Latest patch screwed my TM 5400?!!!! - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

soggybottomboy · 29-04-09, 09:44 PM

I need urgent help!!!!!

I tried to load the latest MAGIC patch 5400CI_5600CI_SUPER_126p_17-04-2009, I started according to the manual written by MrVEE: copied patch and softcam to FAT32 USB Key. Went to USB / Data Transfer and choose the patch. It started loading, and then the STB went off. I thought it was a part of the proccess. However, I cannot pwer it back on. When I try to power it on, the led lights go briefly from left to right, and that's it. Nothing else.

Is there any chance I could bring it back to live? It's a brand new box.

PLEASE HELP?

Regards.

Robbo · 29-04-09, 09:46 PM

Yes, go back to a proper technomate patch, load it using a null modem cable, and the TM Loader.

Start the loader with the box OFF, turn it on immediately after the loader has started.

This should help,

though it is an older model, but gives you the general idea

:-
Patching your Technomate 1000 series

soggybottomboy · 29-04-09, 10:26 PM

Robbo,

Thanks a lot for that.

I will do that as soon as I get a null modem cradle.

I'll let you know.

Again, much appreciated.

Regards,

lincsat · 29-04-09, 11:20 PM

It's recommended to do the first flash on a new box by serial cable rather than USB, also make sure you have the correct flash - ie Super or non-super.

nillhouse · 01-05-09, 09:15 PM

Quote:

Originally Posted by soggybottomboy

I need urgent help!!!!!

I tried to load the latest MAGIC patch 5400CI_5600CI_SUPER_126p_17-04-2009, I started according to the manual written by MrVEE: copied patch and softcam to FAT32 USB Key. Went to USB / Data Transfer and choose the patch. It started loading, and then the STB went off. I thought it was a part of the proccess. However, I cannot pwer it back on. When I try to power it on, the led lights go briefly from left to right, and that's it. Nothing else.

Is there any chance I could bring it back to live? It's a brand new box.

PLEASE HELP?

Regards.

Sorry if Im hijacking this thread, will move if needs be.
I've had exactly the same problem, but with the latest TECHNOMATE patch TM5400CI_5600CI_SUPER_111_06-03-2009.stb. Same problems with regards to not powering back on and 4 green lights going left to right.
Ive tried the "fix", but in my case its not working, I was at the PC a good hour trying it, don't suppose you've got any more ideas?
Ive only had the box 2 days, and this is my first attempt at this satellite hobby! And Im not ready to give in yet!
Cheers

Robbo · 01-05-09, 09:47 PM

What exactly did you do, and what happened when you tried it?

I know it works on the TM1000 models as I have stuffed mine a number of times, and it always came back.

nillhouse · 02-05-09, 12:59 PM

Hi Robbo, thanks for taking an interest,

ok..
Gear

Technomate 5400CI+ USB Super+ Receiver

1. I first downloaded the latest patch, (Techanote-TM5400CI_5600CI_SUPER_111_06-03-2009.stb)
2. I then used the USB Method to load the .stb onto the receiver.
The receiver went through the motions of updating, and switched off, (I guess into standby),
3. I left it for a couple of minutes, (went to make a cup of tea), came back in and went to switch it back on with the Standby button on the remote. Nothing.
4. I then tried switching the receiver off/on with power switch at the back. Nothing, bar 4 green lights on the front panel moving left to right.
5. Panicked!
6. Read through nanochickin's thread for recovering TM1000.
7. Went to Maplins and purchased a Null Modem Cable.
8. Followed instructions to the letter, using Receiver specific software, and patch.
9. The software just wouldn't recognise the box, like I mentioned, I was trying a good hour.
a. Tried pushing connect and switching on at the same time.
b. Tried pushing connect, then switching on shortly afterwards.
c. Tried pushing connect, waiting for the green lights to appear, then switching on.
d. Tried switching on, then pushing connect.
You get the picture, lol, I was quite thorough.

Ive got a feeling Ive got a door stop.

Thanks for looking chap! Tom

betas · 02-05-09, 04:12 PM

best to upload your channel list and keep it on USB or computer just in case.

radtv · 02-05-09, 05:36 PM

Are you sure you bought the correct RS232 cable from Maplins as I made a mistake once and got one but it was not a Null modem type and would not talk to the receiver?

nanochickin · 02-05-09, 05:52 PM

Best ones are the ones off ebay for 99p

I thought this would be the most appropriate thread to use also

How to recover your TM1000 after a failed update

Nano

29-04-09, 09:44 PM	#1 (permalink)
soggybottomboy Junior Member Join Date: Apr 2009 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	Latest patch screwed my TM 5400?!!!! I need urgent help!!!!! I tried to load the latest MAGIC patch 5400CI_5600CI_SUPER_126p_17-04-2009, I started according to the manual written by MrVEE: copied patch and softcam to FAT32 USB Key. Went to USB / Data Transfer and choose the patch. It started loading, and then the STB went off. I thought it was a part of the proccess. However, I cannot pwer it back on. When I try to power it on, the led lights go briefly from left to right, and that's it. Nothing else. Is there any chance I could bring it back to live? It's a brand new box. PLEASE HELP? Regards.

