Stuck on "ON"

jambutty · 21-05-09, 11:39 PM

OK, it's gota be the second board (biger board) No chance of repairing this board, just take a look at all the components on this and how small some of the chips are, even if you were fluent in repairing, yer could never repair this one becuase these boards are made by robot tech, so havin' said this if no psu issue then this board is impossable to repair, yer better off takin't the psu out for a spare and buying a new KV.
Alan AKA jambutty.

lucid · 23-05-09, 06:28 PM

Leave it unplugged for 10-15 minutes then power up again, that often solves it.

yusuf_gaz · 23-05-09, 08:23 PM

Quote:

Originally Posted by lucid

Leave it unplugged for 10-15 minutes then power up again, that often solves it.

Hi

On this partucular box that dont work tried it many times even swapped psu from a working box still same.

Regards

lucid · 23-05-09, 11:42 PM

worth a try though a friends dis the same after several plugging in and out it worked again, if flashed with power off/on method it got stuck but was ok with red button method.

yusuf_gaz · 23-05-09, 11:47 PM

Quote:

Originally Posted by lucid

worth a try though a friends dis the same after several plugging in and out it worked again, if flashed with power off/on method it got stuck but was ok with red button method.

Hi

Yeh worth a go and I did try it a fair few times it just dont want to happen. The thing is it flashes fine and as soon as it finishes promptly goes and sits back to "on". Even tried to flash to earlier firmware but still same.

Regards

jambutty · 29-05-09, 12:18 AM

Yusuf,

I got your psu on Thursday.

I checked the caps you replaced and all ok, tested all diodes and they are spot on and ok.

Located 2 shorted caps, replaced them and psu now perfect and firing up.

yusuf_gaz · 29-05-09, 10:32 PM

Hi Alan

Thanks for that much appreciated.

Regards

ellen1 · 14-08-09, 06:46 PM

hi i am having same problemcan anyone help me with this

jambutty · 15-08-09, 01:17 AM

Replace Diode 7 on psu, this is deffo a fault with this syndrome.
Jam

ellen1 · 15-08-09, 11:05 AM

i went to maplins they didnt now what i was on about.

any chanceyou havethe part number mate

thanks

21-05-09, 11:39 PM	#11 (permalink)
jambutty Senior Member Join Date: May 2007 Location: Oldham Posts: 783 Thanks: 366 Thanked 207 Times in 151 Posts	Re: Stuck on "ON" OK, it's gota be the second board (biger board) No chance of repairing this board, just take a look at all the components on this and how small some of the chips are, even if you were fluent in repairing, yer could never repair this one becuase these boards are made by robot tech, so havin' said this if no psu issue then this board is impossable to repair, yer better off takin't the psu out for a spare and buying a new KV. Alan AKA jambutty. Last edited by jambutty; 21-05-09 at 11:44 PM.

23-05-09, 06:28 PM	#12 (permalink)
lucid Large Member Join Date: Aug 2008 Posts: 12 Thanks: 0 Thanked 2 Times in 2 Posts	Re: Stuck on "ON" Leave it unplugged for 10-15 minutes then power up again, that often solves it.

23-05-09, 11:42 PM	#14 (permalink)
lucid Large Member Join Date: Aug 2008 Posts: 12 Thanks: 0 Thanked 2 Times in 2 Posts	Re: Stuck on "ON" worth a try though a friends dis the same after several plugging in and out it worked again, if flashed with power off/on method it got stuck but was ok with red button method.

29-05-09, 12:18 AM	#16 (permalink)
jambutty Senior Member Join Date: May 2007 Location: Oldham Posts: 783 Thanks: 366 Thanked 207 Times in 151 Posts	Re: Stuck on "ON" Yusuf, I got your psu on Thursday. I checked the caps you replaced and all ok, tested all diodes and they are spot on and ok. Located 2 shorted caps, replaced them and psu now perfect and firing up.

29-05-09, 10:32 PM	#17 (permalink)
yusuf_gaz Senior Member Join Date: Sep 2008 Posts: 1,764 Thanks: 62 Thanked 424 Times in 397 Posts	Re: Stuck on "ON" Hi Alan Thanks for that much appreciated. Regards


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

14-08-09, 06:46 PM	#18 (permalink)
ellen1 Member Join Date: Sep 2008 Posts: 36 Thanks: 9 Thanked 1 Time in 1 Post	Re: Stuck on "ON" hi i am having same problemcan anyone help me with this

15-08-09, 01:17 AM	#19 (permalink)
jambutty Senior Member Join Date: May 2007 Location: Oldham Posts: 783 Thanks: 366 Thanked 207 Times in 151 Posts	Re: Stuck on "ON" Replace Diode 7 on psu, this is deffo a fault with this syndrome. Jam Last edited by jambutty; 15-08-09 at 01:19 AM. Reason: miiseed data and ssspelin

15-08-09, 11:05 AM	#20 (permalink)
ellen1 Member Join Date: Sep 2008 Posts: 36 Thanks: 9 Thanked 1 Time in 1 Post	Re: Stuck on "ON" i went to maplins they didnt now what i was on about. any chanceyou havethe part number mate thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pace 4001 Stuck in Tune	kimigonzales	Other Cable Boxes	9	29-03-09 12:22 AM
Stuck in Err5	Berry1	Cable TV Chat	12	03-11-08 08:46 PM
Pace 2000 stuck ap:52 - net id keeps changing	dannyt0812	Other Cable Boxes	3	31-10-08 11:49 PM
Help Stuck Glithching Rom 11	jamie1984	Cable TV Chat	2	17-12-07 07:24 PM
Eurovox Max V3 Stuck in Standby	Brutis	Eurovox	4	25-09-07 08:36 AM