Any modems down post here

[djreal]

just checked my setup page it doesnt say haxoware

[ant16151189]

go to 192.168.100.1 in your web browser

if its haxorware you will presented by it.

[djreal]

it is then because thats what brought up the set up page

[taximonkey]

Hi,Could anyone point me in the right direction setting up my Ambit 255 with Haxorware 1.1 Rev 31.
Im in Middlesbrough. My modem has been offline for a few months but i thought i would give it another go.
Ive just tried 3 new MAC addresses and none of them work, the furthest i get is 'Ranging Complete'or 'IP complete' and keeps scanning and ranging.
Configuration Settings:
Factory mode unticked, Disable firmware upgrades ticked,Force Network access ticked, TFTP enforce bypass unticked, Ignore unknown messages ticked, Disable ip filters unticked.
Frequency:
Annex both, Plan European, Fr1 402750000, Fr2 331000000, Fr3 331000000.Upstrem channel 2.
Addresses HFC mac and USB mac the same apart from 1 letter higher in USB mac, Ethernet mac is working sniffed mac..
Serial number 0014A4C2C24432
Certificate type Motorolla DOCSIS.
Config File:
Server IP 10.137.103.8
File name blank
Autoserve config file disabled, Store new config blank.
Baseline Privace (BPI+DOCSIS 1.1) Have tried disabled as well!
Everything else blank.
Advanced Static IP:
Force ststic IP unticked
Supress DHCP requests unticked
IP address 192.168.100.11
Subnet mask 255.255.255.0
Gateway 192.168.100.1
TPTP and Tod IP 10.137.103.8
TFTP Filename cmreg-ntlhm120-rts22cm.
Everything else pretty much blank.
Is there any specific type of MAC i should be using or not be using? Im in pure ntl area. ALso would it be better for me to upgrade to one of the newer versions of Haxorware?
Any help would be appreciated, cheers!

[funkyfones]

try these:

Settings-

General:

Factory Mode - Unticked
Disable Firmware Upgrades - Ticked
Force Network Access - UNTICKED
Tftp Enforce Bypass - ticked
Ignore Unknown Messages-UNTICKED
Disable IP Filters on Startup - ticked

Administration:

Control Panel IP Address - 192.168.100.1
DHCP Server - Ticked
Username - admin (change the password for added security)
Password - admin (change the password for added security)

Press Save

Frequency Settings:

Annex - Both
Plan - European
Preferred DS Freq 1 - 402750000 (this is for NTL), 586750000 (this is for cable and wireless), 331000000 (this is for telewest)
2 and 3 - 0
Upstream channel - dont change (will change on its own)

Press Save

Addresses:

HFC MAC - Your Mac Address
Ethernet Mac - Dont touch
USB MAC - Copy your HFC MAC address, only this time change the last letter/number on it to 1 letter/number higher.
Serial Number - Dont Touch
certificate type - motorola eurodocis

Press Save

Config File: LEAVE EMPTY

Server IP: LEAVE EMPTY


Autoserve disabled
Stored cfg/store new config - no need to do anything here.

Press Save

Baseline Privacy:

BPI disabled

All the rest in the Baseline privacy section will not be touched.

Press Save, basically press save in every page when ever you change settings otherwise they wont stick.

[taximonkey]

Thanks for that funky, I managed to get it working a few days ago.
Sniffed for macs and found a lot but the best i can get out of them is 10 meg max.
Tried forcing configs but am unable to here apparrently. Pure NTL Teesside.

[jahshaka99]

Hi All,

Can someone help me please, I have about 10 sb4200 and sb5100 running in birmingham but about 2 weeks ago they all went down. The online light never goes solid. I have changed macs, removed the config name but still no joy.

Can anyone help with this please.

Thanks.

[*DP*]

My Ambit 255 has just stopped working in Kingston Upon Thames, Surrey. I have tried a few MACs which I knew worked last week, and I get stuck on ranging

Does anyone have any suggestions on how to get it back up?

[G77]

modems down in c+w lancashire, 292 freq.

[sr20]

The end is nigh! lol.

2 meg MAC, old docs 1.0 freq and it should boot

sr20