Haxoware Event Log

[Smurf]

My modem went off earlier and this was in the log anyone know what this error is?

2009-05-05 20:48:08CriticalD001.0
DHCP FAILED - Discover sent, no offer received
2009-05-05 20:47:54CriticalR002.0
No Ranging Response received - T3 time-out (US 2)
2009-05-05 20:47:47 NoticeM572.0Rng Rsp Abort Status - Reinitialize MAC...
2009-05-05 20:47:47 CriticalR007.0Unicast Ranging Received Abort Response - Re- initializing MAC
2009-05-05 20:39:05 NoticeI401.0TLV-11 - unrecognized OID
2009-05-05 20:39:00 ErrorD004.3ToD request sent- No Response received

[cockneysean]

All I can see is you are not getting an IP address the modem is rebooting.

What happened leading up to this? It may be a new MAC you need. Did the modem just stop working or is it a new set up?

[fitz]

@ smurf ..forced config when area has gone dynamic > no dhcp offer > mac blacklisted

[Smurf]

Thanks fitz im using ur fix and so far fingers crossed in Pure area is working flawlessly for the last 2 days. I was forcing the nat config when i got that error but still forcing it using a 00:02 Mac. Before ur fix was getting booted off every 2 min or sometimes it would last 30min before i got booted off. Good Work Thanks alot for that fitz ur a genius.

[cockneysean]

Originally Posted by fitz

@ smurf ..forced config when area has gone dynamic > no dhcp offer > mac blacklisted

Fitz, so they can tell if you are forcing even though you have TFTP enforce bypass enabled?

If so, then what is the point of the bypass? I thought the bypass basically made the cmts think that you had accepted the served config and all was legit?

[lee-ds]

From what I gather, config file names change (dynamic) (the contents of the file do not).

[fitz]

Originally Posted by cockneysean

Fitz, so they can tell if you are forcing even though you have TFTP enforce bypass enabled?

If so, then what is the point of the bypass? I thought the bypass basically made the cmts think that you had accepted the served config and all was legit?

If you watch your telnet session output while you boot now, i think you'll see that bypass no longer works...it just times out

cheers, fitz

[fitz]

Originally Posted by lee-ds

From what I gather, config file names change (dynamic) (the contents of the file do not).

Dunno, my area's still static. If they've set it up properly, the config files will contain a 'shared secret' value, which is generated upon each tftp request.

In order to register, the CM must return the value of the secret to the CMTS during reg.

no match = no reg

cheers, fitz

[Smurf]

Alot of my 00:02 macs dont work anymore just go straight to VM reg page which is weird never used to happen like that. Whats the reason for that i think its happening with most my macs and im running outta macs now and get hardly any macs with DHCP sniffer?

[fitz]

Originally Posted by Smurf

Alot of my 00:02 macs dont work anymore just go straight to VM reg page which is weird never used to happen like that. Whats the reason for that i think its happening with most my macs and im running outta macs now and get hardly any macs with DHCP sniffer?

spoof your LAN adapter's MAC whenever trying a new modem MAC....yours is blacklisted

cheers, fitz