No Sound ---> No Picture --> PEAA - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

shamkhan786 · 19-04-09, 12:09 AM

Hey Guyz,

I'm not a complete novice but i've been having an issue with my box for a couple of days.
It first started with a power surge which resulted in no sound (hissing sound). I powered it on and off a few times and then I got no picture (made things worse). Then I left it for the nite and the next morning, there was PEAA displayed on the display.

Now then, the PEAA is only displayed if I try connecting via SCART, if i connect through COAX and tune the channel, i jst get a gray screen, with no menus or anything, jst a blank gray screen.

I've read about C14 caps so decided to replace the PSU...no luck.
I've reset to factory settings without the screen, this was done by following one of the other forums where you enter the pin then hit the menu button etc etc. I know the reset has been applied as before i used to get channel numbers on diaplay but now i get 0000.

I then re-installed the firmware, tried both the April and November firmware and still no luck.
After all this I still get PEAA with SCART and 0000 with COAX.

Any ideas guyz??

Any advice would be appreciated.

MorriSoft · 19-04-09, 12:27 AM

Quote:

Originally Posted by shamkhan786

Hey Guyz,

I'm not a complete novice but i've been having an issue with my box for a couple of days.
It first started with a power surge which resulted in no sound (hissing sound). I powered it on and off a few times and then I got no picture (made things worse). Then I left it for the nite and the next morning, there was PEAA displayed on the display.

Now then, the PEAA is only displayed if I try connecting via SCART, if i connect through COAX and tune the channel, i jst get a gray screen, with no menus or anything, jst a blank gray screen.

I've read about C14 caps so decided to replace the PSU...no luck.
I've reset to factory settings without the screen, this was done by following one of the other forums where you enter the pin then hit the menu button etc etc. I know the reset has been applied as before i used to get channel numbers on diaplay but now i get 0000.

I then re-installed the firmware, tried both the April and November firmware and still no luck.
After all this I still get PEAA with SCART and 0000 with COAX.

Any ideas guyz??

Any advice would be appreciated.

Perhaps a little more information? You don't mention which box it is, the model no?

shamkhan786 · 19-04-09, 01:12 AM

Sorry, My BAD.
It's a Eurovox Max-V 2008 (Black)

Thanks

shamkhan786 · 19-04-09, 04:08 PM

Any advice at all?? Really seem to be getin stuck with this

smoggy · 19-04-09, 04:37 PM

Quote:

Originally Posted by shamkhan786

Any advice at all?? Really seem to be getin stuck with this

have a read of this post and see if it helps PEAA error max 08 possible workaround

shamkhan786 · 19-04-09, 07:36 PM

Ok, i think ive tried everythin but to JTAG, will do that tomrw, thanks for the advice so far, will post an update soon,

Thanks

smoggy · 19-04-09, 08:05 PM

Have you tried putting a cdf file for your area on to the box, (you never know and nothing to lose)

19-04-09, 12:09 AM	#1 (permalink)
shamkhan786 Junior Member Join Date: Jan 2009 Posts: 22 Thanks: 0 Thanked 0 Times in 0 Posts	No Sound ---> No Picture --> PEAA Hey Guyz, I'm not a complete novice but i've been having an issue with my box for a couple of days. It first started with a power surge which resulted in no sound (hissing sound). I powered it on and off a few times and then I got no picture (made things worse). Then I left it for the nite and the next morning, there was PEAA displayed on the display. Now then, the PEAA is only displayed if I try connecting via SCART, if i connect through COAX and tune the channel, i jst get a gray screen, with no menus or anything, jst a blank gray screen. I've read about C14 caps so decided to replace the PSU...no luck. I've reset to factory settings without the screen, this was done by following one of the other forums where you enter the pin then hit the menu button etc etc. I know the reset has been applied as before i used to get channel numbers on diaplay but now i get 0000. I then re-installed the firmware, tried both the April and November firmware and still no luck. After all this I still get PEAA with SCART and 0000 with COAX. Any ideas guyz?? Any advice would be appreciated.

19-04-09, 01:12 AM	#3 (permalink)
shamkhan786 Junior Member Join Date: Jan 2009 Posts: 22 Thanks: 0 Thanked 0 Times in 0 Posts	Re: No Sound ---> No Picture --> PEAA Sorry, My BAD. It's a Eurovox Max-V 2008 (Black) Thanks

19-04-09, 04:08 PM	#4 (permalink)
shamkhan786 Junior Member Join Date: Jan 2009 Posts: 22 Thanks: 0 Thanked 0 Times in 0 Posts	Re: No Sound ---> No Picture --> PEAA Any advice at all?? Really seem to be getin stuck with this

19-04-09, 07:36 PM	#6 (permalink)
shamkhan786 Junior Member Join Date: Jan 2009 Posts: 22 Thanks: 0 Thanked 0 Times in 0 Posts	Re: No Sound ---> No Picture --> PEAA Ok, i think ive tried everythin but to JTAG, will do that tomrw, thanks for the advice so far, will post an update soon, Thanks

19-04-09, 08:05 PM	#7 (permalink)
smoggy Senior Member Join Date: Apr 2008 Location: North East England Posts: 2,757 Thanks: 238 Thanked 881 Times in 791 Posts	Re: No Sound ---> No Picture --> PEAA Have you tried putting a cdf file for your area on to the box, (you never know and nothing to lose)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new starview 4 keeps loosing picture but sound stays on ??	richiem	Starview	4	15-12-08 11:36 PM
Sound no picture Starview USB	weedie	Starview	1	30-11-08 08:21 PM
Eurovox500 - Picture quality and Sound	ravi2001	Eurovox	3	01-10-08 07:09 PM
Distorted picture and jumpy sound PLEASE HELP!	jental7	Eurovox	5	28-11-07 11:10 AM
Only sound, no picture when changing channels on a DBOX 2	ashfaqrasul	Eurovox	4	04-11-06 10:07 PM