TM1000 Series Patching, Softcam, Key Edit Complete Video Tutorials

[Realist]

VIDEO'S ARE NOW ATTACHED TO THIS 1ST POST.
ALSO ADDED FILES TO THE DOWNLOADS SECTION.


These video tutorials are intended for newbie’s or members who need a little extra help in understanding how to patch and update the Technomate 1000 series receivers.
Includes 1000D/CI, 1500CI, 1600CI and the super range.

Always check and download the latest’s Patch and loader software for your model as well as the latest Softcam Key files. The files on the video clips may be out of date by the time this was completed/posted.

The Technomate Darnman's Patch and Loader is found in this section (Technomate).
The Softcam files are on the Keys only section.
Please search before posting for help.

Use the buttons on your windows media player to pause the video if required.

Video tutorial available:

TM1000HowToPatch :
Most important part as it’s required before you can update keys to clear the channels .

TM1000HowToSoftcamLoader:
If your receiver is already patched and no newer patch is available then maybe updating the keys will clear the channels. Very good way of updating many providers in a few seconds.

TM1000CASkeyEditM :
If you only need to update one or two keys then it maybe quicker to enter the keys using the remote control.

TM1000CASMENUshortcut :
Same as the above but with a shortcut access to the CAS menu. Go to the channel you need to clear and press Mute then Exit on the remote control and it will jump into the right slot(s) for that provider. Please note that some providers like TPS will have more than one slot and you may need to use the Vol- & Vol+ buttons to select the right slot for that channel. The Keys ID (two digit numbers) should indicate if you are on the right slot.

What about the BISS MENU?
No video clip for this but it’s easy to edit. Just press Menu, System Information then press BISS Menu. The first 15 seconds of the TM1000CASkeyEdit shows you how to get there. Edit the keys as you would in the TM1000CASkeyEditM . It does not matter on what channel you are for editing the BISS menu.

SWITCHING THE PATCH OFF/ON
This is needed sometimes if you wish to use other CAM’s or Cards on the receiver:

Press Menu, System Information then enter 2004 on the remote. The CAS and BISS Menus will disappear. To enable the patch again just repeat the process.

Good luck.

NOTE: Do not even think of selling this on eBay. I will have it removed from any account. These video clips are the property of Jobusca of Alsat.

[larnerj]

where do i find the patch

[robbieremix]

Hi Ive Got A Tm 1500ci Is This The Same Procedure!many Thanks Rob

[Realist]

Yes it is M8

Laters

Originally Posted by robbieremix

Hi Ive Got A Tm 1500ci Is This The Same Procedure!many Thanks Rob

Hi thought I could be a leech but not so lucky.

No really hi all i a newbie

[tonybarradas]

hi hello me8 i have new chanel list but i cant pot in her help plase
1000d 1000ci

[gugulica]

nice tools! realy!

[will-in-estoril]

Let's see how anewbie gets on!!

[steve_blackburn]

pleas let me see and thnx for a good job

[dominoc]

let's try it guys