Decrypting Encrypted Channels on FireDTV

[KuchKuch]

I have finally bought a copy of Windows Vista x86 and have got FireDTV to scan for all the channels and everything. I can watch the Free to Air Channels but not the Encrypted Channels. Could somebody please tell me how to do this. I believe I have to right-click go to view/conditional access module, but I have no idea what to do on the CAM Interface Menu. Any help would be appreciated.

[TwinTown]

Originally Posted by KuchKuch

I have finally bought a copy of Windows Vista x86 and have got FireDTV to scan for all the channels and everything. I can watch the Free to Air Channels but not the Encrypted Channels. Could somebody please tell me how to do this. I believe I have to right-click go to view/conditional access module, but I have no idea what to do on the CAM Interface Menu. Any help would be appreciated.

how r u planning to decrypt hardcam or softcam?

if softcam read the vplug sticky.....if hard cam post back with the cam and card ur using

[KuchKuch]

I'm using FloppyDTV with BlueZeta, so Hardcam. I'm hoping that once I get this working MCE shouldn't be a problem.

[TwinTown]

Originally Posted by KuchKuch

I'm using FloppyDTV with BlueZeta, so Hardcam. I'm hoping that once I get this working MCE shouldn't be a problem.

what firmware u got on the cam to give u a boxkey - joker 0.79 or zeta v2C272X?

what smartcard u got?

ps once u get this working that is the start of your problems if ur going to use MCE..

[KuchKuch]

I've got Joker 0.79 on the BlueZeta and I have a Fun4 Card. Thanks for getting my hopes up btw...knowing my luck I'll probably never get MCE up and running.

[TwinTown]

Originally Posted by KuchKuch

I've got Joker 0.79 on the BlueZeta and I have a Fun4 Card. Thanks for getting my hopes up btw...knowing my luck I'll probably never get MCE up and running.

u need to flash the fun with the latest (nov2008) au flash and img for your area....ex n*tl, c*w or t*w....u need to pair the cam and image boxkey and u should be ok to clear all channels

[KuchKuch]

Right OK...I have no idea how to do that. Is there anyway I can get a guide for that.

[Wavey]

Hi Kuchkuch,

I am doing the very same thing at the moment and will pass on what I have learned from the guys here.

There is guide for programming the card on the site somewhere.
"Ciwan's guide to programming a funcard 4" Will search for it in a bit.
It might be in the download section.

The first thing you need (1) is the Boxkey(BK) for your cam. You can get this by running the CommonInterface.exe that was installed with the firedtv drivers.
Then you need the (2) NTL bin file and the (3) Chaos Fix hex file from Nov08 from the Chatterbox toolbar.
Then you need (4) Nagraedit exe from above toolbar.

Once you have these four items, follow the tutorial above and you will be sorted.

Then all you have to do get MCE to F&^*ing work!
That is the step I am on at the moment.

Wavey

[TwinTown]

Originally Posted by KuchKuch

Right OK...I have no idea how to do that. Is there anyway I can get a guide for that.

have u got a programmer?

[KuchKuch]

No i don't have a programmer unfortunately.

Thanks for the info Wavey, but I believe I will need a programmer, before I can do any of that.