good been stable for 2 weeks now

[AntonMatthews]

i try & try & try to get a 20meg mac staying stable and it wont work !, i have the recent haxo on my 255..... any ideas???? thanks in advance

[hammy545]

Originally Posted by AntonMatthews

i try & try & try to get a 20meg mac staying stable and it wont work !, i have the recent haxo on my 255..... any ideas???? thanks in advance

once the mac is workin with 20mb leave the modem powered on for a few days and dont unplug the ethernet. this usually works for me?

[themong]

Originally Posted by hammy545

once the mac is workin with 20mb leave the modem powered on for a few days and dont unplug the ethernet. This usually works for me?

i still use infinate seems to be less hassle

[frankwhite]

Got problems if any one can help, keep getting the vm activation page when i try to connect? nottingham. thanks