Autoserve an OLD config file!!!!!

[G77]

Tested this now for 4 weeks. with spot on results!

If you've got Haxorware, upload an old (before all this hassle started) config file in the Autoserve bit.

DO NOT check DHCP bypass.

The modem gets its assigned config be it dynamic or not but just doesn't use it, it uses the one you've uploaded....

Acquire Downstream ChannelDoneObtain Upstream ParametersDoneUpstream RangingDoneEstablish IP ConnectivityDoneRetrieve Time of DayDoneNegotiate securityDoneReceive configurationDoneRegister connectionDoneCable modem statusOperational

HFC Parameters
Mode DHCP
IP Address**.**.***.***
Subnet 255.255.255.0
TFTP Server 10.137.***.*
TFTP Filename cmreg-ntlhm256-rts98.cm
ToD Server 62.254.**.***

Configuration file
Namecmreg-ntlhm256-rts22.cm
Size80 bytes
Compliance DOCSIS 1.0



Now because the old config files dont have all the new crap in them, it simply doesn't use it. e.g. CVC (i think) and the rest of it.

You will still need to do this one command...

cd nonvol
CD snmp
diag_disable_post_reg true

You can also disable the ToD if you like.

Now, I have just one little problem......

On certain modems (it appeares to be nothing to do with firmware or modem model) the lease between the modem and router/pc keeps being dropped. The telnet connection and/or Haxorware web GUI is still ok. It just seems to be the www access. This is resolved by doing a ipconfig release and ipconfig renew in dos or disabling and enabling the nic. If using a router, do the same with the internal web GUI.
This conectivity drop seems to be when the modem isn't being used and I think it may be something to do with the standby button thing Fitz has been working on. I think in his readme file with his fix he may have typo'd the command because i cant get it to work.
Any help on this last niggling problem will be much appreciated.

I do have the old config files stored if needed.

Good luck and please report back to let me know if this has worked for you.

This has been tested in C+W for the past 4 weeks using 298750000 as the freq.

The modems went off for a couple of hours yesterday while they sent an update out to their subbs but they came back on by themselves.

I have been using a 256 mac and an old config from a 256.

[MorriSoft]

Originally Posted by G77

Tested this now for 4 weeks. with spot on results!

If you've got Haxorware, upload an old (before all this hassle started) config file in the Autoserve bit.

DO NOT check DHCP bypass.

The modem gets its assigned config be it dynamic or not but just doesn't use it, it uses the one you've uploaded....

Acquire Downstream ChannelDoneObtain Upstream ParametersDoneUpstream RangingDoneEstablish IP ConnectivityDoneRetrieve Time of DayDoneNegotiate securityDoneReceive configurationDoneRegister connectionDoneCable modem statusOperational

HFC Parameters
Mode DHCP
IP Address**.**.***.***
Subnet 255.255.255.0
TFTP Server 10.137.***.*
TFTP Filename cmreg-ntlhm256-rts98.cm
ToD Server 62.254.**.***

Configuration file
Namecmreg-ntlhm256-rts22.cm
Size80 bytes
Compliance DOCSIS 1.0



Now because the old config files dont have all the new crap in them, it simply doesn't use it. e.g. CVC (i think) and the rest of it.

You will still need to do this one command...

cd nonvol
CD snmp
diag_disable_post_reg true

You can also disable the ToD if you like.

Now, I have just one little problem......

On certain modems (it appeares to be nothing to do with firmware or modem model) the lease between the modem and router/pc keeps being dropped. The telnet connection and/or Haxorware web GUI is still ok. It just seems to be the www access. This is resolved by doing a ipconfig release and ipconfig renew in dos or disabling and enabling the nic. If using a router, do the same with the internal web GUI.
This conectivity drop seems to be when the modem isn't being used and I think it may be something to do with the standby button thing Fitz has been working on. I think in his readme file with his fix he may have typo'd the command because i cant get it to work.
Any help on this last niggling problem will be much appreciated.

