250 infinate to Haxorware

[cockneysean]

Sorry, just seen it.

You do not need the cable coax connected when flashing.

[themong]

Originally Posted by baked188

Upgrading from previous shelled firmware (infinite) or Haxorware 1.0

Set your computers ip to 192.168.100.10
Set up a TFTP server with haxorware11rev30.bin in its root(where do i do this)?????????????????????????
Make sure the haxorware webgui isn't currently open|(whats webgui????)
Connect to modem with hyperterminal or telnet to the IP 192.168.100.1
Enter your username and password
cd /ip
ipconfig 1 release
y
dload -i 1 -l -f 192.168.100.10 haxorware11rev30.bin
y
cd /
reset

Haxorware 1.1 should now boot

then go to http://192.168.100.1

dont be scared to answer these probley really stupid questions as i am just having a dumb moment and want to understand before i go thru with it...

[MorriSoft]

Originally Posted by themong

ok im gonna change mine can i just check do i disconnect the vm feed cable

Mate.

try these:

admin
password

admin
admin

admin
infinate

infinate
infinate

infinate
admin

root
admin

root
password

Try a few more combinations, it might be one of them

[lee-ds]

Originally Posted by themong

dont be scared to answer these probley really stupid questions as i am just having a dumb moment and want to understand before i go thru with it...

Set up a TFTP server with haxorware11rev30.bin in its root(where do i do this)?????????????????????????

Google: Tftpd32 (or it may be in the downloads section in the Private FTA forum)

You'll need to put the haxorware.bin file into the same folder as the Tftpd32 application.



Make sure the haxorware webgui isn't currently open|(whats webgui????)

That's the haxorware page you get when you enter http://192.168.100.1 in to your address bar.

[johnboy222]

Originally Posted by lee-ds

Set up a TFTP server with haxorware11rev30.bin in its root(where do i do this)?????????????????????????

Google: Tftpd32 (or it may be in the downloads section in the Private FTA forum)

You'll need to put the haxorware.bin file into the same folder as the Tftpd32 application.



Make sure the haxorware webgui isn't currently open|(whats webgui????)

That's the haxorware page you get when you enter http://192.168.100.1 in to your address bar.

Right am gonna try this now how do i connect the modem with hyperterminal or telnet??? answer to the above questions wud be good to cheers

[G77]

hyperteminal is telnet. well your using hyperterminal as telnet

hyperterm will ask you about your phone number ect, just make it up. its not important. it will then ask how you would like to connect, choose WINSTOCK and enter the ip as 192.168.100.1 and default port of 23

[johnboy222]

Originally Posted by smspop

Complete tut with Pics, not My work. Put "www" in front of that I can't post link

yousendit.com/download/UmNMa3ZPZDVEa1dGa1E9PQ

anyone know were i can get this from as this one says the file associated with this lnk has expired