Autoserve No longer working - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

randomizer · 16-05-09, 07:58 PM

About two or three days ago my internet went off and i was able to figure out that Autoserving the config caused the modem to continuosly scan, so i had to use the default config. I've tried a few with no success still getting 2Mb but its such a big drop from 20 lol.

I'm in Belfast and i'm using Haxorware Version 1.1 Revision 31

Any sugesstions would be much appreciated?

cockneysean · 16-05-09, 07:59 PM

When autoserving you need to enable "TFTP Enforce Bypass"

Check that you have done this and then please post again.

randomizer · 16-05-09, 08:56 PM

Thanks for the reply

Yeah its enabled, I don't even know if i have the right configs I got one from someone here and the others i downloaded through the modem after manually entering them, but that won't work since they are encrypted right? I was using the cmbus-pkg3-nat-any.cm config but noticed in another thread that it has changed.

cockneysean · 16-05-09, 09:14 PM

If your area is now dynamic I am unsure if you will still be able to force.

You'll just need to go woth the config that comes with the MAC, keep trying till you find a 20 meg. But tbh 10 meg is better than nought.

randomizer · 16-05-09, 09:42 PM

I have a 20 meg MAC but it disconnects after 15mins. I heard since they became dynamic you needed to use a 00:02 MAC. I would be more than happy with 10 meg but Virgin have yet to roll out the change from 2Mb to 10Mb here.

lee-ds · 16-05-09, 09:46 PM

You may have to try loads of Macs mate, and different frequency's + settings etc.

cockneysean · 16-05-09, 10:17 PM

Yes as leeds says, when in this situation you really do need to trawl through MAC's but don't get disheartened it does take a while, but once you a hit a good one you'll be sorted.

50pounds · 17-05-09, 03:09 AM

I have yet to find a good 1 haha

one day i guess shame really i did like my 10mb :P fooking 2mb is too slow.. lol

Smurf · 17-05-09, 03:20 AM

Quote:

Originally Posted by lee-ds

You may have to try loads of Macs mate, and different frequency's + settings etc.

Ive tried alot of macs but not frequency's what freq could i try in pure area?

Thanks

sr20 · 17-05-09, 03:27 AM

Quote:

Originally Posted by Smurf

Ive tried alot of macs but not frequency's what freq could i try in pure area?

Thanks

331000000
402750000
299000000

sr20

16-05-09, 07:58 PM	#1 (permalink)
randomizer Junior Member Join Date: Jul 2008 Posts: 8 Thanks: 2 Thanked 0 Times in 0 Posts	Autoserve No longer working About two or three days ago my internet went off and i was able to figure out that Autoserving the config caused the modem to continuosly scan, so i had to use the default config. I've tried a few with no success still getting 2Mb but its such a big drop from 20 lol. I'm in Belfast and i'm using Haxorware Version 1.1 Revision 31 Any sugesstions would be much appreciated?

16-05-09, 07:59 PM	#2 (permalink)
cockneysean Technology Forums Join Date: Nov 2008 Posts: 1,331 Thanks: 78 Thanked 332 Times in 183 Posts	Re: Autoserve No longer working When autoserving you need to enable "TFTP Enforce Bypass" Check that you have done this and then please post again.

16-05-09, 08:56 PM	#3 (permalink)
randomizer Junior Member Join Date: Jul 2008 Posts: 8 Thanks: 2 Thanked 0 Times in 0 Posts	Re: Autoserve No longer working Thanks for the reply Yeah its enabled, I don't even know if i have the right configs I got one from someone here and the others i downloaded through the modem after manually entering them, but that won't work since they are encrypted right? I was using the cmbus-pkg3-nat-any.cm config but noticed in another thread that it has changed. Last edited by randomizer; 16-05-09 at 09:01 PM.

16-05-09, 09:14 PM	#4 (permalink)
cockneysean Technology Forums Join Date: Nov 2008 Posts: 1,331 Thanks: 78 Thanked 332 Times in 183 Posts	Re: Autoserve No longer working If your area is now dynamic I am unsure if you will still be able to force. You'll just need to go woth the config that comes with the MAC, keep trying till you find a 20 meg. But tbh 10 meg is better than nought.

16-05-09, 09:42 PM	#5 (permalink)
randomizer Junior Member Join Date: Jul 2008 Posts: 8 Thanks: 2 Thanked 0 Times in 0 Posts	Re: Autoserve No longer working I have a 20 meg MAC but it disconnects after 15mins. I heard since they became dynamic you needed to use a 00:02 MAC. I would be more than happy with 10 meg but Virgin have yet to roll out the change from 2Mb to 10Mb here.

16-05-09, 09:46 PM	#6 (permalink)
lee-ds Cable Animal Join Date: Dec 2008 Location: The Capital Of Yorkshire Posts: 1,673 Thanks: 163 Thanked 451 Times in 350 Posts	Re: Autoserve No longer working You may have to try loads of Macs mate, and different frequency's + settings etc. __________________ If at first you don't succeed.......flash and flash again!

16-05-09, 10:17 PM	#7 (permalink)
cockneysean Technology Forums Join Date: Nov 2008 Posts: 1,331 Thanks: 78 Thanked 332 Times in 183 Posts	Re: Autoserve No longer working Yes as leeds says, when in this situation you really do need to trawl through MAC's but don't get disheartened it does take a while, but once you a hit a good one you'll be sorted.

17-05-09, 03:09 AM	#8 (permalink)
50pounds Stella Artois Join Date: Apr 2008 Location: Teesside Posts: 960 Thanks: 106 Thanked 151 Times in 116 Posts	Re: Autoserve No longer working I have yet to find a good 1 haha one day i guess shame really i did like my 10mb :P fooking 2mb is too slow.. lol

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
haxorware help	ste0ey	Cable Modems	13	23-04-09 12:57 PM
Modem no longer working!! Please help a noob!	COUGHCOUGH	Cable Modems	22	03-11-08 11:52 PM
DBOX no longer working, tried system scan and lost all channels	minime	DBox/Dreambox	16	30-04-08 09:00 PM
BigMaq toolbar no longer working	Toxic	Eurovox	4	13-04-08 06:31 PM
Nagra Keys no longer working	poo	DBox/Dreambox	6	25-11-07 06:33 PM