I do have the old config files stored if needed.

Good luck and please report back to let me know if this has worked for you.

This has been tested in C+W for the past 4 weeks using 298750000 as the freq.

The modems went off for a couple of hours yesterday while they sent an update out to their subbs but they came back on by themselves.

I have been using a 256 mac and an old config from a 256.

I will try this sometime today, g77 check your PMs matey, I'd like that config if you get chance please

I'll let you know how I get on pending your response.

[stokie mac]

Originally Posted by G77

Tested this now for 4 weeks. with spot on results!

If you've got Haxorware, upload an old (before all this hassle started) config file in the Autoserve bit.

DO NOT check DHCP bypass.

The modem gets its assigned config be it dynamic or not but just doesn't use it, it uses the one you've uploaded....

Acquire Downstream ChannelDoneObtain Upstream ParametersDoneUpstream RangingDoneEstablish IP ConnectivityDoneRetrieve Time of DayDoneNegotiate securityDoneReceive configurationDoneRegister connectionDoneCable modem statusOperational

HFC Parameters
Mode DHCP
IP Address**.**.***.***
Subnet 255.255.255.0
TFTP Server 10.137.***.*
TFTP Filename cmreg-ntlhm256-rts98.cm
ToD Server 62.254.**.***

Configuration file
Namecmreg-ntlhm256-rts22.cm
Size80 bytes
Compliance DOCSIS 1.0



Now because the old config files dont have all the new crap in them, it simply doesn't use it. e.g. CVC (i think) and the rest of it.

You will still need to do this one command...

cd nonvol
CD snmp
diag_disable_post_reg true

You can also disable the ToD if you like.

Now, I have just one little problem......

On certain modems (it appeares to be nothing to do with firmware or modem model) the lease between the modem and router/pc keeps being dropped. The telnet connection and/or Haxorware web GUI is still ok. It just seems to be the www access. This is resolved by doing a ipconfig release and ipconfig renew in dos or disabling and enabling the nic. If using a router, do the same with the internal web GUI.
This conectivity drop seems to be when the modem isn't being used and I think it may be something to do with the standby button thing Fitz has been working on. I think in his readme file with his fix he may have typo'd the command because i cant get it to work.
Any help on this last niggling problem will be much appreciated.

I do have the old config files stored if needed.

Good luck and please report back to let me know if this has worked for you.

This has been tested in C+W for the past 4 weeks using 298750000 as the freq.

The modems went off for a couple of hours yesterday while they sent an update out to their subbs but they came back on by themselves.

I have been using a 256 mac and an old config from a 256.

Ive sent you a pm aswell g mate..

[liamroe]

as i was on infinite before this i do not have any old configs so if this prooves to work it would be nice to see a folder on the modem downloads called old configs as alot of people had infinite so they dont have them either.
chears guys

[G77]

if people want the config file, you can pm me your email add and i'll send it on.

here are some screens that have been asked for.....

edit : if this proves to work, please can someone tell me how i go about getting a file in uploaded to downloads. thanks.

[stokie mac]

Ive noticed that you are on a different firmware to me im still on 1.0rc3
You havent got on your general settings:
CURRENT IP FILTERS STATUS : OPTIMIZED
Is that right??..
Also can i change my firmware to the same as yours by using ethernet or does it have to be max 232??..
Cheers..

[G77]

you can do it using ethernet easy, just go to haxorware.com or whatever it is and download the latest pack, then read the readme in the upgrade folder

[lee-ds]

I've uploaded a couple of configs here that should be old enough.

http://www.4 sha red.com/dir/7339488/a48df91f/sharing.html

take out the spaces^^^^

[G77]

tested and working?

[50pounds]

You will still need to do this one command...

cd nonvol
CD snmp
diag_disable_post_reg true

You can also disable the ToD if you like.


How can i do this in Hyperterminal? lol i have forgot :S