Surfboard 5100i - Help

[m r mawdsley]

Hi guys, I have a surfboard 5100i modem here that i have just tried putting haxo 11 rev 31 on it via toms jtag utility and a 2 meg dump but now it has gone off altogether. As soon as it had finished flashing i restarted the modem and all the lights have gone off. When i try to connect to it again it keeps saying error. Can anybody tell me what this means and can it be fixed with jtagging. Any help will be much appreciated guys

[jeeves]

Can you put Hax on a 5100?

I know a 5101 is ok but that is a different chip set

[g80878]

Originally Posted by m r mawdsley

Hi guys, I have a surfboard 5100i modem here that i have just tried putting haxo 11 rev 31 on it via toms jtag utility and a 2 meg dump but now it has gone off altogether. As soon as it had finished flashing i restarted the modem and all the lights have gone off. When i try to connect to it again it keeps saying error. Can anybody tell me what this means and can it be fixed with jtagging. Any help will be much appreciated guys

Get the blackcat cable out mate , you have put a incompatable firmware on , re flash with correct firmware

Originally Posted by jeeves

Can you put Hax on a 5100?

No you can't put haxorware on a 5100 , M R Mawdsley has just found out the hard way , I personally use SIGMA-X2 v15.0-BPI-HACK as all sb5100's down here ( Bristol ) don't get on with the sb5100mod for some reason.

[jeeves]

Yep just found the info

Compatible with all modems that use the BCM3349 chipset

The 5100 has a 3348 chipset

[Danielle]

Originally Posted by jeeves

Yep just found the info

Compatible with all modems that use the BCM3349 chipset

The 5100 has a 3348 chipset

Im using SB5100MoD v1.0.4 Beta on my 5100i works great

[m r mawdsley]

Originally Posted by g80878

Get the blackcat cable out mate , you have put a incompatable firmware on , re flash with correct firmware



No you can't put haxorware on a 5100 , M R Mawdsley has just found out the hard way , I personally use SIGMA-X2 v15.0-BPI-HACK as all sb5100's down here ( Bristol ) don't get on with the sb5100mod for some reason.

hi is there anyway i can get the modem back to its original state, all the lights have gone off. is there a way i can get them back on

[g80878]

Originally Posted by m r mawdsley

hi is there anyway i can get the modem back to its original state, all the lights have gone off. is there a way i can get them back on

Use your black cat cable and program it should still read the chip , then go to the 5100 tab , install the new firmware first , then install the new bootloader , should be up and running again within the hour

[m r mawdsley]

Originally Posted by g80878

Use your black cat cable and program it should still read the chip , then go to the 5100 tab , install the new firmware first , then install the new bootloader , should be up and running again within the hour

it lts me read the chip but when i go to the 5100 tab it starts saying device not detected on the flash and on the bootloader is there any way i can get this modem up and running via jtag.

Any help would be much appreciated

[g80878]

try flashing it with the working file g77 gave you using the flash tab then. As for the jtag i wouldn't know sorry mate , i was brought up on blackcat cables.

[m r mawdsley]

Originally Posted by g80878

try flashing it with the working file g77 gave you using the flash tab then. As for the jtag i wouldn't know sorry mate , i was brought up on blackcat cables.

this has happened since flashing it with g77's file. Is there a way i can unbrick it using blackcat cable.