help with webstar 2100

[m r mawdsley]

hi all can someone help me out with a webstar 2100 i av just been given this modem off a friend it as not been flashed with any program i av not done these before so i dont no were 2 start with this i av done 250 255 but 4 the life off me cannot do this one can anybody tell me witch lead i need and wat program also looked through tuts but cannot find anything 2 help will my 233 lead that i use on the250 255 do the job i opened the webstar but the lead 4 the 250 seems wider for the webstar plz help would like 2 thank all who respond cheer

[blue nose]

There is one I have used on wizmods just search...What is the best tut for a Webstar 2100. Its quite good. You do use the 232.

[m r mawdsley]

thanx blue nose my 232 connection lead seems wider the plug on the end does not fit on the webstar pins properly

[G77]

you'll ned to solder to the back of the pins,

make an adapter or something.

[m r mawdsley]

cheers g77 i made a lead up off a speaker with connections but the still seem2 b loose wat do i solder the pins r in the top off board i cut the white plastic off were the pins r thinking that i would b able 2 connect lead that way but still no joy were is the program i need cheers

[blue nose]

I used haxoware rev31 I think not sure if its in the downloads.

[cockneysean]

Originally Posted by m r mawdsley

cheers g77 i made a lead up off a speaker with connections but the still seem2 b loose wat do i solder the pins r in the top off board i cut the white plastic off were the pins r thinking that i would b able 2 connect lead that way but still no joy were is the program i need cheers

You need a console cable which has the correct connection, or take the plug off of the cable and solder the wires directly to the pins.

[madpad]

i use a connector i found off an old mother board i cut down each corner of the white plastic with a stanley knife and it breaks away with your finger easily