Is It a TSOP lift?

[/24]

I tried to flash my ambit 250 using fitzs 2mb dump i selected to store the image at sector 0 and now when I boot the modem the output in h/t is
Signature: 3349


Broadcom BootLoader Version: 2.1.6d release Gnu
Build Date: May 10 2004
Build Time: 19:06:46


******************** CRASH ********************

EXCEPTION TYPE: GENERAL
R0/ZERO=00000000 R1/AT =81f8fa70 R2/V0 =f0000000 R3/V1 =ffffffce
R4/A0 =00000007 R5/A1 =00200000 R6/A2 =04000007 R7/A3 =00000000
R8/T0 =04000007 R9/T1 =0000000c R10/T2 =04000007 R11/T3 =00000036
R12/T4 =00000000 R13/T5 =00000000 R14/T6 =00000000 R15/T7 =0000006e
R16/S0 =81f85f18 R17/S1 =8cc30000 R18/S2 =00000023 R19/S3 =00000006
R20/S4 =00000003 R21/S5 =00000000 R22/S6 =807ffdcc R23/S7 =00000000
R24/T8 =00001021 R25/T9 =00000001 R26/K0 =deaddead R27/K1 =deaddead
R28/GP =fffffdff R29/SP =807ffdc0 R30/FP =00000000 R31/RA =81f85d80

pc : 0x81f85f18 sr : 0x00000002
cause: 0x00008008 addr: 0x04000007

the only light on is the power light although if i connect an ethernet cable then the ethernet light comes on and if i ping the board address although it doesnt reply the ethernet light flashes. Is this a TSOP lift?

[5av1dg312]

i got one like that....

so i think so mate i cant connect to it in anyway unless there is another way? i get that in hyper like you but i fooked up when it said store parameters to flash i put Y when flashing. tryed console unlocker but nothing and softjtag.

duhhhh ive bricked 3 or 4 modems since all this but fitzs 0.3 fix working on a difffrent 250 now which i flashed right and been going for 13 hours with one restart through the night. i restarted it this morning and it came on straight away i been ok for last hour n half

heres my log

Event Log
2009-05-02 08:50:48InformationM569.1Standby mode disabled
2009-05-02 08:50:48InformationI500.0Registration Completed
2009-05-02 08:50:48InformationD507.0Retrieved Time....... SUCCESS
2009-05-02 08:50:48InformationD509.0Retrieved TFTP Config cmreg-mota4100-rts98.cm SUCCESS
1970-01-01 00:00:18ErrorD004.3ToD request sent- No Response received
1970-01-01 00:00:18InformationD511.0Retrieved DHCP .......... SUCCESS
1970-01-01 00:00:18CriticalD003.0DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:12InformationT500.0Acquired Upstream .......... SUCCESS
1970-01-01 00:00:11InformationT501.0Acquired Downstream (402750000 Hz)........ SUCCESS
1970-01-01 00:00:06NoticeM571.1Ethernet link up - ready to pass packets
1970-01-01 00:01:43NoticeM573.0Modem Is Shutting Down and Rebooting...
1970-01-01 00:01:43CriticalResetting the cable modem due to docsDevResetNow

[fitz]

Originally Posted by /24

I tried to flash my ambit 250 using fitzs 2mb dump i selected to store the image at sector 0 and now when I boot the modem the output in h/t is
Signature: 3349


Broadcom BootLoader Version: 2.1.6d release Gnu
Build Date: May 10 2004
Build Time: 19:06:46


******************** CRASH ********************

EXCEPTION TYPE: GENERAL
R0/ZERO=00000000 R1/AT =81f8fa70 R2/V0 =f0000000 R3/V1 =ffffffce
R4/A0 =00000007 R5/A1 =00200000 R6/A2 =04000007 R7/A3 =00000000
R8/T0 =04000007 R9/T1 =0000000c R10/T2 =04000007 R11/T3 =00000036
R12/T4 =00000000 R13/T5 =00000000 R14/T6 =00000000 R15/T7 =0000006e
R16/S0 =81f85f18 R17/S1 =8cc30000 R18/S2 =00000023 R19/S3 =00000006
R20/S4 =00000003 R21/S5 =00000000 R22/S6 =807ffdcc R23/S7 =00000000
R24/T8 =00001021 R25/T9 =00000001 R26/K0 =deaddead R27/K1 =deaddead
R28/GP =fffffdff R29/SP =807ffdc0 R30/FP =00000000 R31/RA =81f85d80

pc : 0x81f85f18 sr : 0x00000002
cause: 0x00008008 addr: 0x04000007

the only light on is the power light although if i connect an ethernet cable then the ethernet light comes on and if i ping the board address although it doesnt reply the ethernet light flashes. Is this a TSOP lift?

Looks like something went wrong while it was storing the flash.

Yeah tsop job. I've got one too from messing with the BL

cheers, fitz

[5av1dg312]

confirmation.... thankyou fitz