Help with Motorola Surfboard 5101e

[m r mawdsley]

Hi guys, Just wandering if anybody out there knew exactly what i need for modding a motorola surfboard 5101e modem. I have been reading up on this and struggling to get one up and running.

I have a blackkat lead and schwarze katz program but i have also been told i need a 2mb dump file and also do i have to put pin headers in for max 232/3 lead aswell as black kat to do this modem.

Any help would be much appreciated.

[g80878]

Originally Posted by m r mawdsley

Hi guys, Just wandering if anybody out there knew exactly what i need for modding a motorola surfboard 5101e modem. I have been reading up on this and struggling to get one up and running.

I have a blackkat lead and schwarze katz program but i have also been told i need a 2mb dump file and also do i have to put pin headers in for max 232/3 lead aswell as black kat to do this modem.

Any help would be much appreciated.

Download the latest haxorware from their site , plug blackcat cable in , open schwarze katz program , open flash tab , select wite all , point it in the direction of haxorware.bin file , wait 45mins ish , jobs a good un

[G77]

mr mawdsley, have mailed you a 2mb dump taken from my sb5101e and one especially for the intel chip

use toms jtag and it'll be done in a hour

[m r mawdsley]

Originally Posted by g80878

Download the latest haxorware from their site , plug blackcat cable in , open schwarze katz program , open flash tab , select wite all , point it in the direction of haxorware.bin file , wait 45mins ish , jobs a good un

hi tried it is way and now all i get is a single orange light it will not let me access 192.168.100.1 page and also when it came up verifying written data 0x150000 it failed 3 times and asked me to continue i said yes but still nothing. Is there something different i should be doing (it says fault address). Now it has failed again and came up error unable to verify data.

Its starting to wreck my head

[m r mawdsley]

Originally Posted by G77

mr mawdsley, have mailed you a 2mb dump taken from my sb5101e and one especially for the intel chip

use toms jtag and it'll be done in a hour

hi mate just trying your way now should i just use ldram flash and then program flash or is the a certain way i should be doing it

[G77]

ldram flash and program flash.

does blackcat recogniose the flash chip?

[m r mawdsley]

Originally Posted by G77

ldram flash and program flash.

does blackcat recogniose the flash chip?

Hi mate on toms jtagutility it has come up

Detect flash: intel 28f160c3b
read cfi data:
-protocol: intel
-flash size: 0x200000
-block 0 sectors 0x08, sector size: 0x00002000
-block 1: sectors 0x1f, sector size: 0x00010000

btw i still only have the one orange light while i am doing this does that matter at all or am i doing it correctly so far

[cockneysean]

Looks good so far mate.

Now you can run the commands to flash the beast...

[m r mawdsley]

thanks goes out 2 g77 and the program he sent me all up and running now only running 2meg but better than none

[G77]

cool, just so i know, did you flash it with SB5101EG77 or the reva?