|
||||||||||
| Cable Modems Gotta start somewhere and here's the place to start :) |
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) |
|
Senior Member
Join Date: Apr 2008
Posts: 129
Thanks: 6
Thanked 6 Times in 6 Posts
|
Hi guys, my Ambit 255 wont connect up anymore and I keep getting the message ''your modem does not have a valid ip configuration''.
I have just updated the firmware from Infinate to Haxorware hoping that would solve it but it didnt. I was told that Virmin must have bricked my modem but then i read on here that if it was bricked, only the power light would be on. On mine the power, enet, send and receive lights are all on so im confused. Any ideas anyone? Cheers
|
|
|
|
|
|
#3 (permalink) |
|
Senior Member
Join Date: Apr 2008
Posts: 129
Thanks: 6
Thanked 6 Times in 6 Posts
|
Cheers Lee i will reflash Haxorware again and see if it makes a difference.
Anyone got any idea why i would be getting the ''your modem does not have a valid ip configuration'' message? This has been happening since Wednesday. |
|
|
|
|
|
#5 (permalink) |
|
Cable Animal
Join Date: Dec 2008
Location: The Capital Of Yorkshire
Posts: 1,673
Thanks: 163
Thanked 451 Times in 350 Posts
|
It's not the flash mate, have you set you static IP to 192.168.100.10 & 192.168.100.1?
__________________
If at first you don't succeed.......flash and flash again! |
|
|
|
|
|
#6 (permalink) |
|
Senior Member
Join Date: Apr 2008
Posts: 129
Thanks: 6
Thanked 6 Times in 6 Posts
|
Just tried that m8, didnt work. Doing exactly the same thing !
Went funny the other day when had Infinate installed and flashing Hax made no difference so i think its something else other than the firmware. No matter what i put in GUI, always the same error ! |
|
|
|
|
|
#7 (permalink) | |
|
Senior Member
Join Date: Nov 2008
Location: Telewest
Posts: 636
Thanks: 70
Thanked 115 Times in 91 Posts
|
Quote:
have a read through this guide pal Haxor to Sync Guide. may be able to help.its more than likely a setting you put in wrong.
__________________
All info supplied by me is for educational and hypothetical purposes ONLY. |
|
|
|
|
|
|
#8 (permalink) |
|
Junior Member
Join Date: Mar 2009
Posts: 20
Thanks: 0
Thanked 2 Times in 2 Posts
|
A modem gets "bricked" when there is no firmware on it, or the firmware is so corrupt that it won't run. On a 255, the only solution is to lift the TSOP chip and reprogram it externally - or replace the chip with one that has firmware on it already. If you can connect to the modem and reflash it, it's definitely not bricked.
Where are you getting the error "Your modem does not have a valid ip configuration" from? Mike |
|
|
|
|
|
#9 (permalink) |
|
Senior Member
Join Date: Apr 2008
Posts: 129
Thanks: 6
Thanked 6 Times in 6 Posts
|
Cheers@ Parricull, ive just looked through that guide m8 and went through the settings, rebooted and its just the same.
@ Micky I get this message when i plug the modem in. Im using Vista so i go control panel/ network and sharing centre an there, the globe on the right hand side would be blue if connected but its grey so i go View status, diagnose, brings up Automatically get new ip settings, your network adapter does not have a valid ip configuration (this is new) and reset the network adapter. Whatever i choose, it always brings back the same options after refresh. This has only been happening since Wednesday and I hadnt touched any internet settings for weeks, it was just like that when i turned on the PC ! |
|
|
|
|
|
#10 (permalink) |
|
Junior Member
Join Date: Mar 2009
Posts: 20
Thanks: 0
Thanked 2 Times in 2 Posts
|
OK, then if it was my modem I'd assign a static IP to my computer, 192.168.100.10. Then I'd see if I could access the modem status page on http://192.168.100.1
Assuming I can, I'd change the Mac address of my Nic and the modem, then reset my IP to dynamic and see what happens... Mick |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Is my modem bricked? | mtb | Cable Modems | 3 | 08-02-09 12:39 PM |
| help quick please ambit 255 | anndy1972 | Cable Modems | 3 | 31-12-08 05:46 PM |
| i put haxor over infinite - did i brick it ambit 255 | mowax | Cable Modems | 4 | 14-12-08 03:05 PM |
| bricked me 200 lol | anndy1972 | Cable Modems | 5 | 28-11-08 09:08 PM |
| LinkBack |
LinkBack URL |
About LinkBacks |
| Bookmark & Share |
Digg this Thread! |
Add Thread to del.icio.us |
Bookmark in Technorati |
Tweet this thread |
