ambit 250/255 testing

[toolzkit]

Originally Posted by toolzkit

Ambit250/255 settings
change your Annex mode to DOCSIS you will find this in your Frequency settings
also make sure your Baseline Privacy is set to BPI+(Docsis1.1)
Tftp Enforce Bypass : ticked in General settings
using 2mbit mac looks stable

these settings work so far in leic
been online for 30mins but Im not going to hold my breath lol

top man lee-ds now I have two that work with BPI+

above post edit should be: BPI+(Docsis1.0)

[toolzkit]

been play with telnet for a few days lookin in the logs from my sb100i and wondering why that could stay online with no problems what so ever, when my ambit250 gets kicked after five minutes.

Think its sorted fingersX sb5100i log

CM/NonVol/CM DOCSIS NonVol> show

Instance: CM DOCSIS NonVol Settings (0x8074b8b8)

+---------------------------+
| CM DOCSIS NonVol Settings |
+---------------------------+
Magic Number = 0xd0c20100 '....'
Version (Permanent) = 0.2
Version (Dynamic) = 0.3
Is Default (Permanent) = false
Is Default (Dynamic) = false
DOCSIS Cable Modem Permanent NonVol Settings:
Scan Single DsChan Enabled = false
BPI Enabled = false
Concatenation Enabled = true
Fragmentation Enabled = true
PHS Enabled = true
IGMP Enabled = true
Rate Shaping Enabled = true
DOCSIS 1.1 Features Enabled = true
DHCP Enabled = true
Time Of Day Enabled = true
Config File TFTP Enabled = true
Canned Registration Enabled = false
One-line RNG-RSP Enabled = false
Advanced PHY Enabled = false
DOCSIS 2.0 Hack for 1.x CMTS = false
BPI23 (secure s/w dload) Enabled = true
Optimized Initial Ranging Enabled = true
Force Config File Enabled = false
AckCel technology Enabled = true
Upstream Queues Enabled = 0 (all queues can be used)
BPI Version = 1
Disabled DOCSIS Timers = 0x0 ({None})
Concatenation Threshold = 2 packets
Rate Shaping Time Interval = 2 seconds
TFTP Retry Timeout = 20 seconds
IP Stack Number = 1
Max UGS Queue Depth = 3 packets
Max Concat Packets = 64 packets
If DHCP is not enabled, then the following settings will be used:
DOCSIS Cable Modem Dynamic NonVol Settings:
Downstream Frequency = 402750000 hz
Upstream Channel = 4
Upstream Power = 112 quarter dBmV (28.0 dBmV)
Docsis10IgmpSupportEnabled = true
Docsis10IgmpMulticastPromiscEnabled = false
Startup Target DsFreq = 0 hz
Startup Target UsChannel = 0
Startup Target Context = 0

CM/NonVol/CM DOCSIS NonVol>

I changed my ambit250 bpi version to this in telnet and left annex to both & Baseline Privacy disabled, but now whatever I sniff with DHCP Sniffer-0.2.3.91b the macs I use are hit and miss even with brutforce on? think the configs have changed as well.

edit:
and after a modem reboot without changing pc nic mac it takes longer than usual to reconnect, but it connects ok

[toolzkit]

Just had to copy my pc nic mac over to my 360 to get it to signin!!! cheeky :P

[cockneysean]

You can change the MAC on a 360? Cool.

[toolzkit]

hell yeah!