Easy Guide to updating the A700c and a750

[ronster]

A simple guide for updating your kryptview

1.Without power connected connect your Kryptview to the pc seriel port using a null modem cable

2.Open the loader application

3.Click on the big green "download tab" or you can click:tools-Si-Si send

4.Click "open" and locate the firmware that you have previously saved on your PC

5.Click the "start" button and immediately plug the box in OR on the A750 flick the power switch on the back of box and the download will begin
If your using a usb-seriel converter and your getting error messages or "download not requested" have a read of this tut by satsmo to configure it correctly http://www.techwatch.co.uk/forums/199475-post13.html or get a seriel pci card they're a couple of pound more than these crap usb converters

When the download is complete reconnect the box to TV and cable feed.

Delete all channel data and do a factory reset

Fresh Scan

1.Menu-Iistallation-Automatic search

2.Select your ex provider ex CW,NTL,TW ect.A list of network id's will appear so select the one that applies to you,if your net id isnt there press the RED button to scan entire network.

3.Once the scan is complete and you have exited the menu put the box in standby (power search mode) for 5-10 mins so it arranges the channels.

4.ENJOY

[HappyH]

Nice one ronster. If this gets 'Sticky'd' we can direct all enquiries here!!
HH.

[omager0]

Hi ronster - can you advise wher I get the loader application for the bin file?
thanks in advance.
Ger

[ronster]

Here Thinking of getting this.

[lucid]

3.Click on the big green "download tab" or you can click:tools-Si-Si send

si files are channel data files, i think it should say code-code send for firmware. Si send for uploading channel data to the receiver.

[ronster]

thanks for pointing that out but im unable to edit it now!