29-04-09, 09:46 PM	#2 (permalink)
Robbo Satellite mad Join Date: Jul 2007 Location: Kent Posts: 9,374 Thanks: 97 Thanked 1,981 Times in 1,603 Posts	Re: Latest patch screwed my TM 5400?!!!! Yes, go back to a proper technomate patch, load it using a null modem cable, and the TM Loader. Start the loader with the box OFF, turn it on immediately after the loader has started. This should help, though it is an older model, but gives you the general idea :- Patching your Technomate 1000 series __________________ القمر الصناعي هو أفضل TM600 linux,TM6800HD,TM5200,TM1000,TM2200 motor, Triax TD110 dish. Electronics Engineer and satellite installer.MBC Satellites Last edited by Robbo; 29-04-09 at 09:51 PM.

29-04-09, 10:26 PM	#3 (permalink)
soggybottomboy Junior Member Join Date: Apr 2009 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Latest patch screwed my TM 5400?!!!! Robbo, Thanks a lot for that. I will do that as soon as I get a null modem cradle. I'll let you know. Again, much appreciated. Regards,

29-04-09, 11:20 PM	#4 (permalink)
lincsat Super-Dooper Moderator Join Date: Sep 2005 Location: In front of the PC Posts: 6,003 Thanks: 8 Thanked 2,580 Times in 667 Posts	Re: Latest patch screwed my TM 5400?!!!! It's recommended to do the first flash on a new box by serial cable rather than USB, also make sure you have the correct flash - ie Super or non-super. __________________ Blade7000 & DM800Pro/SE in Stock, Linux Sat boxes from £52.25, SkyboxF3 under £60. Kryptview £123.50 & SV6 under £72 with Members Discount - Lincsat's Nick-Nacks (Shop) Drivers Protest Union

01-05-09, 09:47 PM	#6 (permalink)
Robbo Satellite mad Join Date: Jul 2007 Location: Kent Posts: 9,374 Thanks: 97 Thanked 1,981 Times in 1,603 Posts	Re: Latest patch screwed my TM 5400?!!!! What exactly did you do, and what happened when you tried it? I know it works on the TM1000 models as I have stuffed mine a number of times, and it always came back. __________________ القمر الصناعي هو أفضل TM600 linux,TM6800HD,TM5200,TM1000,TM2200 motor, Triax TD110 dish. Electronics Engineer and satellite installer.MBC Satellites

02-05-09, 12:59 PM	#7 (permalink)
nillhouse Junior Member Join Date: Apr 2009 Location: Glastonbury, Somerset Posts: 10 Thanks: 8 Thanked 1 Time in 1 Post	Re: Latest patch screwed my TM 5400?!!!! Hi Robbo, thanks for taking an interest, ok.. Gear Technomate 5400CI+ USB Super+ Receiver 1. I first downloaded the latest patch, (Techanote-TM5400CI_5600CI_SUPER_111_06-03-2009.stb) 2. I then used the USB Method to load the .stb onto the receiver. The receiver went through the motions of updating, and switched off, (I guess into standby), 3. I left it for a couple of minutes, (went to make a cup of tea), came back in and went to switch it back on with the Standby button on the remote. Nothing. 4. I then tried switching the receiver off/on with power switch at the back. Nothing, bar 4 green lights on the front panel moving left to right. 5. Panicked! 6. Read through nanochickin's thread for recovering TM1000. 7. Went to Maplins and purchased a Null Modem Cable. 8. Followed instructions to the letter, using Receiver specific software, and patch. 9. The software just wouldn't recognise the box, like I mentioned, I was trying a good hour. a. Tried pushing connect and switching on at the same time. b. Tried pushing connect, then switching on shortly afterwards. c. Tried pushing connect, waiting for the green lights to appear, then switching on. d. Tried switching on, then pushing connect. You get the picture, lol, I was quite thorough. Ive got a feeling Ive got a door stop. Thanks for looking chap! Tom

02-05-09, 04:12 PM	#8 (permalink)
betas Member Join Date: Nov 2007 Posts: 48 Thanks: 7 Thanked 8 Times in 8 Posts	Re: Latest patch screwed my TM 5400?!!!! best to upload your channel list and keep it on USB or computer just in case.

02-05-09, 05:36 PM	#9 (permalink)
radtv Senior Member Join Date: Jul 2006 Posts: 2,739 Thanks: 90 Thanked 362 Times in 305 Posts	Re: Latest patch screwed my TM 5400?!!!! Are you sure you bought the correct RS232 cable from Maplins as I made a mistake once and got one but it was not a Null modem type and would not talk to the receiver? __________________ Before you buy contact or visit www.redappledigital.co.uk on 0800 612 5117. We try hard not to be beaten on price!

02-05-09, 05:52 PM	#10 (permalink)
nanochickin Retired Mod & Sat Guru Join Date: Aug 2006 Location: Wolverhampton Posts: 3,825 Thanks: 46 Thanked 338 Times in 270 Posts	Re: Latest patch screwed my TM 5400?!!!! Best ones are the ones off ebay for 99p I thought this would be the most appropriate thread to use also How to recover your TM1000 after a failed update Nano __________________ Sanity is nothing more than an excuse to be boring

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Please Post Latest Patch for Technomate 5200d	dahraf	Satellite Help	4	20-01-09 11:10 PM
Trying to patch 5400 ci	garylucy	Technomate	7	16-08-08 09:32 PM
Help! where can I download latest Darkman patch for Technomate CI1500+	tvmad	Technomate	41	19-12-07 06:27 PM
how easy is it to patch a technomate 5400	chazkelly1985	Satellite Help	5	10-12-07 07:55 PM
Latest Patch for 1000 Series Fix Multivizion	Realist	Technomate	14	27-03-06 01:52 PM